• Progress in Medical Physics
• /
• v.28 no.4
• /
• pp.156-163
• /
• 2017

To verify the usefulness of a steam sterilizer equipped with an electronic Bowie-Dick test system, this study was carried out using two methods, utilizing both a steam sterilizer and an electronic Bowie-Dick tester. The first method is to confirm the error detection of the chemical Bowie-Dick test pack and the electronic Bowie-Dick tester in a malfunctioning sterilizer environment. For this purpose, the Bowie-Dick test program for the steam sterilizer was used to test three types of test packs commonly used in hospitals and the electronic Bowie-Dick tester by changing the set values of temperature, time, and vacuum frequency. The second is an experiment to check the sterilizer's normal operation with the electronic Bowie-Dick tester and the usefulness of grasping the cause of the malfunction. The results showed that the sterilization temperature was the same as that of the test pack at a temperature $1{\sim}6^{\circ}C$ lower than the reference temperature of $134^{\circ}C$. In the test with the sterilization exposure time as a variable, there was a normal discoloration at a time difference of 30~90 s. In the experiment using the number of vacuum cycles, the test was correct by performing the normal discoloration only at the normal condition of 3 times. The test results of 30 hospitals were 100 failure tests by a total of 291 Bowie-Dick tests. Of these, the failure factors related to an internal temperature that the chemical test packs could not detect were the greatest, and the four factors related to temperature, including the internal temperature, were found to be 71.18% of total malfunctions. In addition, the Bowie-Dick tester was provided within 30 min after the start of the Bowie-Dick test to confirm the performance of the sterilizer and the detailed cause. A steam sterilizer equipped with an electronic Bowie-Dick test system is used to manage individual sterilizers. In the current steam sterilizer with many temperature-related errors, it is possible to check the malfunction of the temperature difference that the test pack cannot detect, and the cause of error for the sterilizer is immediately detected after the test. The steam sterilizer equipped with the electronic Bowie-Dick test system assists with infection control with accurate sterilizer performance assurance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.4
• /
• pp.562-568
• /
• 2017

Objective: The hull attached to the barley kernel can be mechanically removed thus reducing the fiber content of the barley. This experiment was carried out to evaluate the effects of partial dehulling on the nutrient digestibility as well as the digestible energy (DE) and metabolizable energy (ME) content of barley in pigs. Methods: Two hulled barley samples (high fiber barley [HF] and low fiber barley [LF]) with either high or low fiber contents were obtained from the Hubei and Jiangsu Provinces of China. A portion of the two barleys was mechanically dehulled (dehulled high fiber barley [DHF] and dehulled low fiber barley [DLF]). Thirty barrows (initial $BW=31.5{\pm}3.2kg$) were assigned to one of five diets in a randomized complete block design. The five diets consisted of 96.9% corn, HF, LF, DHF, or DLF supplemented with 3.1% minerals and vitamins. Each diet was fed to six barrows housed in individual metabolism crates for a 10-d acclimation period followed by a 5-day total but separate collection of feces and urine. Results: The daily loss of gross energy (GE) in feces was lower (p<0.01) for pigs fed DHF than for those fed HF. The daily N intake and fecal N loss were lowest (p<0.01) for pigs fed the corn diet. The DE and ME as well as the apparent total tract digestibility (ATTD) of dry matter, GE, organic matter, neutral detergent fiber (NDF) and acid detergent fiber (ADF) of DHF or DLF were higher (p<0.01) than the values in HF and LF, respectively while the values except the ATTD of NDF and ADF in DLF were higher (p<0.01) than the values in DHF and were comparable to corn. Conclusion: The DE and ME contents as well as the ATTD of nutrients in both DHF and DLF barley were improved compared with the HF and LF barley. Moreover, the nutritive value of DLF barley was comparable to the yellow-dent corn used in the study.

• The KIPS Transactions:PartB
• /
• v.11B no.7 s.96
• /
• pp.759-768
• /
• 2004

Recently the biometric recognition technology is intensively studied and the standardization of the technology has been highly demanded for its commercialization. Currently many blometric recognition products are being developed based on the BioAPl(Biometric Application Program-ming Interface) specification. However, the reliable testing tools (or scenarios) to evaluate performance and conformance of the products are not shown yet. In this paper, a conformance testing method is presented, which verifies a biometric recognition system to meet the requirements of the BioAPl standard. Two different testing procedures are used in the proposed method. The first procedure evaluates that each functions offered in the BioAPl specification are correctly implemented and that the functions are actually used in the system. Through the Procedure, a BSP(Biometric Service Provider) system is executed on the framework of the BioAPl functions. It requires selection of parameters and prece-dent functions that should be executed first. The second procedure evaluates the abilities of module management, handling operations and ver-ification process by the analysis of the test cases. It tests the correctness of the system operation when a testing scenario is given. The proposed testing method is applied on a fingerprint verification BSP using the sample BSP provided by the BioAPl consortium. The experimental results shows the benefits of the proposed testing method.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.589-596
• /
• 2014

This study was designed to investigate the using status and awareness of pit and fissure sealant, and how it affects on secondary caries when performed on above of initial caries. After classifying 446 occlusal surface into four groups, performed pit and fissure sealant, induced artificial caries, used DIAGNOdent (Kavo) to measure degree of secondary caries. Also, distributed a questionnaire on dental clinic in metropolitan area to find out using status and awareness of pit and fissure sealant, the following results were obtained. 1) On inspection and percussion, Group 4 corresponding to the enamel caries showed the highest secondary caries after sealant and was statistically significant difference in the order of initial group, stained group, sound group (p<0.05). 2) Inspection showed the highest percentage on tooth fissure caries diagnostic methods before sealant. 3) 56.6% didn't know about DIAGNOdent, 91.6% didn't have it. 4) In clinically, the most cause of secondary caries after sealant was a broken sealant, making caries on the downward. Based on the results of above study, degree of caries under sealant could affect on secondary caries, needs publicity about the use and necessity of objective fluorescence device.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.485-493
• /
• 2013

PURPOSE. To evaluate the effects of surface treatments on shear bond strength (SBS) between microwave and conventionally sintered zirconia core/veneers. MATERIALS AND METHODS. 96 disc shaped Noritake Alliance zirconia specimens were fabricated using YenaDent CAM unit and were divided in 2 groups with respect to microwave or conventional methods (n=48/group). Surface roughness (Ra) evaluation was made with a profilometer on randomly selected microwave (n=10) and conventionally sintered (n=10) cores. Specimens were then assessed into 4 subgroups according to surface treatments applied (n=12/group). Groups for microwave (M) and conventionally (C) sintered core specimens were as follows; $M_C$,$C_C$: untreated (control group), $M_1,C_1:Al_2O_3$ sandblasting, $M_2,C_2$:liner, $M_3,C_3:Al_2O_3$ sandblasting followed by liner. Veneer ceramic was fired on zirconia cores and specimens were thermocycled (6000 cycles between $5^{\circ}-55^{\circ}C$). All specimens were subjected to SBS test using a universal testing machine at 0.5 mm/min, failure were evaluated under an optical microscope. Data were statistically analyzed using Shapiro Wilk, Levene, Post-hoc Tukey HSD and Student's t tests, Two-Way-Variance- Analysis and One-Way-Variance-Analysis (${\alpha}$=.05). RESULTS. Conventionally sintered specimens ($1.06{\pm}0.32{\mu}m$) showed rougher surfaces compared to microwave sintered ones ($0.76{\pm}0.32{\mu}m$)(P=.046), however, no correlation was found between SBS and surface roughness (r=-0.109, P=.658). The statistical comparison of the shear bond strengths of $C_3$ and $C_1$ group (P=.015); $C_C$ and $M_C$ group (P=.004) and $C_3$ and $M_3$ group presented statistically higher (P=.005) values. While adhesive failure was not seen in any of the groups, cohesive and combined patterns were seen in all groups. CONCLUSION. Based on the results of this in-vitro study, $Al_2O_{3-}$ sandblasting followed by liner application on conventionally sintered zirconia cores may be preferred to enhance bond strength.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.2
• /
• pp.157-170
• /
• 2007

Purpose: This investigation was designed to determine the translucency and color stability of various core ceramics for all-ceramic restoration using the CIE $L^*a^*b^*$ system. Material and Methods: IPS e.max Press ceramic(Ivoclar-Vivadent, Liechtenstein), $LAVA^{TM}$ All Ceramic(3M-Espe, Germany), Cercon Smart Ceramic(Dentsply, Germany), and Z-match Ceramic(DentAim, Korea) were used for this study. For the specimens of zirconia oxide ceramics, the as-sintered cylindrical blanks($11.0{\times}25.0mm$) were machined into the shape of a disk(0.4, 0.8, 1.5 mm in thickness, 10 mm in diameters) with a diamond grind machine. The IPS e.max Press specimens ($0.8{\times}10mm$) were fabricated using the "lost wax" technique. CIE $L^*a^*b^*$ coordinates and light transmission were recorded for each specimen with a spectrophotometer(CM-2600d, Minolta, Japan). Color differences were calculated using the equation, ${\Delta}E^*ab=[({\Delta}L^*)2+({\Delta}a^*)2+({\Delta}b^*)2]1/2$. Results: The results were obtained as follows: 1. The most translucent group was IPS e.max Press ceramic that is a glass-ceramic, and $Lava^{TM}$ and Z-match ceramic were more translucent than Cercon Smart ceramic in zirconia ceramic group. 2. In the all groups, there was no significant translucent change after 6 times heat-treatments required to make a final restoration. 3. Colored zirconia was showed more yellowish and dark than uncolored zirconia. 4. After heat-pressing, IPS e.max Press ceramic was showed high ${\Delta}E^*ab$ value(4.1 of eM1, 6.8 of eM2) that means to be more whiter than before heat-pressing. However, there was no color change after additive heat treatments for final restoration. 5. In the colored zirconia groups, there was no significant color change after some heat-treatments required to make a final restoration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.333-343
• /
• 2004

Statement of problem: In its preceding work, change in surface characteristics were investigated in consideration that both microtopograpy and macroscopic configuration of implants surface are two of the most important factors, in that they can construct agreeable environment by raising surface energy, to affect osseointegration and biocompatibility explained by cell proliferation. Purpose: This study focused on examining cytocompatibility of dental implants materials Ti-Ag alloys, of which mechanical and electrochemical superiority to cp-Ti or Ti6Al4V were verified, in comparison with that of cp-Ti, and Ti6Al4V. Materials and methods: In this regard, MTT tests for L-929, the fibroblast connective tissues and cell proliferation tests for osteoprogenitor cells, MC3T3-E1 were performed on cp-Ti, Ti6Al4V, and Ti-Ag alloys following thermal oxidation according to appropriate heat treatment temperature(untreated, 400, 600, $800^{\circ}C$) and heat treatment duration(untreated, 0.5, 1, 4 hr). Results: The MTT tests on fibroblasts L-929 resulted in cell viability of over 90% in all experimental group entities, where, especially, the 100% of the viability for Ti-Ag alloys specimens accounted for the slightest adverse effect of ions release from those alloys on the cell. In MC3T3-E1 proliferation tests, the population of cells in the experimental group was roughly increased as experimentation proceeded, after two to four days. Proliferation showed highest viability for most of specimens, including Ti2.0Ag, treated at $600^{\circ}C$. Conclusion: In conclusion, it is the heat treatment temperature, not the duration that has considerable effects on thermal oxidation of specimens. Ti-Ag alloys treated at $600^{\circ}C$ proved to have the best surface morphology as well as cytocompatibility when compared with Ti or Ti6Al4V for short-term biocompatibility tests.

• Journal of dental hygiene science
• /
• v.7 no.2
• /
• pp.97-100
• /
• 2007

In this study, to find the influencing factors of the cooperation affects the result of the orthodontic treatment, the questionnaires were collected from patients who were being treated with fixed orthodontic appliances at A dental clinic in Seoul area. The results of this study are below.1. The average of the total score of the cooperation was 8.04 with the range of between 2 and 14. 2. The gender and age of the patient did not show the meaningful significance in aspect of the cooperation. 3. The relation between the period of treatment time and the cooperation, the analysis showed that the longer the period of treatment, the lesser the cooperation (P < 0.05). 4. The average of the cooperation by decision maker, the patient himself was 9.17, mother was 7.69 and father was 7.77. This result showed that the treatment decision made by the patient himself, the cooperation was highest (P < 0.05). 5. In the relationship between the malocclusion classification and the cooperation, the Angle Class I was 8.77, Class II was 7.28, and Class III was 6.89. This result showed that the average cooperation of Angle Class I patients was higher than Angle Class III patients (P < 0.05). 6. All the influencing factors to the orthodontic treatment were analyzed by logistic regression analysis (RGA). The result showed that there is meaningful significance in the treatment period and malocclusion classification. The most influencing factor was treatment period and the longer the period, the lesser cooperation (P < 0.05).

• Journal of Nutrition and Health
• /
• v.19 no.4
• /
• pp.246-254
• /
• 1986

Weanling female Sprague Dawley rats were fed d diets containing 22mg pyridoxine. BCI/kg diet (control diet) and l.2mg pyridoxine. BCI/kg diet (deficient diet). One control group and one defi­c dent group were fed their diet throughout growth, g gestation and lactation. After the pups were born and weaned, the deficient group was divided into two groups. One switched to control diet(supple­I mented group) and the other continued the same d deficient diet( deficient group) until 10 week -old. The liver mitochondrial and cytosolic asparate a aminotransferase activity and pyridoxal phosphate content were determined in offspring rats. The aspartate aminotransferase activities in both liver mito$\phi$ondrial and cytosolic fractions of den­d cient group were significantly lower than those of controls, but there were no significant differences between two groups after addition of 1O^{-4}M pyri­d do뼈I phosphate to the medium. By pyridoxine s supplementation after weaning, the reduced aspar­a tate aminotnmsferase activities were only partialy I restored to control levels. The pyridoxal phospha­t te content of deficient group in Iiver mitochondr­ial and cytosoIic fractions were alo significantly different from those of controls, but readily restored by dietary supplementation. These results suggest that there is a quantitative and a qualitative changes of aspartate amino trans­f ferase and pyridoxal phosphate in liver mitochon­d drial and cytosolic fraction by long-term pyrido­x xine deficiency and these reductions can partially recovered by dietary pyridoxine supplementation after weaning.

• The Korean Society of Law and Medicine
• /
• v.8 no.1
• /
• pp.61-105
• /
• 2007

The Hospitalized Acquired Infection is defined as the case where the hidden infection or not found at the time of hospitalization occurs during the hospitalized period or, within 30 days to those who performed the surgery operation and then left the hospital. About 2/3 of the Hospitalized Acquired Infection are found as having the internal infection cases that are occurred by the patients' own virus due to the lowered immune system, while about 1/3 are found as having the external infection. The latter 1/3 of the external infection cases can be prevented through the infection management. And in case the new Hospitalized Acquired Infection case occur to the patient who was treated in the hospital, its responsibility issue will matter. As well in the disputes over the Hospitalized Acquired Infection cases, the cause-result relation between the damages and the medical staff's fault and as to whether there is failure of the medical staff or not. personnel should be proved in the medical-malpractice cases. In addition, the difficulties in proving such as expertise, secrecy propensity, discrete propensity and incompleteness will be considered to ease the burden of patient side's proving. Probability theory, Fact based assumption theory, Most adequate plaintiff preassumption or Expressed evidence theories are being discussed as the theories of eased burden of proof. In the result of gathering and reviewing Korea's precedent cases concerning the Hospitalized Acquired Infection, there are only a few accumulated prece dent cases and the attitude of the court also are also not consistent. Therefore, there are the precedents where the cause-result relation and the failure are immediately assumed when (1) timely proximity between the medical behavior and malpractice results, (2) proximity between the medical behavior-applied parts and the malpractice results-found parts, and (3) lack of other causes are separately evidenced; while the are the precedents only when 'the existence of the medical faults based on the common sense' is separately evidenced. It was found that the former and latter cases coexisted. The former is considered as based on the theory that separates the fault and cause-result relation not to consider them together, or regarded as based on the doubts that assumes the medical staff's neglect even though the Hospitalized Acquired Infection might be completely prevented by their efforts. However, the modern medical technology has the limitation as far as the prevention of the Hospitalized Acquired Infection. In conclusion, the assumption of the cause-result relation and that of the fault should be separately reviewed. Therefore, the latter precedents are considered as more reasonable, in the point the faulty behavior may be proved based on the common sense.