• 대한치과의사협회지
• /
• 제53권12호
• /
• pp.958-966
• /
• 2015

Objective: Sodium hypochlorite (NaOCl) decreases the bond strength of resin composite. The purpose of this study was to compare the effect of antioxidant and superficial dentin surface removal on the microtensile bond strength of NaOCl-treated dentin. Materials and Methods: Twenty non-carious human third molars were used in this study. The dentin surfaces were treated with 5.25% NaOCl for 10 min, followed either by treatment with 10% ascorbic acid or superficial dentin surface removal. Two-step self-etch adhesive and resin composite were used for restoration. The bonded specimens were subjected to the microtensile bond strength test. Statistical analysis was performed using one-way analysis of variance (ANOVA) and Tukey's test (p < 0.05). Results: The bond strength after removal of the superficial dentin surface following NaOCl irrigation was similar to that in the control group. The group treated with 10% ascorbic acid demonstrated significantly higher bond strength than the other groups. Conclusion: NaOCl irrigation-induced reduction in dentin bond strength could be recovered by either treatment with 10% ascorbic acid or simple removal of the superficial dentin surface.

• Restorative Dentistry and Endodontics
• /
• 제4권1호
• /
• pp.11-16
• /
• 1978

This experimental study was made to investigate the effect of the "Hi-Pol" composite resin on the human dental pulp. 38 cavities of healthy permanent teeth were divided into 5 groups which were used as experimental materials. Group 1: Zinc Oxide-Euginol paste was applied to the cavities as controls $\cdots\;\cdots8$ cases Group 2: "Hi-Pol"*filling with Dycal** base $\cdots\;\cdots9$ cases Group 3: "Hi-Pol" filling without Dycal base $\cdots\;\cdots9$ cases Groud 4: Adaptic*** filling with Dycal base $\cdots\;\cdots6$ cases Group 5: Adaptic filling without Dycal base $\cdots\;\cdots6$ cases The treated teeth were extracted after 1 week, 2 weeks, 3 weeks and 4 weeks and processed for histological study. The results obtained from this experimental study were as follows; 1. The controls applied zinc oxide-eugenol showed the minimal pulp response and group 3 and group 5 showed the most severe pulp response. 2. In group 3 and group 5, the severity of pulp response increased in intensity according to the time elapsed. 3. In group 2 and group 4, the mild pulp response was found in earlier stage and the repairing process could be observed in later stage. * Boo-Pyung Co., Korea ** L. D. Caulk Co., Milford, Del. 19963 *** Johnson and Johnson Co., New Brunswick, NJ 08903.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.23.1-23.9
• /
• 2019

Objectives: The aim of this study was to investigate the microshear bond strength (${\mu}SBS$) of different universal adhesive systems applied to hybrid computer-aided design/computer-aided manufacturing (CAD-CAM) restorative materials repaired with a composite resin. Materials and Methods: Four types of CAD-CAM hybrid block materials-Lava Ultimate (LA), Vita Enamic (VE), CeraSmart (CS), and Shofu Block HC (SH)-were used in this study, in combination with the following four adhesive protocols: 1) control: porcelain primer + total etch adhesive (CO), 2) Single Bond Universal (SB), 3) All Bond Universal (AB), and 4) Clearfil Universal Bond (CU). The ${\mu}SBS$ of the composite resin (Clearfil Majesty Esthetic) was measured and the data were analyzed using two-way analysis of variance and the Tukey test, with the level of significance set at p < 0.05. Results: The CAD-CAM block type and block-adhesive combination had significant effects on the bond strength values (p < 0.05). Significant differences were found between the following pairs of groups: VE/CO and VE/AB, CS/CO and CS/AB, VE/CU and CS/CU, and VE/AB and CS/AB (p < 0.05). Conclusions: The ${\mu}SBS$ values were affected by hybrid block type. All tested universal adhesive treatments can be used as an alternative to the control treatment for repair, except the AB system on VE blocks (the VE/AB group). The ${\mu}SBS$ values showed variation across different adhesive treatments on different hybrid CAD-CAM block types.

• 대한치과의사협회지
• /
• 제57권5호
• /
• pp.264-268
• /
• 2019

Objectives: This study aimed to measure the water sorption / solubility of Biodentine, composite resin and glass ionomer cement. Materials and Methods: The materials used in this study were Biodentine(BD), Filtek Z250(FZ) and Ketac Molar(KM). Twenty disc-shaped specimens of each material were prepared of 6mm diameter and 1mm thickness. All specimens were desiccated for 24 hours and weighed(m1). After then, They were immersed in distilled water and stored at $37^{\circ}C$. 1 week later, They were washed with running water, wiped with absorbent paper and weighed(m2). Finally, They were dried for 24 hours and weighed(m3). Water sorption and solubility, net water uptake were calculated. Results: KM and BD showed high water sorption than FZ(P<0.05). KM and BD exhibited similar water sorption(P<0.05). BD exhibited high solubility than KM(P=0.012). BD exhibited high net water uptake than FZ(P=0.008). Conclusion: Biodentine showed higher water sorption, solubility and net water uptake than Filtek Z250 and Ketac Molar. Within limitation of this study, it is not recommended to use Biodentine for permanent restoration.

• The Journal of Advanced Prosthodontics
• /
• 제4권2호
• /
• pp.103-108
• /
• 2012

PURPOSE. Debonding of a composite resin core of the fiber post often occurs at the interface between these two materials. The aim of this study was to evaluate the effects of different surface treatment methods on bond strength between fiber posts and composite core. MATERIALS AND METHODS. Sixty-four fiber posts were picked in two groups (Hetco and Exacto). Each group was further divided into four subgroups using different surface treatments: 1) silanization; 2) sandblasting; 3) Treatment with 24% $H_2O_2$, and 4) no treatment (control group). A cylindrical plexiglass matrix was placed around the post and filled with the core resin composite. Specimens were stored in 5000 thermal cycles between $5^{\circ}C$ and $55^{\circ}C$. Tensile bond strength (TBS) test and evaluation using stereomicroscope were performed on the specimen and the data were analyzed using two-way ANOVA, Post Hoc Scheffe tests and Fisher's Exact Test (${\alpha}$=.05). RESULTS. There was a significant difference between the effect of different surface treatments on TBS ($P$ <.001) but different brands of post ($P$=.743) and interaction between the brand of post and surface treatment ($P$=.922) had no significant effect on TBS. Both silanization and sandblasting improved the bonding strength of fiber posts to composite resin core, but there were not any significant differences between these groups and control group. CONCLUSION. There was not any significant difference between two brands of fiber posts that had been used in this study. Although silanization and sandblasting can improve the TBS, there was not any significant differences between surface treatments used.

• 폴리머
• /
• 제31권2호
• /
• pp.141-147
• /
• 2007

치아 수복용 충전제로서 인체 뼈의 주성분인 수산화인회석(hydroxyapatite)이 혼성화된 바륨실리케이트 (barium silicate, BaSi)를 사용하여 제조한 고분자 복합체의 치과적 물성을 분석하였다. 복합체 제조에 사용된 아크릴계 기재는 가시광선을 사용하여 경화시켰다. 실험 결과, 혼성화된 충전제 내에서의 BaSi 함량이 증가할수록 복합체의 기계적 강도는 일정하게 증가하였으며 치의학에서 규정한 값들을 상회하여 치아 수복재료로 충분한 값임을 확인할 수 있었다. 그러나 충전제 내에서의 BaSi 함량 증가에 따른 복합체의 내마모도는 약간 감소하였다. 한편, 복합체의 중합깊이는 충전제의 구성비에 관계없이 $6\sim9mm$ 정도로서 일반적 치과용 수복재료로 충분한 값들임을 확인하였으며 중합전환율과 중합수축률은 충전제 구성비에의 직접적 의존 경향성은 거의 없음을 확인할 수 있었다.

• 대한치과기공학회지
• /
• 제2권1호
• /
• pp.55-59
• /
• 1980

이와 같은 세 기술은 많은 도재용착주조관의 수리에 이용된다고 할 수 있고 이런 기술은 완전한 보철물을 다시 만들지 않고 연장된 도재용착주조관의 수리에 적용할 수 있는 것이다. 금속덮개(over casting)와 핀에서 유지를 얻는 금속 전장판에 의한 수리의 성공은 다시 제작한 도재용착주조관의 그것과 비교할 만하다. 그러나 도재에 합성수지(composite resin)를 결합시켜 수리하는 방법은 합성수지(composite resin)가 도재보다 잘 닳을 뿐만 아니라 색깔의 안정성도 좋지 않으며 도재가 금속판에 용착될 때 창조되는 결합력보다 silance bonding agent를 사용하여 창조되는 결합력 즉 화학적 결합(chemical bond)이 약하기 때문에 좋다고 할 수는 없다. 그러므로 silance bond repair에 관한 연구는 앞으로도 여러분들과 함께 더욱 더 연구할 과제가 아닌가 생각되는 바입니다.

• 대한치과의사협회지
• /
• 제49권1호
• /
• pp.33-37
• /
• 2011

The esthetic demands are growing in treatment of primary maxillary incisors as well as permanent ones. There is something dissatisfying about in the keen eyes of the pediatric dentists on their esthetic results of efforts because current tooth color system is created for the purpose of the application to the permanent incisors. In this study using the scientific color measurement device, I would like to introduce a color scheme for the primary maxillary incisors and suggest clinical tips for the better results of resin composite restorations.

• 대한치과의사협회지
• /
• 제25권11호통권222호
• /
• pp.1019-1028
• /
• 1987

결손된 치질과 변색된 법랑질을 수복하기 위해 많은 재료와 술식이 개발되어왔다. 즉 silicate cement, PMMA resin, BISGMA composite resin, glass ionomer cement, porcelain등이 이용되어 왔으나 이것들은 biocompatible하지 않아 이상적인 재료는 아니다. 따라서 인간의 결손된 enamel을 수복할 수 있는 새로운 생역학적인 재료가 필요하게 되었다. 필자는 최근 관심의 대상이 되고 있는 porcelain laminate veneer system(층상 도재 전장관)에 관하여 문헌을 중심으로 고찰해 보고자 한다(국내에서는 장완식 교수께서 1987년 6월10일 보철학교실 세미나에서 video tape를 통해 소개한바 있음). 여기서는 Hobo, Iwata(1985)등이 소개한 castable apatite ceramic material을 이용한 laminate veneer술식에 관해 기술하고 내화성 모형(refractory cast)을 이용한 laminate술식과 비교 기술하고자 한다.

• 산업기술연구
• /
• 제35권
• /
• pp.31-34
• /
• 2015

The purpose of the study was to investigate the mechanical properties (diametral tensile strength, flexural strength, compressive strength, Vickers hardness) of 4 kinds of composit resins; Bis-GMA based composit, Bis-EMA based composit, Bis-GMA/UDMA based composit, and Bis-EMA/UDMA based composit, The composit resin based Bis-GMA showed stronger mechanical properties than Bis-EMA. It was found that the addition of UDMA to both Bis-GMA based composit and Bis-EMA based composit highly improved mechanical properties. However, the mechanical properties of the composit resins prepared in this study were lower than those of the commercialized products in market(Charmfil flow(Denkist), Quadrant flow(CAVEX)), since the composit resins prepared in this study has much lower inorganic filler content of 43wt% comparing with 50~70wt% inorganic filler content of the commercialized products.