• Asian-Australasian Journal of Animal Sciences
• /
• 제12권5호
• /
• pp.702-707
• /
• 1999

A percoll density gradient technique was developed for producing high quality turkey semen and improving the fertility by removing deleterious cellular components, including spermiophages, bacteria, abnormal or dead spermatozoa, and other cellular debris. The combination of three different percoll densities, 1.05, 1.07, and 1.08 showed the best resolution and was selected to prepare a discontinuous percoll density gradient to obtain healthy spermatozoa from semen smples. Bacteria, spermiophages, and abnormal or dead spermatozoa were detected from the density range from 1.05, 1.05 to 1.07, and 1.07 to 1.08, respectively. Healthy spermatozoa were collected from the density greater than 1.08. Spermatozoa obtained from percoll density gradient centrifugation showed better sperm motility than those from unprocessed pooled semen. Bacteria including Escherichia coli, Staphylococcus aureus, and Proteus spp., were predominant contaminants in turkey semen, and the numbers of cells were approximately $5{\times}10^5$ to $1{\times}10^9cfu/ml$. The overall fertility rates in hens inseminated with processed percoll density gradient were higher than those in hens with unprocessed semen especially for unhealthy sperm. In conclusion, semen quality can be improved by percoll density gradient centrifugation, which augmented the fertility of turkey breeders.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.26.3-27
• /
• 2011

Formation of a steep plasma density gradient in the middle-latitude ionosphere during geomagnetic storms and the latitudinal migration of its location depending on the storm phase are suggested to be associated with the ionospheric signature of the plasmapause. We test this idea by using the satellite and ground observation data during the 11 April 2001 storm. The locations of the steep plasma density gradient identified by TOPEX/Poseidon (2001 LT) and DMSP (1800 and 2130 LT) satellites coincide with the ionospheric footprints of the plasmapause identified by the IMAGE satellite. This observation may support the dependence of the middle-latitude plasma density gradient location on the plasmapause motion, but does not explain why the steep density gradient whose morphology is largely different from the morphology of the middle-latitude ionization trough during quiet period is formed in association with the plasmapause. The ionospheric disturbances in the total electron content (TEC) maps shows that the steep TEC gradient is formed at the boundary of the positive ionospheric storm in low-middle latitudes and the negative ionospheric storm in middle-high latitudes. We interpret that the thermospheric neutral composition disturbance in the dayside is confined within the middle-high latitude ionospheric convection zone. The neutral composition latitudes and, therefore, the locations of the steep plasma density gradient coincide with the footprints of the plasmapause. The TEC maps show that the appearance of the steep plasma density gradient in the pre-midnight sector during the recovery phase is related to the co-rotation of the gradient that is created during the main phase.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.197-205
• /
• 2007

We have proposed a novel line detection method based on the estimated probability density function of gradient directions of edges. By estimating peaks of the density function, we determine groups of edges that have the same gradient direction. For edges in the same groups, we detect lines that correspond to peaks of the connectivity weighted distribution of the distances from the origin. In the experiments using the Data Matrix barcode images and LCD images, the proposed method showed better performance than conventional Methods in terms of the processing speed and accuracy.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.42-47
• /
• 2009

The propagation of an intense laser pulse through an upward density-gradient plasma in a self-modulated laser wakefield acceleration (SM-LWFA) is investigated by using particle-in-cell (PIC) simulations. In the fully relativistic and kinetic PIC simulations, the relativistic and kinetic effects including Landau damping enhance the electron dephasing. This electron dephasing is the most important factor for limiting the energy of accelerated electrons. However, the electron dephasing, which is enhanced by relativistic and kinetic effects in the homogeneous plasma, can be forestalled through the detuning process arising from the longitudinal density gradient. Simulation results show that the detuning process can effectively maintain the coherence of the laser wake wave in the spatiotemporal wakefield pattern, hence considerable energy enhancement is achievable. The spatiotemporal profiles are analyzed for the detailed study on the relativistic and kinetic effects. In this paper, the optimum slope of the density gradient for increasing electron energy is presented for various laser intensities.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.454-456
• /
• 2017

다양한 양자모델(Quantum model)을 적용한 터널 전계 효과 트랜지스터(tunnel field effect transistor; TFET)의 전류 및 커패시턴스(Capacitance)-전압 특성을 조사하였다. 사용된 양자 모델은 density gradient, Bohm Quantum Potential(BQP), Vandort quantum correction 모델을 슈뢰딩거-푸아송 모델과 calibration하여 사용하였다. BQP, Vandort, density gradient 모두 구동전류는 감소하였다. BQP를 단독으로 사용한 경우에 SS(subthreshold swing)와 on-set 전압($V_{onset}$)은 일정하지만 구동전류에서만 약 3배 전류가 감소하였으며, BQP와 Vandort 사용한 경우와 density gradient를 사용한 경우에 모두 $V_{onset}$이 약 0.07 eV 이동하였으며, SS가 40 mV/dec 이상으로 증가하였다.

• 한국가축번식학회지
• /
• 제12권3호
• /
• pp.141-147
• /
• 1988

These experiments were carried out to develop new techniques for in vitro separation of x-and Y-bearing spermatozoa. The results obtained in these experiments were summarized as follows: 1. Following centrifugation of discontinuous percoll density gradient, populatin of spermatozoa increased progressively from low to high density. The highest concentration of spermatozoa was observed at the 4th fraction which included 36.6% of spermatozoa. 2. As increasing percoll concentration, the higher motility index was obtained and the highest motility index(74.2) was obtained at the 5th fraction. 3. The percentage of B-body bearing spermatozoa following percoll density gradient centrifugation was decreased from 39.7% to 25.6%. 4. The sperm population following chromatography by sephadex gel and percoll density gradient centrifugation was decreased in 1st, 5th and 6th fractions but the reverse was turn for 2nd, 3rd and 7th fractions, and the highest sperm concentration was observed at the 7th fraction which included 37.4% of spermatozoa. 5. Motility index of spermatozoa was increased from 77.6 to 79.4 after the sephadex gel filtration, however it was decreased at all fractions after percoll density gradient centrifugation. The lowest motility index(33.2) was obtained from the 7th fraction. 6. The rate of B-body bearing spermatozoa was shown the trend to decrease by the sephadex gel filtration and the trend was accelerated by the percoll density gradient centrifugation. The lowest percentage of B-body bearing spermatozoa, 12.0% was obtained from the 5th fraction.

• Smart Structures and Systems
• /
• 제3권2호
• /
• pp.173-188
• /
• 2007

The general solution for two-dimensional magneto-electro-elastic media in terms of four harmonic displacement functions is proposed analytically. The expressions of specific solutions of magneto-electro-elastic plane problems with specific body forces are derived. Finally, based on the general solution in the case of distinct eigenvalues and the specific solution for density functionally gradient media, two kinds of beam problems with body forces depending only on the z or x coordinate are solved by the trial-and-error method.

• 한국진공학회지
• /
• 제8권2호
• /
• pp.172-179
• /
• 1999

The axial distributions of plasma density in a helical resonator plasma with the external magnetic field have been measured using Langmuir probes. Net RF power is set to 200W and chamber pressure is varied from 0.4 mTorr to 100mTorr there are three kinds of eternal magnetic field structure applied on the helical resonator plasma. One is a uniform magnetic field, the second is a positive gradient magnetic field and the third is a negative gradient magnetic field. In the three magnetic field structures, the negative gradient magnetic field is found to show the highest increase in plasma density on the substrate compared with other magnetic structures. Plasma density profile in helical resonator is well consistent with electromagnetic field pattern obtained by computer simulation. It is also found that axial magnetic fields do not affect plasma density distribution in the plasma reactor region, but induce the increase of plasma density in the process chamber region. In order to avoid the nonuniformity of radial density profile, weak magnetic fields under 100G are applied.

• 한국염색가공학회지
• /
• 제6권2호
• /
• pp.17-23
• /
• 1994

Carboxylic acid group gradient surface where the density of carboxylic acid groups changes gradually along the sample length was prepared. Carboxylic acid group gradient surface was produced by the treatment of low density polyethylene sheet using a corona with gradually increasing power, followed by the grad polymerization of acrylic acid. The prepared gradient surface was characterized by the measurement of water contact angle, Fourier-transform infrared spectroscopy in the attenuated total reflectance mode, and electron spectroscopy for chemical analysis.

• 자원환경지질
• /
• 제27권5호
• /
• pp.479-489
• /
• 1994

In this paper, the iterative least-squares inversion method is used to determine shapes and density contrasts of 2-D structures from the gravity data. The 2-D structures are represented by their cross-sections of N-sided polygons with density contrasts which are constant or varying with depth. Gravity data are calculated by theoretical formulas for the above structure models. The data are considered as observed ones and used for inversions. The inversions are performed by the following processes: I) polygon's vertices and density contrast are initially assumed, 2) gravity are calculated for the assumed model and error between the true (observed) and calculated gravity are determined, 3) new vertices and density contrast are determined from the error by using the damped least-squares inversion method, and 4) final model is determined when the error is very small. Results of this study show that the shape and density contrast of each model are accurately determined when the density contrast is constant or vertical density gradient is known. In case where the density gradient is unknown, the inversion gives incorrect results. But the shape and density gradient of the model are determined when the surface density contrast is known.