• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.738-739
• /
• 2006

This paper will describe a powder and processing method that facilitates single press-single sintered densities approaching $7.5g/cm^3$. At this sintered density, mechanical properties of the powder metal (P/M) component are significantly improved over current P/M technologies and begin to approach the performance of wrought steels. High performance gears have the added requirement of rolling contact fatigue durability that is dependent upon localized density and thermal processing. Combining high density processing of engineered P/M materials with selective surface densification enables powder metal components to achieve rolling contact fatigue durability and mechanical property performance that satisfy the performance requirements of many high strength automotive transmission gears. Data will be presented that document P/M part performance in comparison to conventional wrought steel grades.

• Geomechanics and Engineering
• /
• 제17권2호
• /
• pp.145-156
• /
• 2019

Since behaviors of loose, dense, silty sands vary under seismic loading, understanding the liquefaction mechanism of sandy soils continues to be an important challenges of geotechnical earthquake engineering. In this study, 36 deformation controlled cyclic simple shear tests were performed and the liquefaction potential of the sands was investigated using three different relative densities (40, 55, 70%), four different effective stresses (25, 50, 100, 150 kPa) and three different shear strain amplitudes (2, 3.5, 5%) by using energy based approach. Experiments revealed the relationship between per unit volume dissipated energy with effective stress, relative density and shear strain. The dissipate energy per unit volume was much less affected by shear strain than effective stress and relative density. In other words, the dissipated energy is strongly dependent on relative density and effective stress. These results show that the dissipated energy per unit volume is very useful and may contain the non-uniform loading conditions of the earthquake spectrum. When multiple regression analysis is performed on experiment results, a relationship is proposed that gives liquefaction energy of sandy soils depending on relative density and effective stress parameters.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제2권2호
• /
• pp.139-148
• /
• 1998

The charge densities of humic acid and humic extract have been determined by back titration using spectrophotometry as the method of end point detection and several cationic polymers of different charge density(copolymers of acylamide and dimethylaminoethylacrylate and polydiallyidimethylammonium chloride, PDDA), and a cationic indicator o-toluidine blue(o-Tb). The charge densities of humic acid and humic extract obtained depend on the charge densities of cationic polymers used. When the polymers of lower charge density are used, lower apparent charge density values are obtained, but for polymers of high charge density(above 2.5 meq/g), the measured values are almost identical, but also are nearly the same as that obtained for PDDA which has a high charge density(about 6 meq/g). For polymers of lower charge density, it is considered that the optimum dosage does not correspond to 1 :1 charge neutralization between anionic and cationic groups. Polymers of high charge density should be used in order to achieve a complete charge neutralization. As humic acid and humic extract are dissociable acids, their ionization is heavily pH dependent and so higher charge density values are obtaines with increasing pH.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2016년도 임시총회 및 하계학술연구발표회
• /
• pp.66-66
• /
• 2016

• 한국패류학회지
• /
• 제24권2호
• /
• pp.137-142
• /
• 2008

본 연구를 위하여 득량만 키조개, Atrina pectinata의 양성밀도별 성장과 생존율을 조사하였다. 실험기간 중 이식해역의 수질환경을 살펴보면 수온은 $14.5-28.0^{\circ}C$였으며, 염분농도는 27.98-31.89 psu로 나타났다. 수소이온농도(pH)는 7.78-8.35 범위였으며, 용존산소는(DO) 7.07-7.90 mg/L, 화학적 산소요구량(COD)은 1.20-1.70 mg/L로 나타났다. 용존 무기질소(DIN)는 2.88-6.02 mg/L였으며, 인산염인($PO_4-P$) 0.06-2.09 mg/L, Chlorophyll-a는 0.20-0.79 mg/L, 부유입자물질(SPM) 은 10.8-21.4 mg/L의 범위로 나타났다. 저질 환경을 살펴보면 총강열감량(IL)은 4.0-4.6%, 저질COD는 7.28-10.76 mg/L, 황화물(AVS)은 0.03-0.05 mg/L의 범위를 나타냈다. 밀도에 따른 키조개의 성장을 살펴보면, 저밀도의 시험구에서 높은 성장률을 보였다. 각고의 일간성장률은 5 indiv./$m^2$ 시험구가 0.27%이었고, 10 indiv./$m^2$는 0.26%, 35 indiv./$m^2$ 시험구는 0.21%이었다. 전중량의 일간성장률은 5 indiv./$m^2$ 시험구가 0.33%이었고, 10 indiv./$m^2$는 0.29%, 35 indiv./$m^2$ 시험구는 0.20%이었다. 생존율은 5 indiv./$m^2$와 10 indiv./$m^2$ 시험구에서 높은 생존율을 나타냈다.

• 대한기계학회논문집B
• /
• 제36권4호
• /
• pp.391-395
• /
• 2012

본 논문에서는 서로 다른 밀도의 유체 내 바이오 물질이 받는 중력과 부력 차를 이용한 연속적 세포 분리기를 제안하였다. 종래의 크기별 세포분리는 서로 다른 크기의 동일한 밀도를 가지는 세포를 분리하는데 한계가 있다. 반면, 본 논문에서 제안하는 세포 분리기는 미소유로 상하부에 밀도가 다른 다층 유체층 내에서 세포가 받는 중력과 부력 차이로 크기는 다르지만 동일한 밀도를 가지는 세포를 효율적으로 분리할 수 있다. 밀도가 다른 유체층(PBS, 밀도=1.0g/ml, Ficoll, 밀도=1.1g/ml) 내에서 전혈로부터 백혈구(직경=$6-10{\mu}m$, 밀도=1.06~1.1g/ml), 적혈구(직경=$4-6{\mu}m$, 밀도=1.09~1.2g/ml)를 밀도에 따라 분리한 효율이 각각 $90.9{\pm}9.1%$와 $86.4{\pm}1.99%$로 측정되었다 따라서, 본 세포 분리기는 크기 편차가 있는 동일 밀도의 세포를 크기에 둔감하고 밀도에만 민감한 분리가 가능하다.

• 한국전자파학회논문지
• /
• 제25권8호
• /
• pp.857-863
• /
• 2014

전자기파와 플라즈마의 상호 작용을 결정하는 주요 변수는 플라즈마 주파수와 충돌 주파수이며, 이 둘은 각각 전자 밀도와 전자 온도로부터 계산할 수 있다. 이 두 값은 플라즈마 발생기 종류에 따라 결정되는 시간 의존적인 변수이다. 기존의 전파 흡수 특성 연구에서는 수치 해석적 모형의 부재로 인하여 플라즈마의 시간적/공간적 변화를 간략화하거나, 상수로 가정하여 수행하였다. 본 연구에서는 플라즈마 유체 모델을 도입하여 얻어진 시간 의존적 변수 값을 전자기파감쇠량 계산에 이용함으로써 해석의 정확도를 높이는 방식을 제안하였다. 해석 대상인 유전체 장벽 방전 플라즈마는 구조적인 단순함으로 인하여 1차원 분석만으로 플라즈마 분포의 시간적 변화를 반영할 수 있다. 본 논문은 한 주기 내에서 전자 밀도와 전자 온도를 추출하여 마이크로파 입사 시 시간적 흡수 특성 변화를 분석하였다. 또한, 전자 밀도와 전자 온도의 변화에 따라 감쇠량을 계산하여 감쇠 경향성을 분석하였다.

• 한국표면공학회지
• /
• 제47권5호
• /
• pp.227-232
• /
• 2014

In this study, we propose the application of doping process technology for atmospheric pressure plasma. The plasma treatment means the wafer is warmed via resistance heating from current paths. These paths are induced by the surface charge density in the presence of illuminating Argon atmospheric plasmas. Furthermore, it is investigated on the high-concentration doping to a selective partial region in P type solar cell wafer. It is identified that diffusion of impurities is related to the wafer temperature. For the fixed plasma treatment time, plasma currents were set with 40, 70, 120 mA. For the processing time, IR(Infra-Red) images are analyzed via a camera dependent on the temperature of the P type wafer. Phosphorus concentrations are also analyzed through SIMS profiles from doped wafer. According to the analysis for doping process, as applied plasma currents increase, so the doping depth becomes deeper. As the junction depth is deeper, so the surface resistance is to be lowered. In addition, the surface charge density has a tendency inversely proportional to the initial phosphorus concentration. Overall, when the plasma current increases, then it becomes higher temperatures in wafer. It is shown that the diffusion of the impurity is critically dependent on the temperature of wafers.

• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.495-508
• /
• 2005

We investigated both classical and quantum properties of a damped harmonic oscillator with a time-variable elastic coefficient using invariant operator method. We acquired the energy eigenvalues, uncertainties and probability densities for several types of wave packet. The probability density corresponding to the displaced minimum wave packet expressed in terms of the time-dependent Gaussian function. The displaced minimum wave packet not only be attenuated but also oscillates about x = 0. We confirmed that there exist correspondence between quantum and classical behaviors for the time-dependent damped harmonic oscillator.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1994년도 봄 학술발표회 논문집
• /
• pp.181-188
• /
• 1994

Generally, the structural material shows rate dependent behaviors, which require to constitute different strain-stress relations according to strain rates. Conventional rate- independent constitutive equations used in general purpose finite analysis programs are inadequate for dynamic finite strain problems. In this paper, a rate dependent constitutive equation for elastic-plastic material was developed. The plastic stretch rate was modeled based on slip model with dislocation velocity and density so that there is no yielding condition, and no loading conditions. Non-linear hardening rule was also introduced for finite strain. Material constants of present constitutive equation were determined by experimental data of mild steel. The constitutive equation was applied to uniaxile tension. It was appeared that the present constitutive equation well simulates rate dependent behaviors of mild steel.