• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.961-970
• /
• 1997

A numerical method is presented to predict and analyze the shape of a growing billet produced from the "spray forming process" which is a fairly new near-net shape manufacturing process. It is important to understand the mechanism of billet growing because one can obtain a billet with the desired final shape without secondary operations by accurate control of the billet shape, and it can also serve as a base for heat transfer and deformation analysis. The shape of a growing billet is determined by the flow rate of the alloy melt, the mode of nozzle scanning which is due to cam profile, the initial positio of the spray nozzle, scanning angle, and the withdrawal speed of the substrate. In the present study, a theoretical model is first established to predict the shape of the billet and next the effects of the most dominent processing conditions, such as withdrawal speed of the substrate and the cam profile, on the shape of the growing billet are studied. Process conditions are obtained to produce a billet with uniform diameter and flat top surface, and an ASP30 high speed steel billet is manufactured using the same process conditions established from the simulation.imulation.

• The korean journal of orthodontics
• /
• v.35 no.2 s.109
• /
• pp.153-161
• /
• 2005

Tooth movement facilitated by corticotomy and distraction osteoseresis was discussed. In this study, a portion of cortical bone which can provide resistance to tooth movement in alveolar bone was removed Active bone deposition was thor Possible in the tension side. Teeth moved at such a speedy rate as we could not imagine from conventional orthodontic treatment. which lead to the reduction of the total treatment Period Posterior movement of the canine or molar teeth was possible without any side effects such as anchorage loss, root resorption or Periodontal breakdown.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.465-472
• /
• 2004

Tooth movement facilitated by corticotomy and distraction osteogenesis, a new paradigm in orthodontics, was discussed. Molar uprighting was thought to be either difficult or nearly impossible. In this study, a section of cortical bone, which may act as resistance to tooth movement in alveolar bone, was removed. Active bone deposition was also made possible in the tension side This forms the main concept of tooth movement facilitated by corticotomy and distraction osteogenesis. Molars in two cases were uprighted at such a speedy rate as we could not imagine in conventional tooth movement. which lead to reduction of the total treatment period. And molar uprighting was possible without side effects. for example, supraversion oif the tooth or anterior anchorage loss. These were the superior aspects to conventional orthodontics.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.1972-1978
• /
• 2012

The polymer of (2,2-dimethyl-1,3-propanediaminebis(salicylideneaminato))-nickel(II), Ni(saldMp), was deposited on multi-walled carbon nanotubes (MWCNTs) substrate by the route of potential linear sweep. The nano structures of poly[Ni(saldMp)] have been obtained by adjusting the monomer concentration of 0.1, 0.2, 0.5, 1.0 and 1.5 mmol $L^{-1}$. The poly[Ni(saldMp)] prepared in acetonitrile solution with monomer concentration of 1.0 mmol $L^{-1}$ shows the fastest growth rate. The effects of potential window on charge-discharge efficiency and electrodeposition scan number on capacitance performance were discussed. Poly[Ni(saldMp)] prepared with less electrodeposition scans exhibits higher capacitance, but this goes against the improvement of the whole electrode capacitance. Sample with 8 deposition scans is the best compromise with the geometric specific capacitance 3.53 times as high as that of pure MWCNTs, and 1.24 times for the gravimetric specific capacitance under the test potential window 0.0-1.0 V.

• Water for future
• /
• v.27 no.3
• /
• pp.115-121
• /
• 1994

Cohesie sediment movement in estuarine systems is strongly affected by the phenomena of aggregation and flocculation. Aggregation is the process where primary particles are clustered together in tightly-packed formations; flocculation is the process where aggregates and single particles are bonded together to form large particle groups of very low specific density. The size, shape and strength of the flocculants control the rate of deposition and the processes of pollutant exchange between suspended sediments and ambient water. In estuarine waters, suspended sediments above the lutocline form the mobile suspension zone while below the lutocline they form the stationary suspension zone. Suspended particles in the mobile zone are generally in a dispersed state and the controlling forces are the Brownian motion and the turbulent flow fluctuations. In the stationary suspension zone, the driving force is the gravity. This paper discusses the settling and particle flocculation characteristics under quiescient flow conditions. Particles are entering the study domain randomly. Particles in the mobile suspension zone are simulated by using the Smoluchowski's model. Flocs created in the mobil suspension zone are moving into the stationary suspension zone where viscosity and drag effects are important. Utilizing the concepts of the maximum Feret's diameter and the Minkowski's sausage logic, the fractal dimension of the flocs within the stationary suspension is estimated and then compared with results obtained by other studies.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.341-345
• /
• 2008

The SiOC film of carbon centered system was prepared using bistrimethylsilylmethane and oxygen mixed precursor by the chemical vapor deposition. The chemical properties of the SiOC film were analyzed by the contact anlge and FTIR spectra. The dielectric constant of the deposited films decreased after annealing process, and the correlation between the increasing the BTMSM/$O_2$ flow rate ratio and the dielectric constant did not exist. However, the trend of increasing or decreasing of the dielectric constant repeated and there is the correlation ship between the dielectric constant and the Si-O-C bond in the range of $950{\sim}1200\;cm^{-1}$. The dielectric constant decreased between samples with the chemical shift. The lowest dielectric constant was 1.65 at the sample, which was observed the chemical shift.

• Archives of Pharmacal Research
• /
• v.29 no.11
• /
• pp.977-983
• /
• 2006

The objective was to devise an animal model of myocardial infarction (MI) against which cardioprotective drugs might be tested. We describe the effects of nimesulide, a COX experience with development and validation of such a model. The rabbit was chosen in preference to rodents because its heart and cardiac circulation more closely resemble those of human. Thus, the cardiovascular system of anaesthetized male rabbits, 1 to 1.5 kg (n=11), was stressed by a single bolus intravenous injection of isoprenaline (ISP), 65 mg/kg. The effects of the injection were followed for sixteen days and were evaluated in four ways: 1) measurements of creatinine kinase isozyme and troponin-I (TPI) in serum 2) Electrocardiographic (ECG) changes (ST elevation and Q wave development) 3) Cardiac histopathology observed in tissue sections of the isolated of the heart. The histopathological analysis showed that rabbit heart on 2nd day after ISP injection showed changes of coagulation necrosis. Day 4 total coagulation with the loss of nuclear and striation associated with heavy interstitial infiltrate of neutrophils was found. Day 8 after infarction showed collagen deposition with capillary channels in between the remaining islands of myocytes in the infarcted area. On the 16th day scarring was complete. Coronary perfusion rates (CPR) and heart rate (HR) of the infarcted and nimesulide (a COX-2 inhibitor) treated rabbits displayed significant improvement (n=11) on each corresponding day after infarction as compared to the infarcted and saline treated rabbits (P<0.05). All four indices revealed similarities with effects commonly associated with MI in humans.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.732-737
• /
• 2000

Plasma enhanced chemical vapor deposition of $TiO_{2$\pm}{\delta}$ has been carried out using TEMAT [tetrakis(ethylmethylamido) titanium] and $H_2$. Increasing the power from 300 W to 500 W produced the high density plasma, leading to the formation of TiO$_2$films with an increased ratio of Ti to O and a negligible amount of C and N. Applying the bias of 30W to the substrate in creased the growth rate of the film with a slightly increased content of Ti in the film. In addition, $H_2O$ was from either the residual gas in the gase pressure or $H_2(/He)$ gas and actively participated in the formation of $TiO_2$ films. Consequently, Ti ions created in the plasma could be a main contributor to $TiO_2$ formation with a slight amount of $H_2O(~10^{-4}Toor)$ in the ambient, which provided the dissociation of TEMAT.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.56-68
• /
• 1997

This work was intended to study the effect of a partial pressure ratio and a total pressure of reactive gases on the properties of TiC$_{x}$N$_{1-x}$ . coated layer. In this regard, various TiC$_{x}$N$_{1-x}$ coatings were synthesized with C2112 and N2 Mixture gas of different compositions by Arc Ion Plating process which has been highlighted for an industrial purpose. It was revealed from colors and X-ray diffraction patterns that the concentration of carbon of a TiC$_{x}$N$_{1-x}$ coating increases with a partial pressure ratio (PC$_{2}$H$_{2}$/PN$_{2}$) as well as a total pressure Of $C_{2}$H$_{2}$ and N$_{2}$ mixture gas. Accordingly, the hardness of TiC$_{x}$N$_{1-x}$ coated layer increased but the adhesion to the substrate of SKH 51 was degraded. On the other hand, the deposition rate was independent of a partial pressure ratio and a total pressure of mixture gas. It was found that a uniform gas distribution is critical for an industrial application since the composition of a coating depends strongly on the location of a substrate inside of the furnace. As a result of milling tests with different TiC$_{x}$N$_{1-x}$ coated end mills, the one which has a low carbon concentration was better than others studied in this work.d in this work.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.57-69
• /
• 1995

The development of a finite difference model for cross-shore sediment transport prediction in the surf tone due to the storm surge event is presented in this paper. Using the inhomogeneous diffusion equation with moving boundaries. the present numerical model is found to be robust and efficient and does not possess a number of restrictions imposed in Kriebel and Dean's(1985) numerical model. Our numerical model is validated through comparison with the analytical solution. the data of a large-scale experiment and the field data of Hurricane Eloise. The Present model if able to predict the averaged volumetric erosion rate of a beach due to the time-varying real storm surge hydrographs and satisfies the conservation of sediment between eroded volume in the onshore region and deposited volume in the offshore region. In addition. the present model is able to reasonably predict the recession of a beach with wide berm and dune. and can describe the change of a breaking point by the offshore deposition. From the sensitivity analysis or the present numerical model with various input parameters, it is concluded that the present numerical model is able to analyze the beach change in a reliable manner including the effects of different sizes of sediments.