• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.324-332
• /
• 2009

The purpose of this study was to investigate the effect of rigidity of post core systems on stress distribution by the theoretical technique, finite element stress-analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia ceramic crown were prepared and 1.5 mm ferrule height was provided. Each model contained cortical bone, trabecular bone, periodontal ligament, 4 mm apical root canal filling, and post-and-core. Six combinations of three parallel type post (zirconia ceramic, glass fiber, and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. A 50 N static occlusal load was applied to the palatal surface of the crown with a $60^{\circ}$angle to the long axis of the tooth. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. An increase of the elastic modulus of the post material increased the stress, but shifted the maximum stress location from the dentin surface to the post material. Buccal side of cervical region (junction of core and crown) of the glass fiber post restored tooth was subjected to the highest stress concentration. Maximum von Mises stress in the remaining radicular tooth structure for low elastic modulus resin core (29.21 MPa) was slightly higher than that for high elastic modulus resin core (29.14 MPa) in case of glass fiber post. Maximum displacement of glass fiber post restored tooth was higher than that of zirconia ceramic or stainless steel post restored tooth.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.1
• /
• pp.15-24
• /
• 2001

The purpose of this study is to evaluate the tissue response in applying of various bone substitutes included toothash-plaster mixture, resorbable hydroxylapatite (HA) and demineralized freeze-dried bone and to show the clinical usefulness of toothash-plaster mixture for the repair of craniomaxillofacial bone defect. For this experiment, 100 Sprague-Dawley rats weighing 200gm or more were used. There were four experimental groups: group I, toothash-plaster mixture; group II, demineralized freeze-dried bone; group III, resorbable HA; and group IV, control group. A full thickness, round bone defect measuring 10mm in diameter was created in the midcranium, and the substitutes cited above were embedded in the experimental rats based on their group assignment. Blood clot was filled in the rats assigned to the control group. Experimental rats were sacrificed on the 1st, 3rd, 5th, 8th, 12th and 24th week after implantation and stained with the hematoxylineosin, Masson's Trichrome, using Van Gieson's stain method, and were examined under light microscope. The results were as follows: 1. In all the groups, prominent inflammatory reaction and the infiltration of multinucleated giant cells were noted during the early stage. Gradual healing decreased this reaction. 2. Among the rats in the experimental group II, which were given demineralized freeze-dried bone implants, active formation of new bone traveculae manifested. Chondroid tissues appeared, and it was suggested that the defect was filled with newly formed bone by virtue of osteoinductive activity. On the 12th week after the experiments, most of the defect was filled with newly formed bone trabeculae. 3. In experimental groups I and III, it was noted that HA manifested a healing process similar to that characterized by the toothash-plaster mixture, but inflammatory reaction was more prominent in experimental group I. Active osteoblasts were observed along the periphery of osteoid tissues, while newly formed bone trabeculae appeared adjacent to the implanted materials three weeks later. Formation increased to the extent that newly formed bone trabeculae fused directly with the host bone. Increase in new bone ingrowth into the filling materials was revealed by both experimental groups. 4. In the control group, new bone formation adjacent to the host bone was observed, but most of the defect was filled with mature connective tissue 24 weeks after the experiments.

• Journal of Marine Bioscience and Biotechnology
• /
• v.7 no.2
• /
• pp.58-70
• /
• 2015

Injectable RGD-bioconjugated Mussel Adhesive Proteins (RGD-MAPs) composite hydroxypropyl methylcellulose (HPMC) hydrogels provide local periodontal tissue for bone filling in periodontal surgery. Previously we developed a novel type of injectable self-supported hydrogel (2 mg/ml of RGD-MAPs/HPMC) based porcine nano hydroxyapatite (MPH) for dental graft, which could good handling property, biodegradation or biocompatibility with the hydrogel disassembly and provided efficient cell adhesion activity and no inflammatory responses. Herein, the aim of this work was to evaluate bone formation following implantation of MPH and collagen membrane in rabbit calvarial defects. Eight male New Zealand rabbits were used and four circular calvarial defects were created on each animal. Defects were filled with different graft materials: 1) collagen membrane, 2) collagen membrane with MPH, 3) collagen membrane with bovine bone hydroxyapatite (BBH), and 4) control. The animals were sacrificed after 2 and 8 weeks of healing periods for histologic analysis. Both sites receiving MPH and BBH showed statistically increased augmented volume and new bone formation (p < 0.05). However, there was no statistical difference in new bone formation between the MPH, BBH and collagen membrane group at all healing periods. Within the limits of this study, collagen membrane with MPH was an effective material for bone formation and space maintaining in rabbit calvarial defects.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.1
• /
• pp.19-29
• /
• 2002

The purpose of this study was to compare the polymerization shrinkage and the compressive strength of composite and compomer cured with two different light sources ; conventional halogen-light curing unit and recently-developed plasma arc curing unit. The 'strain gauge method' was used for determination of polymerization shrinkage and the compressive strength was measured by universal testing machine. The results of the present study can be summarized as follows: 1. Filling materials in polyethylene molds showed the initial expansion in the early phase of polymerization. This was followed by the rapid contraction in volume during the first 60 seconds and gradually diminished as curing process continued. 2. The polymerization shrinkage in tooth samples was generally lower than in the mold samples. 3. The generally lower amount of linear polymerization shrinkage was observed in compomer and plasma arc curing unit group when compared to composite and conventional curing unit. 4. The higher compressive strength values was found in composite groups regardless curing methods. The results of this study strongly support the application of plasma arc system and fluoride-containing compomer in the field of clinical pediatric dentistry claiming its effectiveness in curing the esthetic dental materials and the anticariogenic capacity.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.2
• /
• pp.228-237
• /
• 2001

It is well known that glass-ionomer cement and compomer can release fluoride which can inhibit the progression of dental caries. The purposes of this study were to evaluate whether the fluoride from fluoride-containing filling materials can penetrate the dentin bonding adhesive and the dentin bonding adhesive can increase the bond strength of resin-modified glass ionomer. The amount of fluoride release from resin-modified glass ionomer and compomer was measured during 28 days of period and statistically analyzed by t-test. The bond strength of each material with/without dentin bonding adhesive was measured and also statistically analyzed by t-test. The distribution of fluoride from each material into the tooth was explored by electron probe microanalysis system(EPMA). The experimental teeth used were second primary molars about to exfoliate. The amount of fluoride release from each material was diminished by dentin bonding adhesive during 28 days(p<0.05) and the bond strength was not increased by dentin adhesive in resin-modified glass ionomer. The bond strength of group VI was not detectable. The distribution of fluoride from each material into teeth was according to dentino-enamel junction and dispersed into pulp from pulpal floor. The widest distribution was shown in resin-modified glass ionomer cement filled without the application of dentin bonding adhesive.

• Restorative Dentistry and Endodontics
• /
• v.34 no.6
• /
• pp.467-476
• /
• 2009

The aim of this study was to measure the dentinal tubular fluid flow (DFF) during and after amalgam and composite restorations. A newly designed fluid flow measurement instrument was made. A third molar cut at 3 mm apical from the CEJ was connected to the flow measuring device under a hydrostatic pressure of 15 $cmH_2O$. Class I cavity was prepared and restored with either amalgam (Copalite varnish and Bestaloy) or composite (Z-250 with ScotchBond MultiPurpose: MP, Single Bond 2: SB, Clearfil SE Bond: CE and Easy Bond: EB as bonding systems). The DFF was measured from the intact tooth state through restoration procedures to 30 minutes after restoration, and re-measured at 3 and 7days after restoration. Inward fluid flow (IF) during cavity preparation was followed by outward flow (OF) after preparation, In amalgam restoration, the OF changed to IF during amalgam filling and slight OF followed after finishing. In composite restoration, application CE and EB showed a continuous OF and air-dry increased rapidly the OF until light-curing, whereas in MP and SB, rinse and dry caused IF and OF, respectively. Application of hydrophobic bonding resin in MP and CE caused a decrease in flow rate or even slight IF. Light-curing of adhesive and composite showed an abrupt IF. There was no statistically significant difference in the reduction of DFF among the materials at 30 min. 3 and 7 days after restoration (p > 0.05).

• Journal of Yeungnam Medical Science
• /
• v.22 no.1
• /
• pp.62-71
• /
• 2005

Background: This study examined the oral health condition of diabetic patients and evaluated the oral health behavior through a questionnaires survey. In addition, this study provide primary informations for developing a dental health program for diabetic patients. Materials and Methods: There were fifty patients with diabetes mellitus or glucose tolerance (controlled by a community health center at Dalsung-Gun in Daegu City and fifty nondiabetic age, gender and location matched control subjects. Data were collected by a direct oral examination and by questionnaires from 100 subjects in July, 2004. Results: The DMFT (Decay, Missing, Filling Teeth) mean values in diabetics were significantly higher than that in non-diabetics (p<0.05). The decay teeth index and Filling teeth index was similar in the two groups, but the mean Missing teeth index was significantly higher in the diabetics than in non-diabetics. The PI (Periodontal Index) mean values were significantly higher in the diabetics than in the non-diabetics (p<0.01). There was a significant difference between the diabetics and non diabetics aged in their 50s and 60s, but there was no difference with those aged in their 70s. The oral hygiene status was similar in the two groups. The average number of remaining teeth was significantly lower in the diabetics ($16.1{\pm}10.35$) than in the non-diabetics ($20.04{\pm}8.70$) (p<0.05). Conclusion: In the diabetic patients, the M component of the DMFT index was found to be higher than the controls. Diabetics lose their teeth mainly due to periodontal disease, which is supported by the increased PI mean values.