• 한국초전도ㆍ저온공학회논문지
• /
• 제15권1호
• /
• pp.1-5
• /
• 2013

We transformed the shape of a YBCO sample with striation to reduce hysteresis and ac losses. And we chose several points to analyze in detail and visualized superconducting properties like critical transition temperature, distribution of the magnetic field, distribution of the current density and hysteresis in a non-destructive manner based on Low Temperature Scanning Laser Hall Probe Microscopy (LTSLHPM) to examine the homogeneity of the sample.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1041-1044
• /
• 2001

This study was performed to evaluate the effect of non-uniform corrosion distribution on the analysis of concrete cover failure. A series of experiments have been undertaken to measure the corrosion rate of reinforcement according to the concentration of chloride ion so as to suggest a relationship between the reinforcement corrosion rate and chloride ion density. The corrosion induced pressure depending on the density of chloride ion has been derived. And nonlinear analysis assuming nonlinear corrosion distribution for cover cracking was achieved and compared with other experimental results to verify the accuracy of the model. Analysis was also performed for various parameters to compare their effects.

• Journal of the Korean Data and Information Science Society
• /
• 제23권1호
• /
• pp.219-225
• /
• 2012

We derive approximate maximum likelihood estimators of two parameters in a weighted exponential distribution, and derive the density function for the ratio Y=(X+Y) of two independent weighted exponential random variables X and Y, and then observe the skewness of the ratio density.

• 한국화재소방학회논문지
• /
• 제11권3호
• /
• pp.15-23
• /
• 1997

In this study, the alumina for gas sensor was prepared by anodic oxidation. It was stable thermally and chemically, and pore diameter and pore distribution was uniform. And the shape of pore was cylinderical. The aluminum plate was carried out by the thermal oxidation, chemical polishing and electropolishing pretreatment. The pore diameter, pore size distribution, pore density and thickness of alumina was observed with the change of reaction temperature, electrolyte concentration and current density. As a results, It was able to use for carrier because alumina which was prepared by anodic oxidationhas uniform pore size distribution.

• 지질공학
• /
• 제25권2호
• /
• pp.281-290
• /
• 2015

남한 지역에서 수행된 검층밀도 자료를 수집하고 코어밀도 자료와 비교 분석하였다. 먼저 코어밀도와 검층밀도 자료의 비교로부터 검층밀도가 비이상적으로 낮은 현상이 얻어졌으며 이는 소선원 검층밀도 자료에서의 비이상적으로 낮은 밀도와 연관되어 있음이 밝혀졌다. 표준선원과 소선원 자료간의 큰 밀도 차이를 비롯하여 표준선원 검층밀도와 코어밀도 간의 상관성 비교에서 나타난 분포곡선의 형태, 평균값, 표준편차 등 모든 결과들이 소선원 밀도자료의 품질에 이상이 있음을 보였다. 소선원 밀도자료에서의 품질 이상은 검층밀도 결정에서 소선원 밀도검층기가 지니는 선원 특성과 연결되었으며 결론적으로 지금까지의 소선원 밀도자료는 정확성을 유지하기 위한 최소의 조건이 충족되지 못한 상태에서 얻어진 것으로 판단하였다. 끝으로 코어자료와 표준선원 자료를 사용하여 남한지역 주요 지층의 밀도 분포 특성이 결정되었다.

• 한국연초학회지
• /
• 제16권1호
• /
• pp.34-42
• /
• 1994

Experiments on the variability of plant type and factors representing the productivity and quality of the cultivars were subsequently carried out in relation to different plant density. Results are summarized as below. The higher was the plant density, the greater was the plant height and mean leaf inclination(MLI). As the plant density increased, the horizontal leaf area distribution became greater in proximal to the stem in NTN 77 and Br.49 but evenly in distal part in Br.21. Meanwhile, in terms of vertical leaf area distribution, it was decreased much more in middle and lower leaves than in upper in NTN 77 and Br.49 although it steadily decreased in any part of the plant in Br.21. Br.49 was the largest but Br.21 and NTN 77 were similar with respect to both CGR and NAR. The yield was greater in larger MLI cultivars(NTN 77>Br.49>Br.21). These three characteristics became greater when the tobacco were planted more densely in the field. Dry leaf weight and dry matter weight per plant were heavier in the larger MLI and increased with lower plant density. Total nitrogen content was greater in lower plant density and larger MLI cultivar. The plant density increases filling power seems to be enhanced regardless to the plant type. There was no discernible tendency on combustibility according to the plant density or plant type.

• Structural Engineering and Mechanics
• /
• 제86권3호
• /
• pp.349-359
• /
• 2023

This paper presents a technique for determining the optimal number of elements in stochastic finite element analysis based on reliability analysis. Using the change-of-variable perturbation stochastic finite element approach, the probability density function of the dynamic responses of stochastic structures is explicitly determined. This method combines the perturbation stochastic finite element method with the change-of-variable technique into a united model. To further examine the relationships between the random fields, discretization of the random field parameters, such as the variance function and the scale of fluctuation, is also performed. Accordingly, the reliability index is calculated based on the explicit probability density function of responses with Gaussian or non-Gaussian random fields in any number of elements corresponding to the random field discretization. The numerical examples illustrate the effectiveness of the proposed method for a one-dimensional cantilever reinforced concrete column and a two-dimensional steel plate shear wall. The benefit of this method is that the probability density function of responses can be obtained explicitly without the use simulation techniques. Any type of random variable with any statistical distribution can be incorporated into the calculations, regardless of the restrictions imposed by the type of statistical distribution of random variables. Consequently, this method can be utilized as a suitable guideline for the efficient implementation of stochastic finite element analysis of structures, regardless of the statistical distribution of random variables.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.113-120
• /
• 2004

Grouting works in fractured rocks have been performed to reinforce the underground and/or to block ground water flow at the foundation site of dam, bridge and so on. For the efficient grouting design, a prior knowledge of the fracture pattern of underground area to be grouted in very important. For the practical use, aperture sizes of open fractures that will be filled up with grouting materials will be kind of valuable information. Thus, the main purpose of this study is to develop a new technique (so called "GenFT") enable to form a three dimensional image of fracture aperture density distribution from Televiewer data. For this, the study is to focus on dealing with (1) estimating aperture size of each fracture automatically from Televiewer time image, (2) mapping extension of fracture planes on a given section, (3) evaluating aperture density distribution on the section by using both aperture size and fracture face mapping result of each fracture, (4) developing an algorithm that can transfer the previous results to any arbitrary(vertical and/or horizontal) section around the borehole. Since 3D imaging means "a strategy used to form an image of arbitrarily subdivided 2D sections with aperture density distribution", it will help avoid ambiguities of fracture pattern interpretation and hence will be of practical use not only for the design and assessment of grouting works but also for various engineering works. Examples of fields experiments are illustrated. It would seem that this technique might lead to reflecting future trend in underground survey.

• Ocean Science Journal
• /
• 제41권3호
• /
• pp.139-148
• /
• 2006

The distribution of the taxonomical composition and the density of meiobenthos depending on the sediment type has been studied in bottom sediments of Nha Trang Bay. The maximal population density and the taxonomical diversity were observed in the silted coarse and heterogeneous sand ($1031.4{\pm}419.7\;ind.\;10\;cm^{-2}$), whereas the minimal level of density and diversity ($588.1{\pm}152.5\;ind.\;10cm^{-2}$) was in the coarse and heterogeneous sand with shell debris and corals. The correlation between the median diameter of sediment particles and population density of meiobenthos has been revealed (r=0.82, p<0.05). In bottom sediments of Nha Trang Bay, twenty six taxonomic groups of meiobenthos were observed. Nematodes dominated in all sediment types. Representatives of four orders, twenty eight families and ninety seven genera of marine nematodes were identified. The vertical distribution of meiobenthos in different sediment types was considered. A sediment column (10 cm height) was sectioned by five 2 cm portions. In the last layer (8-10 cm) the most number of meiobenthic groups was found in sandy sediments. In the lower layers of silt sediments, only nematodes were found.

• The Korean Journal of Ecology
• /
• 제19권5호
• /
• pp.393-402
• /
• 1996

Density fluctuations of soil microarthropods at the Piagol, Mt. Chiri was assessed on the basis of 113, 096 individuals collected from March 1993 to February 1994. Of 6 classes, and 18 orders, the Arachnida and Insecta were the most numerous members with abundance of 51.4% and 46.3%, respectively. The mean density of the Acari was $13, 310/m^2$ of microarthropods. The Acari were abundant in autumn and less found in winter and the density fluctuation of the Collembola followed a similar trend. The vertical distribution of the mesofauna revealed from the soil samples taken from the surface to 5 and from 5 to 10 cm in depths was as follows. In 5~10 cm layer. Collembola was numerous with abundance of 54.7%, followed by 40.1% fo Acari and the soil microarthropods reached the highest density peak in spring, while the lowest in winter. Populations concentrated in the 0~5 cm layer as much as 62.2% throughtout the season and 82.4% throughtout the altitudes. The Acari / Collembola (A/C) ratio in the 0~5 cm layer was higher than that in the 5~10 cm.