• Nuclear Engineering and Technology
• /
• 제26권2호
• /
• pp.237-246
• /
• 1994

KMRR 노심의 열수력 설계 및 안전 해석을 위한 고유량 CHF 상관식을 개발하였다. 상관식 개발에는 fin이 부착된 경우와 부착되지 않은 경우의 가열봉에 대한 단일봉 CHF 실험 자료를 사용하였다. 상관식은 Reynolds 수, 열역학 평형 건도, 액상과 기상의 밀도비 및 등가수력 직경비 등의 무차원 변수로 이루어져 있으며, fin이 있는 경우와 없는 경우의 가열 둘레비를 사용하여 fin의 영향을 고려하였다. 이처럼 단일봉에 대하여 개발된 상관식의 KMRR 핵연료 집합체에 대한 적용 타당성을 보이기 위하여 비가열면 및 축방향 비균일 출력 분포의 영향을 논의하였다. CHF 실험 자료 분석 결과, 상관식 한계 DNBR은 1.44로 결정되었다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.161-171
• /
• 2016

OBJECTIVES : Many roadway departure crashes on the freeway interchange are due to the running speed being greater than the design speed. This study aims to ensure a safe and pleasant driving experience for the driver by increasing the superelevation based on the running speed on the highway interchange ramp. METHODS : The mean running speed for each type of ramp is calculated on site survey more than 10 interchanges. Using the mean running speed, we calculated the superelevation and the side friction using the method given in "A Policy on Geometric Design of Highways and Street" (Pages 145-166, 2001). Then, we applied the modified method to the superelevation range. Finally, we ensured safety using the Degree of Safety that is proven by the centrifugal acceleration ratio as suggested by Joseph Craus (1978). RESULTS : The mean running speeds are 50 km/h and 65 km/h when the design speeds are 40 km/h and 50 km/h, respectively. After the application of the new method used in this study, the superelevation will be increased by 9.0% and 10.0% when the mean running speeds are 50 km/h and 65 km/h, respectively. CONCLUSIONS : A higher superelevation can give the driver a more comfortable and safe driving environment. However, the driver needs to be aware of snow and low-temperature conditions.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.169-179
• /
• 2014

PURPOSES : This study is to conduct the research on the design principle for the driver's safety and comfort in installing consecutive curves of superhighway. METHODS : Superhighway does not currently exist in domestic area. Thus, this study is conducted by collecting driving behavior usage of 30 people who are involved in the members of the virtual driving simulation. By identifying the distribution characteristics of each scenario in ANOVA & Tukey Test, the distribution are categorized into three groups. RESULTS : In the case of Group A in Section 3 (R2 entry part), lane departure exceeds the safety standard, which means to be risky condition. And then in the case of Group B and C, the lane departure values applying theoretical formula was evenly distributed compared to the proven values. CONCLUSIONS : Based on the result, the continuous curve design principles at superhighway should follow three standards as follow. First, an additional linear part needs to be inserted between two curves. Second, what if inserting the linear part is difficult, it would be better to insert a curve more than 2,000m. Third, R1/R2 ratio should not be over two. This design primarily aims to the safety of the operator. Such road alignment also meets the expectations of drivers, thus, it may help drivers to be compatible and amenable while driving continuous curve in superhighway.

• 한국운동역학회지
• /
• 제27권4호
• /
• pp.269-278
• /
• 2017

Objective: The purpose of this study was to develop a goal setting method for increasing the probability of a holed in a side inclined putting stroke. Method: Three-dimensional video data was recorded at a frequency of 120 hz per second after synchronizing 19 infrared motion capture systems (Qualisys, Gothenburg, Sweden). Putting green used a polycarbonate plate ($1.2{\times}2.4{\times}0.01meter$) with coefficient of friction (${\mu}=0.062$) and a real curve of the actual hole. Results: The velocity ratio between the club and the ball was 1:1.6 under various ball speed conditions in this study. The overall position of the break is 1 m to 1.4 m from the point where the ball leaves. If there is a slope, the ball follows the target line by the straightening force, and when it reaches 1 m position, the straightening force decreases by 30~50% and reaches to the deviation (break) point which is severely influenced by the slope. From here, the ball is aimed in a direction other than the target, and the size is affected by the slope. Conclusion: If there is a side slope, the ball moves away from the straight line, and the larger the slope, the closer the break point is to the starting point of the ball. Therefore, it is necessary to calculate the degree of departure according to the slope carefully, and it is preferable that the slower the speed is, the more the influence of the slope becomes. It is preferable to use the center of the hole as a reference when calculating the departure.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.503-517
• /
• 1995

강제대류 천이비등 열유속을 보다 실제 적으로 예측하기 위한 역학적 모델을 개발하였다. 이 모델은 가열된 벽면 근처를 어떤 기포기둥(Vapor Blanket)이 통과할 때 일어나는 다단계 비등과정 즉, 임계 기포기둥의 형성, 기포기둥밑의 미소액막(Macrolayer)의 기화 및 고갈, 그리고 얇은 기체막에서 일어나는 불안정한 막비등과정에 기초하였다. 핵비등이탈점 (DNB )과 막비등이탈점 (DFB)사이의 천이비등 곡선상의 열유속은 임계 기포기둥이 주어진 벽면을 통과할 동안 상기한 각 비등과정의 지속 시간비(Time Fraction)를 각 비등열유속에 곱한 후 그것을 합하여 정량화하였다. 이 모델의 예측치를 현재까지 발표된 문헌들에 나타난 실험치와 비교한 결과, 본 모델은 저건도 및 10 bar 근처의 고압조건의 실험치를 잘예측하는 것으로 나타났다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2276-2296
• /
• 2022

This study validates the applicability of the CUPID code for simulating subcooled wall boiling under high-pressure conditions against number of DEBORA tests. In addition, a new numerical technique in which the interfacial momentum non-drag forces are calculated at the cell faces rather than the center is presented. This method reduced the numerical instability often triggered by calculating these terms at the cell center. Simulation results showed good agreement against the experimental data except for the bubble sizes in the bulk. Thus, a new model to calculate the Sauter mean diameter is proposed. Next, the effect of the relationship between the bubble departure diameter (D_dep) and the nucleation site density (N) on the performance of the Wall Heat Flux Partitioning (WHFP) model is investigated. Three correlations for D_dep and two for N are grouped into six combinations. Results by the different combinations show that despite the significant difference in the calculated D_dep, most combinations reasonably predict vapor distribution and liquid temperature. Analysis of the axial propagations of wall boiling parameters shows that the N term stabilizes the inconsistences in D_dep values by following a behavior reflective of D_dep to keep the total energy balance. Moreover, ratio of the heat flux components vary widely along the flow depending on the combinations. These results suggest that separate validation of D_dep correlations may be insufficient since its performance relies on the accompanying N correlations.

• Journal of Chest Surgery
• /
• 제55권6호
• /
• pp.452-461
• /
• 2022

Background: Extracorporeal membrane oxygenation (ECMO) can be used in patients with refractory cardiogenic shock or respiratory failure. In South Korea, the need for transporting ECMO patients is increasing. Nonetheless, information on urgent transportation and its outcomes is scant. Methods: In this retrospective review of 5 years of experience in ECMO transportation at a single center, the clinical outcomes of transported patients were compared with those of in-hospital patients. The effects of transportation and the relationship between insertion-departure time and survival were also analyzed. Results: There were 323 cases of in-hospital ECMO (in-hospital group) and 29 cases transferred to Hallym University Sacred Heart Hospital without adverse events (mobile group). The median transportation time was 95 minutes (interquartile range [IQR], 36.5-119.5 minutes), whereas the median transportation distance was 115 km (IQR, 15-115 km). Transportation itself was not an independent risk factor for 28-day mortality (odds ratio [OR], 0.818; IQR, 0.381-1.755; p=0.605), long-term mortality (OR, 1.099; IQR, 0.680-1.777; p=0.700), and failure of ECMO weaning (OR, 1.003; IQR, 0.467-2.152; p=0.995) or survival to discharge (OR, 0.732; IQR, 0.337-1.586; p=0.429). After adjustment for covariates, no significant difference in the ECMO insertion-departure time was found between the survival and mortality groups (p=0.435). Conclusion: The outcomes of urgent transportation, with active involvement of the ECMO center before ECMO insertion and adherence to the transport protocol, were comparable to those of in-hospital ECMO patients.

• 대한교통학회지
• /
• 제36권3호
• /
• pp.203-215
• /
• 2018

본 연구는 통행자의 통행패턴이 도착지의 토지이용패턴에 따라 변화하는 특징을 반영하여 대규모 동적 O/D를 구축하는 방법을 제안하였다. 기존 동적 O/D 추정 방법 관련 연구들을 살펴보면 자료수집의 어려움으로 소규모 지역에 국한하여 적용 가능하거나, 고속도로망 혹은 대중교통망 등 특정 교통망에 제한하여 O/D를 구축하는 등 한계가 존재한다. 이에 본 연구에서는 빅데이터 시대에 발맞추어 쉽게 수집, 이용이 가능한 교통 관련 자료들을 기반으로 분석 지역의 범위 제약 없이 동적 O/D를 추정하는 기법을 제시하였다. 군집 분석(Clustering Analysis) 기법을 이용하여 군집별 도착시간 기준 통행분포 비율로 출발시간 통행분포 비율을 산정하고 첨두 출발시간 분포함수를 추정하였다. 추정된 분포함수를 조사자료에 적용하여 비교 검증을 진행해본 결과 통계적으로 유의하게 나타났다.

• 대한토목학회논문집
• /
• 제35권5호
• /
• pp.1103-1110
• /
• 2015

거가대로 개통 이후 거제로의 당일관광비율이 22.6%에서 48.6%까지 증가했는데, 부산울산권 및 대구경북권 등 영남권이 직접영향권으로 그 중 8개 도시는 기존 거제대교에서 신설 거가대교로 경로가 전환되었다. 본고에서는 거가대로 개통 전후 당일관광통행이 가능한 출발권역의 범위를 비교하기 위해 정규분포함수를 이용하여 거제 방문관광객 체류시간의 편차를 표현하였다. 또한 회유행동에 기초한 비교적 단순한 가정을 통하여 당일관광 통행모형을 제시하였다. 그 결과, 거가대로 개통 후 최소권역이 개통 전 평균권역과 같고, 개통 후 평균권역이 개통 전 최대권역과 동일한 것으로 나타나, 거가대로 개통에 따른 접근성 개선효과를 알 수 있었다. 덧붙여 상대적으로 중장거리에 위치한 도시가 거가대로 개통에 따른 접근성 개선효과의 수혜가 컸고, 단거리에 위치한 도시는 접근성 개선효과가 크지 않지만 모든 지역민이 거제로의 당일관광이 가능하게 된 것으로 분석되었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.316-321
• /
• 1997

The mixing vane effect on the Critical Heat Flux (CHF) is discussed with focus on the vortex now effect. In the subchannel approach, this effect is not quantified by the calculation model, but directly taken into account by the CHF correlation itself through data analysis. The vortex now effect is identified the two Westinghouse correlations, and then the CHF margin issue given rise to by the Vantage-5H design change is evaluated and discussed. It is noted that deficiency about CHF dependency on the vortex flow effect could induce an error in the Departure from Nucleate Boiling Ratio (DNBR) sensitivity Calculation.