• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제18권1호
• /
• pp.79-86
• /
• 2011

Suppose that (M,g) is a complete and noncompact Riemannian mani-fold with Ricci curvature bounded below by $-K{\leq}0$ and (N, $\bar{g}$) is a complete Riemannian manifold with nonpositive sectional curvature. Let u : $M{\times}[0,{\infty}){\rightarrow}N$ be the solution of a heat equation for harmonic map with a bounded image. We estimate the energy density of u.

• 한국환경과학회지
• /
• 제18권8호
• /
• pp.885-897
• /
• 2009

In order to make sure the impact of spatial resolution of wind energy map on the estimation of wind power density in the Korean Peninsula, the comparison studies on the characteristics of wind energy map with three different spatial resolutions were carried out. Numerical model used in the establishment of wind map is MM5 (5th generation Mesoscale Model) with RBAPS (Regional Data Assimilation and Prediction System) as initial and boundary data. Analyzed Period are four months (March, August, October, and December), which are representative of four seasons. Since high spatial resolution of wind map make the undulation of topography be clear, wind pattern in high resolution wind map is correspond well with topography pattern and maximum value of wind speed is also increase. Indication of island and mountains in wind energy map depends on the its spatial resolution, so wind patterns in Heuksan island and Jiri mountains are clearly different in high and low resolutions. And area averaged power density can be changed by estimation method of wind speed for unit area in the numerical model and by treatment of air density. Therefore the studiable resolution for the topography should be evaluated and set before the estimation of wind resources in the Korean Peninsula.

• 천문학회보
• /
• 제43권1호
• /
• pp.60.2-60.2
• /
• 2018

We present the near infrared JHK photometric properties and the spatial distribution of red supergiants(RSGs) of NGC 3623, NGC 3627 and NGC 3628 in the Leo Triplet system using the data obtained with 3.8m UKIRT(United Kingdom Infra-Red Telescope) at Hawaii. We checked interaction between the three galaxies by making a spatial density map of RSGs. From (J-K,K)0 Color-Magnitude Diagram which include resolved stars in three galaxy and control field with PARSEC isochrone, we figured out the RSG candidates of the Leo triplet are at 0.9<(J-K)0<1.2, mK<17.5 and separated them from background and foreground sources. Using gaussian kernel density estimation, we drew spatial density map of RSGs in the Leo triplet with an assumption that all RSGs are an identical population. The density map shows extended features of NGC 3628 to NGC 3627 along the declination direction. The asymmetries between NGC 3627 and NGC 3628 might be evidence for that the distribution of actual star components(RSGs) follows the neutral hydrogen distribution and also for interaction between two galaxies. And the extended features along the right ascension direction might be a supporting evidence for the existence of a TDG(Tidal Dwarf Galaxy). In case of NGC 3623, we could not see any sign of interaction in density map.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.97-99
• /
• 2003

Lineament density maps can be used for the quantitative evaluation of relationship between lineaments and groundwater occurrence. There are several kinds of lineament density maps including lineament length density, lineament cross-points density, and lineament counts density maps. This paper reports the usefulness of the representative elementary area (REA) concept for lineament analysis. This concept refers to the area size of the unit circle to calculate the lineament density factors distributed within the circle: length, counts and cross-points counts. The circle is a unit circle that calculates the sum of the lineament length, lineament counts and the number of cross-points within it. The REA is needed to obtain the best representative lineament density map prior to the analysis of relation between lineaments and groundwater well yield or other groundwater characteristics. A basic lineament map for the Yongsangang-Seomjingang watershed of Korea, drawn from aerial black-and-white photographs of 1/20, 000 scale was used for demonstrating the concept. From this study, the conclusions were as follows: (1) the REA concept can be efficiently applied to the lineament density analysis and mapping, (2) for whole Yongsangang-Seomjingang watershed which has 6, 502 lineaments with an average lineament length of 3.3 km, the lower limits of each REA used for drawing the three density maps were about 1.77 $\textrm{km}^2$ (r=750 m) for lineament length density, 7.07 $\textrm{km}^2$ (r=1, 500 m) for lineament counts density, and 4.91 $\textrm{km}^2$ (r=1, 250 m) for lineament cross-points density, respectively, (3) the lineament densities are inversely proportional to the size of REA, and the REA can be calculated with this inversely linear regression model, (4) if the average lineament density values for the whole study area are known, the most accurate density maps can be drawn using the REAs obtained from each linear regression model, and (5) but critical attention should be paid to draw lineament counts density and lineament cross-points density maps because.

• Spatial Information Research
• /
• 제6권1호
• /
• pp.65-76
• /
• 1998

대기오염을 관리하기 위해서는 대기오염 농도와 함께 대기오염 배출량의 공간분포가 정확히 산정되어야 한다. 기존의 대기오염 분포도에서는 토지이용 분류도의 해상도(rdsolution)가 낮아 같은 위치에서 오염원별 토지이용이 중복되었기 때문에 배출량의 정확한 공간분포를 산정할 수 없었다. 본 연구에서는 토지이용분류도를 고해상도(28.5m x 28.5m)로 작성하므로써 이것이 배출량의 공간분포 산정과 대기오염농도의 추정에 미치는 영향을 파악하였는데, 결과를 요약하면 다음과 같다. GIS를 이용하여 비교적 고해상도(28.5m x 28.5m)의 토지이용 분류도를 작성하므로써 점 및 선 오염원이 면 오염원과 동일한 지점에서 중보되지 않도록 토지이용을 효율적으로 반영할 수 있었다. 서울지역에 대해 기존으 방법으로 작성된 배출량 분포도와 본 연구에서 작성된 배출량 분포도를 이용하여 대기오염 농도를 추정(TCM-2모형을 이용)한 결과 본 연구에서 작성한 배출량 분포도에 의한 대기오염 농도의 추정지가 자동측정망의 실측치에 근접함을 알 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.159-162
• /
• 2003

The remeshing algorithm using the constrained Delaunay method adapted to the mesh density map is developed. In the finite element simulation of forging process, the numerical error increases as the process goes on. However, it is not desirable to use a uniformly fine mesh in the whole domain. Therefore, it is necessary to reduce the analysis error by constructing locally fine mesh at the region where the error is concentrated such as die corner. In this paper, the point insertion algorithm is used and mesh size is controlled by using a mesh density map constructed with a posteriori error estimation. And an optimized smoothing technique is adapted to have smooth distribution and improve the quality of the mesh.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.607-610
• /
• 2005

A remeshing algorithm using tetrahedral elements has been developed, which is adapted to the mesh density map constructed by a posteriori error estimation. In the finite element analyses of metal forging processes, numerical error increases as deformation proceeds due to severe distortion of elements. In order to reduce the numerical error, the desired mesh sizes in each region of the workpiece are calculated by a posteriori error estimation and the density map is constructed. Piecewise density functions are then constructed with the radial basis function in order to interpolate the discrete data of the density map. The sample mesh is constructed based on the point insertion technique which is adapted to the density function and the mesh size is controlled by moving and deleting nodes to obtain optimal distribution according to the mesh density function and the quality optimization function as well. After finishing the redistribution process of nodes, a tetrahedral mesh is constructed with the redistributed nodes, which is adapted to the density map and resulting in good mesh quality. A goodness and adaptability of the constructed mesh is verified with a testing measure. The proposed remeshing technique is applied to the finite element analyses of forging processes.

• 한국통신학회논문지
• /
• 제38A권8호
• /
• pp.629-637
• /
• 2013

혼돈(Chaos) 통신 방식은 비주기성, 광대역성, 신호의 비예측성, 구현의 용이성 등의 특성을 가지고 있다. 이런 특성으로 인해 혼돈 신호를 사용하는 디지털 통신 방식에 대한 연구가 지속적으로 이루어지고 있다. 하지만 혼돈 통신 방식은 보안성이 우수하며 도청의 낮은 확률과 같은 장점을 가지고 있지만 다른 방식에 비해서 비트오류율(Bit Error Rate, BER) 성능이 안 좋다는 단점을 가진다. 기존의 혼돈 통신 방식 사용자는 여러 가지 혼돈 지도의 비트오류율 성능을 평가하고 비트오류율 성능이 좋은 혼돈 지도를 선택적으로 적용할 뿐 혼돈 지도의 확률밀도함수(Probability Density Function, PDF) 특성을 변화시킴으로써 비트오류율 성능을 개선시키려는 시도는 이루어지지 않고 있다. 본 논문에서는 혼돈 신호를 확률밀도함수로 나타내고 초기조건, 매개변수 및 방정식을 변화시키면서 확률밀도함수의 변화를 측정한다. 상관지연편이변조 방식에서는 확률밀도함수가 변하면 혼돈 지도의 특성(혼돈 신호)이 변하고 이에 따라 비트오류율 성능도 변하게 된다. 따라서 비트오류율 성능을 좋게 하는 혼돈 신호의 확률밀도 함수 경향을 알아보고 이 결과를 토대로 비트오류율 성능이 우수한 새로운 혼돈 지도를 제안한다.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.48-53
• /
• 2012

In previous study, it showed that the MAP was greatly effective polishing process for magnesium plate. But it had lower efficiency than magnetic materials such as SM45C. It was very difficult to cut non-magnetic materials using the MAP process because the process was fundamentally possible by help of a magnetic force. This study aimed to verify analytically formation of the magnetic field in a case of the non-magnetic materials especially focused on magnesium plate. So, In this study, the magnetic density flux was predicted using simulation program. As a result, the magnetic density flux was lower at the center of pole on inductor than outside. It had same result on the experimental verification. And magnetic force was lower according to increase of working gap. So, to improve the magnetic force, permanent magnet was installed under the workpiece. In that case, the magnetic density flux not only at center but also at outside of pole was increased. Therefore, the efficiency of magnetic abrasive polishing was also increased. A design of experimental method was adopted for assessment of parameters' effect on the MAP results of magnesium plate for improving the magnetic force.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.45-50
• /
• 2008

In previous study, it showed that the MAP was greatly effective polishing process for magnesium plate. But it had lower efficiency than magnetic materials such as SM45C. It was very difficult to cut non-magnetic materials using the MAP process because the process was fundamentally possible by help of a magnetic force. This study aimed to verify analytically formation of the magnetic field in a case of the non-magnetic materials especially focused on magnesium plate. So, In this study, the magnetic density flux was predicted using simulation program. As a result, the magnetic density flux was lower at the center of pole on inductor than outside. It had same result on the experimental verification. And magnetic force was lower according to increase of working gap. So, to improve the magnetic force, permanent magnet was installed under the workpiece. In that case, the magnetic density flux not only at center but also at outside of pole was increased. Therefore, the efficiency of magnetic abrasive polishing was also increased. A design of experimental method was adopted for assessment of parameters' effect on the MAP results of magnesium plate for improving the magnetic force.