• 전기의세계
• /
• v.22 no.5
• /
• pp.19-32
• /
• 1973

This paper treats with some of plasma jet behaviors under magnetic field for the purpose of controlling important characteristics of plasma jet in the practices of material manufacturings. Under the existence and non-existence of magnetic field, the pressure distribution, flame length, stability and noise of plasma jet are comparatively evaluated in respect of such parameters as are current, gap of electrode, quantity of argon flow, magnetic flux density, diameter and length of nozzle. The results are as follows: 1) the pressure, the length and the noise of plasma jet rise gradually with the increase of are current, and have high values under identical arc current as the diameter of nozzle increases, but reverse phenomenon tends to appear in the noise. 2) The pressure, the flame length and the noise increase with the increased quantity of argon flow, and the rising slope of noise is particularly steep. Under magnetic field, the quantity of argon flow in respect of flame length has the critical value of 80(cfh). 3) The pressure and length of flame decrease with small gradient value as the length of gap increases, but the noise tends to grow according to the increase of nozzle diameter. 4) The pressure and the length of jet flame decrease inversly with the increase of magnetic flux density, which have one critical value in the 100 amps of arc current and two values in 50 amps. The pressure of jet flame can be below atomospher pressure in strong magnetic field. 5) "The constriction length of nozzle has respectively the critical value of 6(mm) for pressure and 23(mm) for the length of flame. 6) Fluctuations in the wave form of voltage become greater with the increase of argon flow and magnetic flux density, but tends to decrease as arc current increases, having the frequency range of 3-8KHz. The wave form of noise changes almost in parallel with that of voltage and its changing value increases with argon flow, arc current and magnetic flux density, having the freuqency range of 6-8KHz. The fluctuation of jet presurre is reduced with the increase of argon flow and magnetic flux density and grows with arc current.rent.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.2
• /
• pp.121-135
• /
• 2014

Object-based classification methods provide a valid alternative to traditional pixel-based methods. This study reports the results of an object-based classification to examine land cover in the demilitarized zones(DMZs) of Inje-gun. We used land cover classes(7 classes for main category and 13 classes for sub-category) selected from the criteria by Korea Ministry of Environment. The average and standard deviation of the spectrum values, and homogeneity of GLCM were chosen to map land cover types in an hierarchical approach using the nearest neighborhood method. We then identified the distributional characteristics of land cover by considering 3 topographic characteristics (altitude, slope gradient, distance from the Southern Limited Line(SLL)) within the DMZs. The results showed that scale 72, shape 0.2, color 0.8, compactness 0.5 and smoothness 0.5 were the optimum weight values while scale, shape and color were most influenced parameters in image segmentation. The forests (92%) were main land cover type in the DMZs; the grassland(5%), the urban area (2%) and the forests (broadleaf forest: 44%, mixed forest: 42%, coniferous forest: 6%) also occupied mostly in land cover classes for sub-category. The results also showed that facilities and roads had higher density within 2 km from the SLL, while paddy, field and bare land were distributed largely outside 6 km from the SLL. In addition, there was apparent distinction in land cover by topographic characteristics. The forest had higher density at above altitude 600m and above slope gradient $30^{\circ}$ while agriculture, bare land and grass land were distributed mainly at below altitude 600m and below slope gradient $30^{\circ}$.

• Korean Journal of Animal Reproduction
• /
• v.17 no.2
• /
• pp.103-111
• /
• 1993

These experiments were undertaken to establish the optimal culture systems for in vitro maturation, fertilization and subsequently embryonic development of porcine immature follicular oocytes isolated from the ovary of slaughtered pigs. Porcine ovaries were brought to the laboratory from local slaughter house within 1 hour after slaughtering and cumulus oocytes complexes were recovered from antral follicles (3~5mm) with 23 gauge needle. To maturate follicular oocytes, cumulus oocytes complexes were washed three times with TCM-199 containing 25mM HEPES and incubated (39$^{\circ}C$, 5% CO2 in air) for 42hrs. Ejaculated and liquid storaged boar spermatozoa capacitated with different sperm capacitation methods and media were prepared forfertilizaing of matured follicular oocytes in vitro. Fertilization was performed by adding 5~10${mu}ell$ of capacitated spermatozoa containing 1~5$\times$105 sperm/ml to droplets. Eighteen to twenty-eight hours after sperm insemination, fertilized eggs were washed three times with culture media and transferred to the culture media. The fertilization rates of in vitro matured follicular oocytes cultured in B. O., TCM-HEPES, m-KRB, and TALP-II media were 61.3%, 83.0%, 88.9% and 89.2%, respectively. In addition, the polyspermy rates were 60.7%, 66.5%, 53.8%, and 43.9%, respectively. These data indicated that the highest of fertilization and the lowest of polyspermy rate was shown in TALP-II medium. Spermatozoa capacitated by caffeine, heparin, and percoll density gradient treatment in the 4 different media, the fertilization rates were 33.0~57.2%, 39.9~90.2%, and 52.6~92.8%, respectively, showing the lowest rate in caffeine treatment. The development rate of follicular oocytes, fertilized with the spermatozoa capacitated by caffeine, heparin, and percoll gradient in the TALP-II medium, upto 2 to 4-cell stages were 32.6%, 74.5% and 70.9%, respectively. Finally, fertilization rates of follicular oocytes cultured with follicular fluid containing medium from 10 to 100% were 61.2~94.1% and the rates (90~94%) with 10~20% follicular fluids were significantly higher than those (85.3%) of cultured in the media without follicular fluid. In addition, the rates of pronucleus formation were also higher in follicular fluid treated group (73.1~83.0%) than those (64.7%) of oocytes cultured without follicular fluid. The highest fertilization and pronucleus formation rates was found in oocytes cultured with 10% follicular fluid. These results suggest that the addition of heparin or percoll density gradient method is better capacitation method. Furthermore, the addition of porcine follicular fluid to the fertilization medium may improve the fertilization rates and formation of pronucleus.

• Journal of Korea Water Resources Association
• /
• v.46 no.5
• /
• pp.559-568
• /
• 2013

Surface compaction significantly impacts runoff and soil erosion under rainfall since it leads to changes of soil physical characteristics such as increase of bulk density and shear stress, change of microporosity, and decrease of hydraulic conductivity. This study addressed surface compaction effects on runoff and soil loss from bare and disturbed soils that are commonly distributed on construction sites. Thirty-six rainfall simulations from three replicates of each involving rainfall intensities (68.5 mm/hr, 95.6 mm/hr) and plot gradients ($5^{\circ}$, $12.5^{\circ}$, $20^{\circ}$) were conducted to measure runoff and soil loss for two different soil surface treatments (compacted surface, non-compacted surface). Compacted surface increased significantly soil bulk density and soil strength. However, the effect of surface treatments on runoff changed with rainfall intensity and plot gradient. Rainfall intensity and plot gradient had a positive effect on mean soil loss. In addition, the effect of surface treatments on soil loss responded differently with rainfall intensity and plot gradient. Compacted surfaces increased soil loss at gentle slope ($5^{\circ}$) while they decreased soil loss at steep slope ($20^{\circ}$). These results indicate that there exists transitional slope range ($10{\sim}15^{\circ}$) between gentle and steep slope by surface compaction effects on soil loss under disturbed bare soils and simulated rainfalls.

• Journal of Korean Society of Forest Science
• /
• v.105 no.1
• /
• pp.115-121
• /
• 2016

This study was conducted to provide the basic policy information for establishing efficient forest-road networks. Synthetic forest-road networks that consist of main and spur roads and forest-road networks with only main road (hereafter called "main-road network") were planned for the five forest-road experimental districts of Korea Forest Service in this study. Road density of the synthetic forest-road networks was calculated and compared with the road density of the main-road networks. The results showed that the optimum road density of the synthetic forest-road networks was 10.1~15.9 m/ha, and the road density of the main-road networks was 8.4~12.4 m/ha. The construction cost of the synthetic forest-road networks was estimated about 1~8% lower than the main-road networks, while the road density was 20~30% greater than the main-road networks. As timber volume and hauling cost increased, the optimum road density of the synthetic forest-road networks increased, within which the road density of highstandard main road rapidly increased. On the other hand, the spur road density increased with slope gradient.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.5
• /
• pp.347-352
• /
• 2017

Reverse electrodialysis (RED), which generates electrical energy from the difference in concentration of two solutions, has been actively studied owing to its high potential and the increased interest in renewable energy resulting from the Paris Agreement on climate change. For RED commercialization, its power density needs to be maximized, and therefore various methods have been discussed. In this paper, the power density was measured using various flow shapes based on the aspect ratio, opening ratio, and number of distribution channels. We found that the power density is enhanced with a decrease in the aspect ratio and an increase in the opening ratio and number of distribution channels.

• Journal of Embryo Transfer
• /
• v.15 no.3
• /
• pp.271-277
• /
• 2000

This study was conducted to establish the optimal culture conditions for in vitro production of bovine embryos derived from slaughter house ovaries. Cumulus-oocyte- complexes (COCs) collected by aspiration from follicles of 2~7 mm in diameter were matured in Ham's F-10 medium supplemented with 0.01 $\mu\textrm{g}$/m1 epidermal growth factor (EGF) at 39$^{\circ}C$ in a humidified atmosphere of 5% $CO_2$in air. After 24 hrs of culture, the oocytes were co-cultured with epididymal sperm selected off by Percoll-density gradient in TALP medium for 24 hrs. The presumptive zygotes were cultured in HECM-6 medium for 3 d post-insemination, and followed by cultured in TCM199 medium until 7 to 10d post-insemination. The cultures were compared of their cleavage and development into later stage in culture medium by additions of different protein sources (PVA, BSA and BCS) and by different embryo density. The rates of cleavage and development rates into blastocyst were not significantly (P<0.05) different among the culture media containing with BSA (75.0% and 40.5%), BCS (76.7% and 38.0%) and PVA (72.5% and 42.2%), respectively. Significantly (P<0.05) higher blastocysts rates were obtained in culturing of 30 and 40 embryos in each 50$\mu$l droplets of culture medium than in 5, 10 and 20 embryos. These results indicate that the optimal density of embryos is 30~40 embryos in a 50$\mu$l droplet of culture medium. Furthermore there is no effect of different protein sources on early embryonic development.

• Korean Journal of Metals and Materials
• /
• v.49 no.11
• /
• pp.845-852
• /
• 2011

The Spark Plasma Sintering(SPS) method offers a means of fabricating a sintered-body having high density without grain growth through short sintering time and a one-step process. A titanium compact having high density and purity was fabricated by the SPS process. It can be used to fabricate a Ti sputtering target with controlled parameters such as sintering temperature, heating rate, and pressure to establish the optimized processing conditions. The compact/target(?) has a diameter of ${\Phi}150{\times}6.35mm$. The density, purity, phase transformation, and microstructure of the Ti compact were analyzed by Archimedes, ICP, XRD and FE-SEM. A Ti thin-film fabricated on a $Si/SiO_2$ substrate by a sputtering device (SRN-100) was analyzed by XRD, TEM, and SIMS. Density and grain size were up to 99% and below $40{\mu}m$, respectively. The specific resistivity of the optimized Ti target was $8.63{\times}10^{-6}{\Omega}{\cdot}cm$.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1373-1380
• /
• 2019

Besides promising implications as fertile nuclear materials, thorium carbonitrides are of great interest owing to their peculiar physical and chemical properties, such as high density, high melting point, good thermal conductivity. This paper reports first-principles simulation results on the structural, electronic and magnetic properties of cubic thorium carbonitrides $ThC_xN_{(1-x)}$ (X = 0.03125, 0.0625, 0.09375, 0.125, 0.15625) employing formalism of density-functional-theory. For the simulation of physical properties, we incorporated full-potential linearized augmented plane-wave (FPLAPW) method while the exchange-correlation potential terms in Kohn-Sham Equation (KSE) are treated within Generalized-Gradient-Approximation (GGA) in conjunction with Perdew-Bruke-Ernzerhof (PBE) correction. The structural parameters were calculated by fitting total energy into the Murnaghan's equation of state. The lattice constants, bulk moduli, total energy, electronic band structure and spin magnetic moments of the compounds show dependence on the C/N concentration ratio. The electronic and magnetic properties have revealed non-magnetic but metallic character of the compounds. The main contribution to density of states at the Fermi level stems from the comparable spectral intensity of Th (6d+5f) and (C+N) 2p states. In comparison with spin magnetic moments of ThSb and ThBi calculated earlier with LDA+U approach, we observed an enhancement in the spin magnetic moments after carbon-doping into ThN monopnictide.

• Journal of Embryo Transfer
• /
• v.15 no.1
• /
• pp.67-75
• /
• 2000

This study was conducted to establish the optimal conditions for in vitro embryo production using oocytes derived from follicles of slaughter-house ovaries. The ovaries of Hanwoo were obtained from a local slaughter-house. The oocytes were aspirated from visible follicles of 2~7mm in diameter. The recovered oocytes which were completely surrounded by at least 2 layers of cumulus cells and a homogeneous cytoplasmic pigmentation were used. The selected oocytes were washed 3 or 4 times with D-PBS containing 10% bovine calf serum (BCS) and matured in vitor (IVM) in Ham's F-10 supplemented with 10% BCS or 0.01 $\mu\textrm{g}$/ml epidermal growth factor(EGF) at 39$^{\circ}C$ under 5% CO2 in air for 24 hours. They were fertilizqed in vitro (IVF) with fresh sperm separated by Percoll density gradient or swim-up in TALP media. The zygotes were cultrued with or without bovine oviductal epitherial cells(BOEC) in media(HECM-6 supplemented with 11 amino acid and / or TCM-199 supplemented with 10% BCS) for 7 to 10 days. The results obtained were as follow: The cleavage rate and developmental rate to blastocyst after maturation and IVF were not significantly different between Ham's F-10 with EGF(76.0% vs. 44.0%) and BCS(75.9% vs. 43.6%)(P<0.05). The cleavage rate and development rate to blastocyst after fertilizing by swim-up or Percoll method were not signifciantly(P<0.05) different between swim-up (80.2% vs. 29.2%) and Percoll(81.9% vs. 26.5%) (P<0.05). The cleavage rate in TCM 199(80.5) was signficiantly higher than that in HECM-6 (72.0%) (P<0.05). However, developmental rate to blastocyst using TCM 199 following HECM-6 for 3 or 4 days (42.2%) was significantly higher than that in TCM-199 alone(26.7%)(P<0.05). The cleavage rate and development rate of embryos produced in vitro by exchange timing for HECM-6 media were not significantly different between in day 3(78.6% vs. 45.5%) and day 4(75.0% vs. 43.2%)(P<0.05). The cleavage rate and developmental rate to blastocysts according to co-culture system were not significantly different between with (74.2% vs. 41.4%) and without BOEC(73.95 vs. 43.5%) (P<0.05). The number of blastomere in blastocyst stage after co-culture with or without BOEC was not significantly different (106.7$\pm$5.1 and 96.6$\pm$4.0). In conclusion, the most transferable IVP embryos could be produced from Ham's F-10 medium for IVM, Percoll density gradient method for IVF sperm separation and in vitro culture in HECM-6 until day 3 or day 4, and then transferred into TCM-199 until day 9 within adequate embryo density in culture droplets after insemination.