• Korean Journal of Veterinary Research
• /
• v.24 no.2
• /
• pp.183-193
• /
• 1984

In this study lactating female rabbits and strains of coliforms previously isolated from the cases of acute and chronic mastitis in dairy cattle were employed. The pathological changes were observed on the mastitis experimentally induced with the coliform strains and the mamary glands after infusions of E. coli suspension together with dexamethasone, dextran iron or transferrin were grossly and microscopically observed. From the results reported, the following points are concluded. In the bacterial suspension-infused groups by E. coli, K. pneumoniae and Ent. aerogenes, respectively, the affected quarters of udder showed grossly swelling, hyperemia, hemorrhage, focal necrosis and firmness. The microscopic findings of early stage of the mastitis were appearance of large numbers of heterophils in the glandular lumina and ducts accompanied by degeneration, necrosis and desquamation of epithelial cells and also infiltration of heterophils, hemorrhage and edema in the interstitial tissue and destruction of alveoli. Later, proliferation of fibroblasts, plasma cells, lymphocytes, eosinophils and macrophages appeared in the glandular tissue and with these cells necrotic foci of glandular tissue were surrounded by highly proliferated connective tissue. In addition, granulomatous inflammatory changes could be observed in the glandular tissue from the 7th day after infusion. The difference of the inflammatory response among the groups did not recognized. In the groups infused with dexamethasone and E. coli suspension the inflammatory response was slighter at the inflammatory change with alveolar destruction and hemorrhage was more rapid and severer than E. coli alone. Also in the groups infused with dextran iron and E. coli suspension the inflammatory change was more rapid and severer than E. coli alone and the histological changes were not recognized in the groups infused with dextran iron alone. Reaction of the iron staining was diffusely strong positive within the glandular alveolar lumina in the groups of dextran iron alone, hut was slightly positive toward epithelial cells in the groups of dextran iron and E. coli infusion. In the group infused with transferrin and E. coli suspension, the inflammatory response was tighter, but the peroxidase activity of the heterophils in the glandular lumina was more or less stronger than E. coli alone.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.3
• /
• pp.193-202
• /
• 2004

Distraction osteogenesis(DO) is defined as a gradual mechanical process of mechanical stretching two vascularized bone surface apart with a critical rate and rhythm such that new bone forms within the expanding gap, reliably bridges the gap, and ultimately remodels to normal structure. DO has become a mainstay in bone tissue engineering and has significantly improved our armamentarium for reconstructive craniomaxillofacial procedures. But the molecular and biological mechanisms that regulate the formation of new bone during distraction osteogenesis are not completely understood. BMPs are potent osteoinductive agents. Our hypothesis was that BMPs, especially BMP-2 and BMP-4, might play an importent role in the signaling pathways that link the mechanical forces created by distraction to biological responses and in promting new bone formation. Using a rabbit's mandible, we investigated the expression of BMP-2, -4 at different time points during distraction osteogenesis. The purpose of this study is to research the pattern of expression of BMP-2, -4 in new bone formation during distraction osteogenesis of the rabbit mandible. The experimental group was applied gradual distraction (0.7mm a day by twice a day, 4.9mm in total, for 7 days) and the control group was carried out osteotomy alone. They were examined clinically, histologically, and by RT-PCR analysis. On 3 days after osteotomy, the high level of expression of BMP-2, -4 was detected. But, the expression of BMP-4 was decreased during latency period. As distraction was started, its expression was increased and maintained till postoperative 28days. In control group, the expression of BMP-4was remarkably decreased till postoperative 14 days. On the other hand, the expression of BMP-2 was no difference between experimental group and control group. The expression of BMP-4 was maintanined at high level during the entire experimental period in both group. These findings suggested that excellent bone formation during distraction osteogenesis is associated with enhanced expression of BMP-4 genes by mechanical tension stress.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.1
• /
• pp.99-107
• /
• 2008

Objective : The objective of this review was to provide reliable comparative results regarding the effectiveness of any interventions either open or closed that can be used in the management of fractured mandibular condyle Patients and Methods : Research of studies from MEDLINE and Cochrane since 1990 was done. Controlled vocabulary terms were used. MeSH Terms were "Mandibular condyle" AND "Fractures, bone". Only comparative study were considered in this review using the "limit" function. According to the criteria, two review authors independently assessed the abstracts of studies resulting from the searches. The studies were divided according to some criteria, and following were measured: Ramus height, condyle sagittal displacement, condyle Towns's image displacement, Maximum open length, Protrusion & Lateral excursion, TMJ pain, Malocclusion, and TMJ disorder. Results : Many studies were analyzed to review the post-operative result of the two methods of treatment. Ramus height decreased more in when treated by closed reduction as opposed to open reduction. Sagittal condyle displacement was shown to be greater in closed reduction. Condyle Town's image condyle displacement had greater values in closed reduction. Maximum open length showed lower values in closed reduction. In protrusive and lateral movement, closed reduction was less than ORIF. Closed reduction showed greater occurrence of malocclusion than ORIF. However, post-operative pain and discomfort was greater in ORIF. Conclusion : In almost all categories, ORIF showed better results than CRIF. However, the use of the open reduction method should be considered due to the potential surgical morbidity and increased hospitalization time and cost. To these days, Endoscopic surgical techniques for ORIF (EORIF) are now in their infancy with the specific aims of eliminating concern for damage to the facial nerve and of reducing or eliminating facial scars. Before performing any types of treatment, patients must be understood of both of the treatment methods, and the best treatment method should be taken on permission.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.99-105
• /
• 2012

Purpose: The change of the marginal bone around dental implants have significance not only for the functional maintenance but also for the esthetic success of the implant. The purpose of this study was to investigate the load transfer of internal conical joint type implant according to marginal bone resorption by using the three-dimensional finite element analysis model. Materials and methods: The internal conical joint type system was selected as an experimental model. Finite element models of bone/implant/prosthesis complex were constructed. A load of 300 N was applied vertically beside 3 mm of implant axis. Results: The pattern of stress distribution according to marginal bone resorption was similar. The maximum equivalent stress of implant was increase according to marginal bone resorption and the largest maximum equivalent stress was shown at model of 1 mm marginal bone resorption. Although marginal bone loss more than 1mm was occurred increasing of stress, the width of the stress increase was decreasing. Conclusion: According to these results, the exposure of thin neck portion of internal conical joint type implant is most important factor in stress increasing.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.1
• /
• pp.87-101
• /
• 2012

Bruxism is extensively defined as a diurnal or nocturnal parafunctional habit of tooth clenching or grinding. The etiology of bruxism may be categorized as central factors or peripheral factors and according to previous research results, central factors are assumed to be the main cause. Bruxism may cause tooth attrition, cervical abfraction, masseter hypertrophy, masseter or temporalis muscle pain, temporomandibular joint arthralgia, trismus, tooth or restoration fracture, pulpitis, trauma from occlusion and clenching in particularly may cause linea alba, buccal mucosa or tongue ridging. An oral appliance, electromyogram or polysomnogram is used as a tool for diagnosis and the American Sleep Disorders Association has proposed a clinical criteria. However the exact etiology of bruxism is yet controversial and the selection of treatment should be done with caution. When the rate of bruxism is moderate or greater and is accompanied with clinical symptoms and signs, treatment such as control of dangerous factors, use of an oral appliance, botulinum toxin injection, pharmacologic therapy and biofeedback therapy may be considered. So far, oral appliance treatment is known to be the most rational choice for bruxism treatment. For patients in need of esthetic correction of hypertrophic masseters, as well as bruxism treatment, botulinum toxin injection may be a choice.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.65-74
• /
• 2018

The aim of this study was to obtain the traceability of the software used to analyze lateral cephalometry and to calculate the uncertainty of the measurements. Furthermore, this study aimed to provide a basis for obtaining standard references for measurement values for orthodontic treatment in children. Cephalometric data were collected from 100 children diagnosed with class I malocclusion between the ages 6 to 13 years who visited the pediatric dentist at Seoul National University Dental Hospital. To ensure traceability, a phantom device was created. Correction values were calculated by measuring the length and angle of the phantom device using the software. Type A uncertainty was calculated by obtaining the standard deviation of cephalometric measurements of 100 persons and the standard error of repeated measurements. Determination of the type B uncertainty was induced by minimum resolution and the position of the head. Using these, the combined standard uncertainty was obtained and the expanded uncertainty was calculated. The results of this study confirm that the currently used software has high accuracy and reliability. Furthermore, the uncertainty of orthodontic measurements in Korean children aged 6 to 13 years was calculated, and distribution range for class I malocclusion with 95% confidence interval was suggested.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.511-518
• /
• 2020

The purpose of this study is to emphasize the importance of the safety and health ability to safely protect body in a risky situation in infancy, but due to the lack of a valid test tool for measuring infant safety knowledge, measure the safety and health knowledge of infants. In order to achieve the purpose of the study, opinions of education experts and early childhood education experts were collected, and suitable factors for measuring safety and health knowledge of children aged 3-5 years were extracted. The measurement questions developed based on this were surveyed on 186 children aged 3-5 years old to verify the relevance of the question composition and the reliability of the contents. In the distribution of the item response, values of 0.8 or less were deleted, and items with a correlation of r<.40 or less were also deleted, and the reliability test showed more than .70. After exploratory factor analysis, it was developed into 23 questions in 3 areas. The total score of safety and health knowledge for the final question and the degree of correlation were above .80. The tool for measuring child safety and health knowledge developed in this study was confirmed to be appropriate for item discrimination, item reliability, and content validity, and thus will be used as basic data for measuring child safety and health knowledge. After the early childhood safety and health education program is implemented, Further research should verify the effectiveness of the early childhood safety and health program.

• Journal of Technologic Dentistry
• /
• v.37 no.3
• /
• pp.121-127
• /
• 2015

Purpose: This study was intended to investigate the effect of applying liner for chemical bonding and physical surface roughness created on zirconia by using a sandpaper before sintering on the bond strength between the two materials. Methods: Zirconia blocks were cut using a low-speed cutter. Plate-shaped specimen($6mm{\times}6mm{\times}3mm$) was fabricated by sintering after giving surface roughness according to four kinds of sandpapers. Depending on whether or not to use liner, 60 specimens were divided into two groups ZN(non-liner), ZL(liner), and the two groups were subdivided into four groups respectively in accordance with sandpaper used, totaling eight groups (n=10). The surface roughness (Ra) values and shapes before sintering were observed, and shear bond strength after pressing ceramic plasticity was measured with a universal testing machine. For a test of the significance, a one-way ANOVA was performed, and Tukey's multiple comparison test was conducted. Results: The observation of the surface roughness was SB04($2.22{\pm}1.16{\mu}m$), SB08($2.98{\pm}0.33{\mu}m$), SB12($2.44{\pm}1.32{\mu}m$), SB20($2.34{\pm}0.59{\mu}m$) and SA04($2.34{\pm}0.67{\mu}m$), SA08($1.28{\pm}0.90{\mu}m$), SA12($2.03{\pm}1.60{\mu}m$), SA20($2.19{\pm}1.73{\mu}m$). In the case of ZN Group, the shear bond strength was ZN04($23.26{\pm}3.83MPa$), ZN08($21.76{\pm}2.33MPa$), ZN12($20.49{\pm}3.01MPa$), ZN20($24.98{\pm}4.22MPa$)(p<0.05). As for ZL Group, the shear bond strength was ZL04($25.09{\pm}5.67MPa$), ZL08($22.98{\pm}2.26MPa$), ZL12($21.54{\pm}5.70MPa$), ZL20($23.98{\pm}3.23MPa$)(p<0.05). Conclusion: The research results showed that the bond strength of Zirconia core and Pressing ceramic was further improved by physical surface treatment before sintering, rather than by chemical bonding through liner surface treatment.

• The korean journal of orthodontics
• /
• v.32 no.1 s.90
• /
• pp.59-69
• /
• 2002

The purpose of this study was to evaluate the reproducibility of lateral cephalometric landmarks according to radiographic image enhancement, and to contribute to the identification of cephalometric landmarks. Lateral cephalograms of ten individuals were taken and stored into computer. The images were then enhanced up to four grades by Quick Ceph Image Pro$^{TM}$ on condition that the gray-scale equalization number was 50 and the detail enhancement number was 50. After thirty two landmarks were identified on monitor images by five observers, the deviations from the mean, the distances estimated between identified points and the mean point of five identified points, were evaluated for each landmark at each enhancement grade. Through the statistical analysis, following results were obtained. 1. In case of unenhanced radiographic images, the inter-observer reproducibility of the landmarks showed a large variation. 2. The comparison of deviation from the mean according to the degree of radiographic image enhancement for each landmark showed that the inter-observer reproducibility was significantly different at 5 landmarks. 3. The landmark of pterygomaxillary fissure showed higher reproducibility at enhancement grade 1 and 2 images than at unenhanced images. So did the landmark of posterior nasal spine at enhancement grade 1 images, and the landmark of menton at enhancement grade 2, 3 and 4 images respectively. The above results suggest that the reproducibility of some landmarks can be increased by radiographic image enhancement during the identification of the lateral cephalometric landmarks on the monitor.

• The korean journal of orthodontics
• /
• v.38 no.1
• /
• pp.5-12
• /
• 2008

Objective: This study was designed to analyze the primary and secondary stability characteristics of orthodontic mini-screws of tapered design when compared with the cylinder mini-screw. Methods: A total of 48 mini-screws were placed into the buccal alveolar bone of the mandible in 6 male beagle dogs. Comparison was made between tapered and cylinder type mini-screws (Biomaterials Korea, Seoul, Korea). Maximum insertion torque (MIT) was measured using a torque sensor (Mark-10, MGT 50, USA) during installation, and maximum removal torque (MRT) was recorded after 3 and 12 weeks of loading. Results: Taper mini-screws showed a higher MIT value of 22.3 Ncm compared with cylinder mini-screw showing 13.6 Ncm (p < 0.001). The MRT of the taper mini-screw showed a significantly higher value of 9.1 Ncm than those of cylinder mini-screw of 5.7 Ncm at 3-weeks after installation (p < 0.05). However, there was no difference in the MRT value between the taper and cylinder mini-screws at 12 weeks of loading. Conclusions: These results showed that the high insertion torque of the taper mini-screw design increases initial stability until 3 weeks of loading, but does not have any effect on the secondary stability at 12 weeks of loading.