목적: 치과 기공용 연마기 휠을 소독하기 위한 클로르헥시딘의 농도에 따른 캔디다균의 감염방지효과에 대해 알아보고자 하였다. 연구 재료 및 방법: 동일한 모형에서 제작된 상악 총의치를 캔디다균에 감염시키고, 서로 다른 농도의 클로르헥시딘 용액에 1시간 보관한 연마 휠과 멸균된 퍼미스와 증류수를 이용하여, 치과기공용 연마기로 연마하였다. 이후 멸균된 상악 총의치를 연이어 연마한 뒤 연마한 부위를 면봉으로 채취하여, 재배양후 칸디다균의 여부를 확인하였다. 결과: 클로르 헥시딘을 적용한 연마휠은 농도에 관계 없이 감염의 전파가 일어나지 않았으나, 증류수만을 사용한 연마휠에서는 감염의 전파가 나타났다. 결론: 의치 연마기 휠의 감염방지를 위해 클로르헥시딘 용액은 효과적이다.
목적: 치과용 연마기를 통한 캔디다균의 2차 감염성 여부를 알아보고자 하였다. 연구 재료 및 방법: 동일한 모형에서 제작된 상악 총의치를 캔디다균에 감염시키고, 멸균된 퍼미스와 휠 증류수를 이용하여, 치과기공용 연마기로 연마하였다. 이후 멸균된 상악 총의치를 연이어 연마한 뒤연마한 부위를 면봉으로 채취하여, 캔디다균을 배양하였다. 연마한 휠은 3일동안 상온에 노출시켜 24시간 간격으로 캔디다균의 잔존여부를 측정하였다. 결과: 연마한 멸균 총의치에서 다수의 캔디다균이 발견되었으며, 연마한 휠에서는 2일까지 캔디다균이 검출되었다. 결론: 의치 연마를 위한 치과기공용 연마기를 사용시 캔디다균의 감염가능성이 있기 때문에 감염방지책이 필요하다.
Purpose: The objective of this study was to compare the surface roughness according to polishing process in conventional laboratory techniques used for polishing three different acrylic denture base resins. Materials and methods: Specimen preparation and surface polishing procedures were conducted to manufacturer's recommendation with three heat-polymerized denture base resins. Surface roughness and gloss were measured by a contact type tester and a LED gloss checker using thickness 2 mm and diameter 10 mm. There were five specimens for each acrylic resin material and polishing procedures. Mean average surface roughness (Ra) values of each specimen group were analyzed using a one-way ANOVA analysis of variance and Scheffe's post hoc test. Surfaces after surface roughness and gloss testing according to each polishing process were evaluated under a stereoscopic microscope. Results: The highest mean average surface roughness was measured($Ra=2.43{\pm}0.47$) for surfaces finished with a denture tungsten carbide bur in Triplex. The lowest surface roughness values ($Ra=0.11{\pm}0.07$) were determined in Vertex polished with a lathe. In addition, all materials revealed that surface roughness determined highly in HP1 and HP2 than other procedures. All correlation between surface roughness and gloss showed highly with three heat-polymerized resins. Specially, topmost correlation revealed than other material in Triplex. Significant differences in mean average surface roughness were found between polishing process used high speed lathe and low speed hand-piece. Conclusion: Laboratory polishing used to high speed was found to produce the smoothest surface of heat-polymerized denture base acrylic resin. Therefore, we recommended that high polishing process need to get smooth surface.
연구 목적: 본 연구는 탄성의치 제작 시 주로 사용되는 polyamide를 수종의 연마방법을 사용하여 처리 후 $Candida$$albicans$의 부착정도와 표면거칠기를 비교하고자 하였다. 연구 재료 및 방법: $25{\times}15{\times}2mm$ 크기의 polyamide 시편을 4군으로 나누어 연마재를 사용하여 기공용 lathe 연마하는 방법(기공실내 연마방법)과 각기 다른 2종의 실리콘 포인트로 진료실내 연마하는 방법, 그리고 실리콘포인트 연마 후 pumice로 연마하는 방법으로 처리하였다. $C.$$albicans$의 부착성을 평가하기 위해 $5{\times}10^6CFU/ml$의 $C.$$albicans$ 현탁액에 시편을 2시간 동안 침적하였고 5회 수세처리 후 한천배지에서 배양하였다. 그리고 주사전자 현미경(JSM-5900, JEOL LTd., Tokyo, Japan) 촬영을 시행하였다. Profilometer (Surf-pak; Kawasaki, Japan)를 이용하여 표면거칠기를 측정하였고 통계처리를 위하여 SPSS 18.0 프로그램을 사용하였다. 일원변량분석으로 비교 분석하였고 사후 검증은 $C.$$albicans$의 부착성 검증을 위해 Scheffe test를 시행하였으며 표면조도검증을 위해 Tamhane's T2 test를 시행하였다(${\alpha}$=.01). 결과: 최대 거칠기 값을 보인 군은 2단계의 연마용 버를 사용한 것으로 $0.32{\mu}m{\pm}0.10$ 값을 나타냈으며, 가장 낮은 거칠기 값을 보인 것은 tungsten carbide를 사용하지 않고 기공용 lathe로만 연마를 한 군으로 $0.02{\mu}m{\pm}0.00$의 거칠기 값을 나타냈다. $C.$$albicans$ 부착 실험에서는 기공용 lathe만을 이용한 연마방법이 가장 적은 부착수를 보였으며 다른 세 군과 유의한 차이가 발견되었다($P$<.01). 결론: 표면거칠기 및 미생물 부착능 실험 결과 기공실 연마만을 시행한 경우 유의하게 낮은 거칠기 값과 부착율을 보였다. Pumice로 추가 연마한 군은 진료실연마를 시행한 군에 비해 낮은 거칠기 값을 보였으나 $C.$$albicans$ 부착에 있어서는 유의한 차이를 보이지 않았다($P$>.01).
It was the purpose of this study to investigate the fracture mode of dental amalgam by observing the crack propagation, and to relate this to the microstructure of the amalgam. Caulk 20th Century Regular, Caulk Spherical, Dispersalloy, and Tytin amalgam alloys were used for this study. After each amalgam alloy and Hg measured exactly by the balance was triturated by the mechanical amalgamator (Capmaster, S.S. White), the triturated mass was inserted into the cylindrical metal mold which was 4 mm in diameter and 12 mm in height and was pressed by the Instron Universal Testing Machine at the speed of 1mm/min with 120Kg. The specimen removed from the mold was stored in the room temperature for a week. This specimen was polished with the emery papers from #100 to #200 and finally on the polishing cloth with 0.06${\mu}Al_2O_3$ powder suspended in water. The specimen was placed on the Instron testing machine in the method similar to the diametral tensile test and loaded at the crosshead speed of 0.05mm/min. The load was stopped short of fracture. The cracks on the polished surface of specimen was examined with scanning electron microscope (JSM-35) and analyzed by EPMA (Electron probe microanalyzer). The following results were obtained. 1. In low copper lathe-cut amalgam, the crack went through the voids and ${\gamma}_2$ phase, through the ${\gamma}_1$ phase around the ${\gamma}$ particles. 2. In low copper spherical amalgam, it was observed that the crack passed through the ${\gamma}_2$ and ${\gamma}_1$ phase, and through the boundary between the ${\gamma}_1$ and ${\gamma}$ phase. 3. In high copper dispersant (Dispersalloy) amalgam, the crack was found to propagate at the interface between the ${\gamma}_1$ matrix and reaction ring around the dispersant (Ag-Cu) particles, and to pass through the Ag-Sn particles. 4. In high copper single composition (Tytin) amalgam, the crack went through the ${\gamma}_1$ matrix between ${\eta}$ crystals, and through the unreacted alloy particle (core).
연구 목적: 본 연구는 연마 술식에 따른 polymethyl methacrylate (PMMA)의 표면 거칠기의 차이를 비교하고, 광중합 광택제가 PMMA의 표면 거칠기에 주는 영향과 이후 칫솔질에 의한 거칠기의 변화를 알아보는데 그 목적이 있다. 연구 재료 및 방법: 총 60개의 $10{\times}10{\times}5\;mm$ 크기의PMMA 시편을 만들었다. 중합 방법 (압력 하 중합과 대기압 하 중합)과 표면 연마 방법 (기계적 연마와 화학적 연마)에 따라 대조군을 포함하여 각 10개씩 총 6군으로 나누었다. 기계적 연마는 카바이드 덴처버로 표면 마무리 한 후, 러버 포인트와 퍼미스를 이용하여 하였으며, 화학적 연마는 표면 마무리 후 광중합 광택제 ($Plaquit^{(R)}$; Dreve-Dentamid GMBH)를 도포하여 실시 하였다. 연마가 완료된 후 비 접촉식 3차원적 표면 형상 분석장치인 Accura $2000^{(R)}$으로 표면거칠기를 측정하였으며, 그 3차원적 영상을 얻었다. 그 후 칫솔질에 의한 마모의 영향을 평가하기 위해 초음파 전동 칫솔을 이용하여 각 시편당 칫솔질을 행하고 다시 Accura $2000^{(R)}$에 의한 표면 분석을 시행하였으며, 거칠기의 정도는 Ra 값으로 표시하였다. 연마 후와 칫솔질 후의 표면 거칠기를 비교하기 위한 통계적 분석은 Mann-Whitney test와 t-test를 이용하여 95% 유의수준에서 실시하였다. 결과: 화학적 연마군은 기계적 연마군에 비해 통계적으로 유의한 작은 평균 표면 거칠기 값을 보였으며 (P = .0045), 일반 대기압 하에서 중합시킨 군에서 그 차이가 더 크게 나타났다 (P = .0138). 초음파 전동 칫솔에 의한 모의 칫솔질 후 표면 거칠기는 기계적 연마군을 제외한 모든 군에서 크게 증가하였으며, 칫솔질 후의 표면 거칠기는 각 군에서 통계적으로 유의한 차이를 보이지 않았다. 결론: 비록 칫솔질에 의한 마모의 영향으로 표면 거칠기가 증가하기는 하지만, 화학적 연마가 기계적 연마에 비해 우수한 표면 거칠기를 보인다고 할 수 있다.
The purpose of this study is to identify the phases of four different types, low-copper lathe cut (Type II, class 1) and spherical (Type II, class 2) amalgam alloys which are made by Caulk company and high copper Dispersalloy (Type II, class 3) made by Johnson & Johnson and Tytin (Type I, class 2) made by S.S. White and to determine the Vickers hardness number on the individual phase and four different types of dental amalgam. After each amalgam alloy and Hg measured exactly by the balance was triturated by the mechanical amalgamator (De Trey), the triturated mass was inserted into the cylindrical metal mold which was 4 mm in diameter and 12mm in height and was pressed by the Instron Universal Testing machine (Model 1125) at the speed of 1mm/minute with 143$kg/cm^2$ according to the A.D.A. Specification No. 1. The Specimen removed from the mold, mounted and stored in the room temperature for 7 days. The speciman was polished with the emery paper from #220 to #1200 and finally on the polishing cloth with 0.3 and 0.05 um $Al_2O_3$ powder suspended in water. And then each specimen was etched by Allan's method and washed with Sodium Bisulfinite for 30 seconds. Finally differentiation and metallography on each phase were obtained by using metallographical microscope (Versamet, Union) and microhardness was obtained by using microhardness tester (MVH-2, Torsee). The results were as follows: 1. In the low-copper amalgam, the ${\gamma}$, ${\gamma}_1$ and ${\gamma}_2$ phase were observed and in the high-copper amalgam, the ${\gamma}$, ${\gamma}_1$. ${\epsilon}$ and ${\eta}$ phases were observed but ${\gamma}_2$ phase was not observed. 2. Among the microhardness of each amalgam phase measured under pressing a vickers diamond indenter with 2.0gm load for 30 seconds, e phase has the highest V.H.N (314 ${\pm}$ 20), and in low-copper amalgam 12 phase has the lowest V.H.N. (29${\pm}$1) and ${\eta}$ phase which was observed in high-copper amalgam has 230${\pm}$13 V.H.N and this phase is considerd to contribute to strengthen the handness in amalgam. 3. The V.H.N. measured under pressing a Vickers diamond indenter with 300.0gm load for 30 seconds in low-copper amalgam was lower than that of high-copper amalgam.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.