• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.2
• /
• pp.95-104
• /
• 2010

The purpose of this study is to analyze the correlation between physical stream characteristics and bed materials in natural rivers. Accordingly, four natural rivers were selected reference streams, they were Nam river, Sumjin River, Naesung River and Han River. Grain size distributions of bed materials were gravels, cobbles and boulders in Han river and Nam river, were sand, gravels, cobbles and boulders in Sumjin river and were sand in Naesung river. Four reference streams were divided into each two reference reaches (straight and bend) by plan and profile characteristics of naturally meandering stream. Therefore various reference reaches were chosen in the aspect of physical stream characteristics and grain size distributions. The results investigated and analyzed are as follows. The streams that grain sizes distributions of river bed materials were coarse were stable because they had variety of bed slope without sediment deposition, and then the riffles frequency and the physical characteristics were various. Also, velocitydepth regime were various in four kinds, and the response parts for water level change were small, so that channel flow status were stable and excellent condition. On the other hand, sand river that grain sizes distributions of river bed materials were fine had not the variety of parameters as velocity-depth regimes, sediment deposition, channel flow status and riffles frequency, so that the physical stream characteristics were not various.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.1
• /
• pp.159-168
• /
• 2008

A special field experiment has been carried out from March 2001 to June 2001 at the Changhowon in Kyunggi to investigate a better methodology for the estimation of dry deposition of pollutions applicable in Korea. In this study, dry deposition plate was used to measure of total and water soluble acidic mass fluxes, and CPRI(Coarse Particle Rotary Impactor), CI(Cascade Impactor) were also used to measure ambient concentrations in various particle size ranges. Sehmel-Hodgson model was used to estimate dry depostion velocity and Weibull probability distribution function was applied to get generalized particle size distribution for the size fractioned concentration data sampled by CPRI and CI. Atmospheric dry deposition fluxes of mass and ionic matters estimated by the various techniques(one-step, multi-step, equi-concentration, subdivision for only the coarse particle range, applying Weibull distribution function, etc.) were compared to flux data sampled by DDP. It was found out that the deposition fluxes estimation methodology calculated by the each particle size range devided by particle size distribution characteristics and the rapidly changed points of deposition velocity using Weibull probability distribution function was the most applicable.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.725-730
• /
• 2008

In this study, we found out charged particle's deposition characteristic by experiments of $0.5{\mu}m$, $1.0{\mu}m$, $3.0{\mu}m$ size particle's concentration decay. We carried out the experiments on charged particle deposition onto the vertical cleanroom wall panel and some other fundamental experiments. The particle deposition mechanism is consist of sedimentation, convection, diffusion, thermophoresis, electrostatic and so on. Particle size determines mainly working deposition mechanism. The charged particle is made with corona discharge that are constituted field charging and diffusion charging. In addition, this combinational mechanism is called combined charging. The type of corona discharge determines quantity of particle electrical charge. In conclusion, we assumed that quantity of particle electrical charge accelerations deposition velocity onto the vertical cleanroom wall panel and proved it. And we figured out particle's deposition characteristic through compared between our experiment's results.

• Journal of the Korean institute of surface engineering
• /
• v.23 no.2
• /
• pp.18-23
• /
• 1990

Thin films of tin oxide were prepared by chemical vapor deposition (C.V>D) using the hydrolysis reaction of SnCl4, Deposition rate increased with the increase of temperature up to $500^{\circ}C$and then decreased at $700^{\circ}C$, Deposition rate with SnCl4 partial pressure showed RidealEley behavir. It was found that SnO2 thin film deposited at the temperature above $400^{\circ}C$ had(110) and (301) plane preferred orientation with crystallinity of rutite structure. Electrical resisvity of SnO2 thin film decreased with increase increase of deposition temperature and showed minimum value of 10-3 ohm at $500^{\circ}C$and than largely increased increased with further increase of deposition temperture.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.909-911
• /
• 1999

Metalization technology of the fine patterns by electroless plating is required in place of electrodeposition as high-density printed circuit boards (PCB) become indispensable with the miniaturization of electronic components. Electroless nickel plating is a suitable diffusion barrier between conductor metals, such as Al and Cu, and solder is essetional in electronic packaging in order to sustain a long period of service. Moreover, Electroless nickel has particular characteristics including non-magnetic property, amorphous structure, wear resistance, corrosion protection and thermal stability. In this study fundamental aspects of electroless nickel deposition were studied with effect of complexeing agents of different kinds. Then, the property of electroless deposit are controlled by the composition of the deposition solution, the deposition condition such as temperature and pH value and so on. the characteristics of the deposits has been carried out.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2172-2174
• /
• 2005

MgO has been used as the material of the protecting layer for AC PDP. AC PDP is influenced by characteristics of the surface glow discharge on the MgO thin film. Because MgO thin film is practically discharge electrodes, the discharge characteristics of MgO thin film should be varied with the method of deposition. In this study, changing order and time of deposition, we use electron beam evaporation system and R.F reactive magnetron sputtering system in the MgO deposition. Particularly, after using electron beam evaporation system, we use R.F. reactive magnetron sputtering system in the MgO deposition, then we could get lower amount of charge and higher luminance efficiency than only using electron beam evaporation system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.415.1-415.1
• /
• 2016

2009년도에 Perovskite가 태양전지에 처음 적용된 이후, Perovskite를 기반으로 하는 태양전지는 급속한 발전을 이루고 있으나, 향후 상용화를 위해서는 추가적인 공정개선 및 제조 단가를 낮추는 노력이 필수적이다. 초창기 Perovskite의 증착 공정은 One step deposition 방법이 사용되었으나, Layer의 thickness, uniformity 등을 조절하기 어려워 Sequential deposition 방법으로 개선되었다. 하지만 결과적으로 초기방법 대비 추가공정이 발생함에 따라 시간 및 비용의 증가가 불가피하였다. 제조단가 측면에서는 Perovskite 태양전지를 구성하는 재료 중 HTM(정공수송물질)을 구성하는 Spiro-MeOTAD의 비용이 가장 비싸다. 따라서 저비용 태양전지를 위해서는 HTM이 없는 구조가 필요하다. 이 페이퍼에서는 Perovskite 물질이 고흡광 능력 외에 충분한 전하수송능력을 보유한다는 점에 착안하여, Gas Pressure Assisted Modified One Step Deposition을 이용한 HTM Free Perovskite를 제작하고 기존의 Sequential Deposition Method 통해 만들어진 Perovskite 태양전지와 비교/분석하였다.

• YAKHAK HOEJI
• /
• v.29 no.3
• /
• pp.124-129
• /
• 1985

A dissolution characteristics of phenylbutazone deposited on Avicel and dibasic calcium phosphate by solvent deposition method were studied. The solvent deposition was confirmed by scanning electron microscopy. Avicel was superior to dibasic calcium phosphate as excipient in dissolution rate. Total amount of phenylbutazone dissolved from Avicel deposition system at 30minutes were enhanced 1.2-1.6 times compared with physical mixtures of them. The dissolution rate of 10% solvent deposition system was highest and that of 75% solvent deposition system was lowest in Avicel system and dibasic calcium phosphate system. Dissolution profile of commercial products was dependent on manufacturing conditions and dissolution rate of 10% Avicel system was greater than that of commercial products.

• Journal of Pharmaceutical Investigation
• /
• v.12 no.3
• /
• pp.74-87
• /
• 1982

To evaluate the pharmaceutical aspects of solvent deposition method where drug is solvent deposited on the surface of excipients, a study has been made on dissolution characteristics of indomethacin solvent deposited on lactose and potato starch. In a solvent deposition system, the drug-to-excipient ratio and kind of excipient effect much on dissolution rates of indomethacin. The experimental results are as follows: 1) Lactose was shown to be superior to potato starch as excipients in indomethacin solvent deposited. 2) Total amount of indomethacin dissolved from solvent deposition systems at 30 minutes were enhanced about 5 to 23 times compared with that of pure indomethacin. 3) Increased dissotion amount of indomethacin from the solvent deposition systems were observed to be alike in the systems where the drug-to-excipient weight ratios were 1 : 5, 1 : 7 and 1 : 10.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.6
• /
• pp.279-286
• /
• 2008

Numerical analysis is done to investigate which would be the most influencing process parameter in determining the uniformity of deposition thickness in TiN ICP-CVD(inductively coupled plasma chemical vapor deposition). Two configurations of ICP antenna are modeled; side and top planar. Side and top gas inlets are considered with each ICP antenna geometries. Precursor for TiN deposition was TDMAT(Tetrakis Diethyl Methyl Amido Titanium). Two step volume dissociation of TDMAT is used and absorption, desorption and deposition surface reactions are included. Most influencing factors are H and N concentration dissociated by electron impact collisions in plasma volume which depends on the relative positions of gas inlet and ICP antenna generated hot plasma region. Low surface recombination of N shows hollow type concentration, but H gives a bell type distribution. Film thickness at substrate edges is sensitive to gas flow rate and at high pressures getting more dependent on flow characteristics.