• International Journal of Oral Biology
• /
• v.32 no.1
• /
• pp.35-43
• /
• 2007

Tooth loss in elderly is mainly caused by alveolar bone loss via severe periodontitis. Although the severity of periodontitis is known to be affected by age, the aging process or the genetic changes during the aging of periodontal tissue cells are not well characterized. In this study, we investigated the effect of in vitro aging on the change of gene expression pattern in periodontal fibroblasts. Gingival fibroblasts (GF) and periodontal ligament fibroblasts (PDL) were obtained from two young patients and replicative senescence was induced by sequential subcultivation. When more than 90% cells were positively stained with senescence-associated ${\beta},-galactosidase$, those cells were regarded as aged cells. In aged GF and PDL, the level of phosphorylated retinoblastoma (RB) and $p16^{INK4A}$ protein was significantly decreased and increased, respectively. However, the protein level of p53 and p21, well known senescence-inducing genes, did not increase in aged GF and PDL. Although $p27^{Kip1}$ and $p15^{INK4B}$, another cyclin-dependent kinase inhibitors, were reported to be involved in replicative senescence of human cells, they were decreased in aged GF and PDL. Because senescent cells showed flattened and enlarged cell shape and are known to have increased focal adhesion, we examined the protein level of several integrins. Aged GF and PDL showed increased protein level of integrin ${\alpha}2$, ${\alpha}v$, and ${\beta}1$. When the gene expression profiles of actively proliferating young cells and aged cells were compared by cDNA microarray of 3,063 genes and were confirmed by reverse transcription-polymerase chain reaction, 7 genes and 15 genes were significantly and commonly increased and decreased, respectively, in aged GF and PDL. Among them, included are the genes that were known to be involved in the regulation of cell cycle, gene transcription, or integrin signaling. The change of gene expression pattern in GF and PDL was minimally similar to that of oral keratinocyte. These results suggest that $p16^{INK4A}/RB$ might be involved in replicative senescence of periodontal fibroblasts and the change of gene expression profile during aging process is cell type specific.

• Applied Microscopy
• /
• v.39 no.4
• /
• pp.325-332
• /
• 2009

It has been well known that grapefruit seed extract (GSE) have effects on the deodorization and a wide range disinfectant. But anybody do not research about the decomposition-inhibition effect of GSE. The present study was performed to investigate the decomposition-inhibition effect of GSE by measuring the microscope and electroscope observation with passage of time. A total of 30 healthy Sprague-Dawley (SD) rats weighting from 230 gm to 250 gm were used as experimental animals. One group that do not treated by GSE named control group and the other group that treated by 55% GSE named Experimental group. Under ether anesthesia, right kidney was obtained. Put each sample in $37^{\circ}C$ and humidity $80{\pm}5%$ incubator, we obtained each sample after 0 day, 1 day, 2 days, 3 days, 4 days and 5 days. 4 ${\mu}m$ of paraffin sections were obtained, stained H-E stain and observed by use of a microscope. Morphological change in tissue was similar to control 1 day group and experimental 3 days group. Therefore, decomposition-inhibition effect of GSE continued about 2 days and it protected necrosis. According to above results, the author suggest that 55% GSE is an effective decomposition inhibitor until 2 days on $37^{\circ}C$ and humidity $80{\pm}5%$ conditions.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.1
• /
• pp.51-61
• /
• 2011

Recently, restoring implants in the esthetically demanding region, zirconia-based materials are widely used due to their superior mechanical properties, accuracies, and esthetics. The purpose of this study was to investigate the load transfer and mechanical stability of zirconia and titanium implant abutments by using the three-dimensional finite element analysis model. The internal conical joint type and external butt joint type implant system was selected as an experimental model. Finite element models of bone/implant/prosthesis complex were constructed. An load of 250N was applied vertically beside 3mm of implant axis. Stress distribution of zirconia and titanium implant abutment is similar. The maximum equivalent stress of titanium implant abutment is lower than zirconia implant abutment about 15%. Howevere considering a high mechanical strength that exceed those of titanium implant abutment, zirconia implant abutment had similar mechanical stability of titanium implant abutment clinically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.2
• /
• pp.82-89
• /
• 2013

Purpose: The present study is aimed to evaluate the combined effect of recombinant human bone morphogenetic protein 2 (rhBMP-2) and recombinant human vascular endothelial growth factor (rhVEGF) coated onto anodized implants on osseointeration. Materials and methods: Six New Zealand white rabbit were used in this study. Each animal received 4 implants that were either coated with rhBMP-2 and rhVEGF (Study group) or anodized implant (Control group) in both tibia. This was performed using a randomized split-mouth design. A total 24 implants were used. The implant stability quotient (ISQ) value using resonance frequency analyser and removal torque (RTQ) measurement were investigated at 2 and 8 weeks. The t-test was used for statistical analysis (${\alpha}$=.05). Results: Control and study group showed good osseointegration at 8 weeks. The ISQ and RTQ values of study group were significant compared with the control group at 8 weeks (P<.05). However, No statistical significance was observed at 2 weeks (P>.05). Conclusion: It was concluded that rhBMP-2 with rhVEGF coated onto anodized implants can induce better osseointegration at late healing period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2023-2028
• /
• 2014

The main purpose of this study is to explore the factors related to the performance of industry-university cooperation and determine methods for improving activation of industry-university cooperation. The data was collected by questionnaire survey mailed to the participating researcher and university professors which executed the university-industry cooperation projects. We determined cronbach Alpha Coefficient, pearson's correlation coefficient and multiple regression analysis. According to multiple regression analysis, reflect of mutual needs and local industry construction have statistically significant relationships with general satisfaction of university. Knowledge and working ability of industry-university cooperation, activeness of industry-university cooperation activity, Local economy scale and local industry construction have statistically significant relationships with general satisfaction of industry. In relation continuity, activeness of industry-university cooperation activity and information exchange have statistically significant relationships with relation continuity of university. Knowledge and working ability of industry-university cooperation and activeness of industry-university cooperation activity have statistically significant relationships with relation continuity of industry. In outcome utilization, knowledge and working ability of industry-university cooperation, research establishment and apparatus have statistically significant relationships with outcome utlization of university. In conclusion, capability factors, cooperative factors, political factors and external environment factors affected industry-universiry cooperation. Knowledge and working ability of industry-university cooperation will be able to upgrade on general satisfaction, relation continuity and outcome utilization.

• Restorative Dentistry and Endodontics
• /
• v.36 no.6
• /
• pp.483-489
• /
• 2011

Objectives: The purpose of this study was to examine the effect of glycerin topical application on the surface hardness of composite after curing. Materials and Methods: A composite (Z-250, 3M ESPE) was packed into a disc-shaped brass mold and light cured according to one of the following protocols. Group 1 (control) was exposed to air and light cured for 40 sec, group 2 was covered with a Mylar strip and light cured for 40 sec, group 3 was surface coated with glycerin and light cured for 40 sec, and group 4 was exposed to air and light cured for 20 sec and then surface coated with glycerin and cured for additional 20 sec. Twenty specimens were prepared for each group. The surface hardnesses of specimens were measured with or without polishing. Five days later, the surface hardness of each specimen was measured again. Data were analyzed by three-way ANOVA and Tukey's post hoc tests. Results: The surface hardnesses of the unpolished specimens immediately after curing decreased in the following order: group 2 > 3 > 4 > 1. For the polished specimens, there was no significant difference among the groups. Within the same group, the hardness measured after five days was increased compared to that immediately after curing, and the polished specimens showed greater hardness than did the unpolished specimens. Conclusions: The most effective way to increase the surface hardness of composite is polishing after curing. The uses of a Mylar strip or glycerin topical application before curing is recommended.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4686-4693
• /
• 2012

The present study was conducted to identify the factors related to the hypertension, and to offer the evidence of 1st prevention of hypertension. 2,230 male workers aged 30-59 years were observed the relationships between hypertension and age, BMI, glucose intolerance, smoking, alcohol drinking, regular exercise, eating habits using data from health check-ups in 2011. As a results, the incidence rate of hypertension was 18.8% of 30-39 year old group, 23.8% of 40-49 year old group, 33.0% of 40-49 year old group. The incidence rate of hypertension was significantly higher as age and BMI ascend, and it was higher in the group of abnormal glucose intolerance, regular alcohol intake, no regular exercise than their respective counterparts. The multivariable-adjusted odds ratio of hypertension increased significantly as there is an increase in age, and the group of abnormal glucose intolerance, smoking, regular alcohol intake, no regular exercise. In conclusion, obesity, glucose intolerance, alcohol intake, and physical inactivity are risk factors for hypertension, therefore we need the control of these factors for 1st prevention of hypertension.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.535-542
• /
• 2000

The purpose of this study was to find the characteristics of the frontal natural head position(NHP) of patients with facial asymmetry, and to contribute to the diagnosis of facial asymmetry in the clinical examination of orthodontic patients. Twenty adult patients who had apparent facial asymmetry and no severe sagittal skeletal discrepancy were selected as the asymmetry group, and 21 young adults who had symmetric faces were selected as the symmetry group. Frontal cephalograms were obtained in the state of NHP using a pivot-mounted fluid level device. The degree of the menton deviation was defined as the angle between the line drawn through crista galli and anterior nasal spine and the line drawn through crista galli and menton. The following angles were measured and each of them was compared with the degree of the menton deviation one is the angle between the true vertical line and the supra-orbital line which is a tangent line to the extreme cranial point on the supra-orbital margin, and the other is the angle between the true vertical line and the cervical line drawn through the midpoint of atlas and the 4th cervical vertebra. Through the statistical analysis, following results were obtained. 1. The angle between the supra-orbital line and the true vertical line was much mote deviated from the right angle in the asymmetry group than in the symmetry group. 2. The angle between the cervical line and the true vertical line in the asymmetry group showed greater tendency than in the symmetry group, but the difference was not statistically significant. 3. In the asymmetry group, the degree of the menton deviation was positively correlated with the angle between the supraorbital line and the true vertical line. The above results suggest that racial asymmetry patients show the tendency to have the tilted NHP to compensate the deviation of menton position.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.543-552
• /
• 2000

The purposes of this study were to evaluate the reproducibility of posteroanterior(PA) cephalograms obtained by two methods, the Head Posture Aligner(HPA) method in natural head posture and the conventional method(operator-guided method), and to compare the vertical rotational differences of the head Posture between lateral and PA cephalograms according to the method. The sample was consisted of 30 adults. At first day, a PA cephalogram and a lateral cephalogram were obtained from each subject by two methods to investigate the difference of vertical rotational posture between lateral and PA cephalograms. Two weeks later, another PA cephalogram was obtained using each method to evaluate the reproducibility of head posture. Five height measurements and nine width measurements were used in the paired t-test to compare the reproducibility of the PA cephalometric measurements between two methods. The differences of vertical rotational posture between lateral and PA cephalograms were calculated from a computer program and compared according to the method used, and following results were obtained. 1. Height measurements obtained by operator-guided method showed significant differences according to the time interval and revealed low reproducibility. 2. Height measurements obtained by HPA method did not show significant differences according to the time interval and presented high reproducibility. 3. In the comparison of width measurement, two methods did not show distinct differences in reproducibility. 4. The difference of vertical rotational posture between lateral and PA cephalograms showed $0.8^{\circ}$ in the HPA method, more less than $2.5^{\circ}$ in the operator-guided method. The results of the present study suggest that the HPA may be helpful in the PA cephalometric radiography in terms of reproducibility.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.23-31
• /
• 2004

As a research method that weighs and combines evidence, meta analysis produces evidence that is more powerful than the original studies. The purpose of this study was to compare the jntercanine/intermolar expansion and rapid/slow expansion in the maxillary expansion treatment using meta analysis. Medline was searched from 1979 to 2000 for all studies examining the stability of transverse expansion of the human maxilla, and 388 articles were found. Then these articles were reduced to 7 based on the defined inclusion and exclusion criteria, and a cumulative Meta evaluation score was computed for each study. The results were as follows; 1. The mean expansion in intermolar width was 6.0mm. of the 6.0mm, 4.8mm was retained and $20.0\%(1.2mm)$ was relapsed while wearing retainers. 2. In intercanines width, the mean expansion was 3.7mm. of the 3.7mm, 2.6mm was retained and $29.7\%(1.1mm)$ was relapsed while wearing retainers. 3. The differences In the amount of expansion and relapse between rapid expansion group and slow expansion group were less than $6\%(0.1-0.3mm)$. But, there might be differences in the skeletal/dental exapnsion ratios according to the expansion method.