• Korean Journal of Remote Sensing
• /
• v.38 no.2
• /
• pp.189-198
• /
• 2022

In this present study, we investigated the effect of the offset correction factor calculation method on the sulfur dioxide (SO₂) column density in the SO₂ retrieval algorithm of the Geostationary Environment Monitoring Spectrometer (GEMS) launched in February 2020. The GEMS operational SO₂ retrieval algorithm is the Differential Optical Absorption Spectroscopy (DOAS) - Principal Component Analysis (PCA) Hybrid algorithm. In the GEMS Hybrid algorithm, the offset correction process is essential to correct the absorption effect of ozone appearing in the SO₂ slant column density (SCD) obtained after spectral fitting using DOAS. Since the SO₂ column density may depend on the conditions for calculating the offset correction factor, it is necessary to apply an appropriate offset correction value. In this present study, the offset correction values were calculated for days with many cloud pixels and few cloud pixels, respectively. And a comparison of the SO₂ column density retrieved by applying each offset correction factor to the GEMS operational SO₂ retrieval algorithm was performed. When the offset correction value was calculated using radiance data of GEMS on a day with many cloud pixels was used, the standard deviation of the SO₂ column density around India and the Korean Peninsula, which are the edges of the GEMS observation area, was 1.27 DU, and 0.58 DU, respectively. And around Hong Kong, where there were many cloud pixels, the SO₂ standard deviation was 0.77 DU. On the other hand, when the offset correction value calculated using the GEMS data on the day with few cloud pixels was used, the standard deviation of the SO₂ column density slightly decreased around India (0.72 DU), Korean Peninsula (0.38 DU), and Hong Kong (0.44 DU). We found that the SO₂ retrieval was relatively stable compared to the SO₂ retrieval case using the offset correction value on the day with many cloud pixels. Accordingly, to minimize the uncertainty of the GEMS SO₂ retrieval algorithm and to obtain a stable retrieval, it is necessary to calculate the offset correction factor under appropriate conditions.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.65-74
• /
• 2018

The degree of compaction of embankments is generally measured using the sand replacement method or a soil density gauge. However, these methods include coarse particles, which are relatively large. The degree of compaction is overestimated if the in-situ soil density is simply compared with the density obtained from a Proctor compaction test (KS F 2312, 2001), because the density of coarse particles is higher than that of soil. However, there is no recommended correction for the coarse particle ratio in Korea, thus intentionally increasing the degree of compaction for structures to which large loads are applied or for which compaction is critical. Here, a correction considering the Korean Proctor compaction test and the difference between the maximum allowable particle sizes was recommended after corrections for coarse particle ratios in other countries were collected and analyzed. The degree of compaction was re-estimated by applying the recommended correction to the results of both Proctor compaction and sand replacement tests. The degree of compaction without the correction of coarse particle ratio was overestimated, because the re-estimated degree of compaction decreased as the coarse particle ratio increased. The relatively accurate results obtained from the field application of the correction will offer long-term cost savings due to reduced maintenance fees during operation.

• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.226-235
• /
• 2000

Two representative finite volume methods, i.e., the time marching method and the pressure correction method, were applied to 8 centrifugal compressor impeller flows, with low to very high level of pressure ratio, among which 7 impellers' experimental performance is given in the open literature. The present study is focused on the prediction differences from both methods, developed by the authors, in the pressure correction method's point of view. In all cases, the time marching method gives a satifactory solution, but the pressure correction method does not. Up to about $18\%$ less level of total-to-total pressure ratio is predicted by the pressure correction method as the level of the impeller pressure ratio increases up to about 10. The drop of total pressure ratio is caused by the underestimation of static pressure rise which seems to be attributed to inappropriate linearization and discretization of the pressure/density coupling terms in the pressure correction equation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1559-1562
• /
• 2022

As electronic devices technology scales down into the deep-submicron to achieve high-density, low power and high performance integrated circuits, multiple bit upsets by soft errors have become a major threat to on-chip memory systems. To address the soft error problem, single error correction, double error detection and double adjacent error correction (SEC-DED-DAEC) codes have been recently proposed. But these codes do not troubleshoot mis-correction problem. We propose the SEC-DED_DAEC code with without mis-correction. The decoder for proposed code is implemented as hardware and verified. The results show that there is no mis-correction in the proposed codes and the decoder can be employed on-chip memory system.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.1
• /
• pp.57-66
• /
• 2011

Purpose : A new inhomogeneity correction method based on two-point Dixon sequence is proposed to obtain water and fat images at 0.35T, low field magnetic resonance imaging (MRI) system. Materials and Methods : Joint phase-magnitude density function (JPMF) is obtained from the in-phase and out-of-phase images by the two-point Dixon method. The range of the water signal is adjusted from the JPMF, and 3D inhomogeneity map is obtained from the phase of corresponding water volume. The 3D inhomogeneity map is used to correct the inhomogeneity field iteratively. Results : The proposed water-fat imaging method was successfully applied to various organs. The proposed 3D inhomogeneity correction algorithm provides good performances in overall multi-slice images. Conclusion : The proposed water-fat separation method using JPMF is robust to field inhomogeneity. Three dimensional inhomogeneity map and the iterative inhomogeneity correction algorithm improve water and fat imaging substantially.

• Computers and Concrete
• /
• v.21 no.6
• /
• pp.741-748
• /
• 2018

In this paper, the sensitivity of a plastic-damage-based structural damage index on mesh density is studied. Multiple finite element meshes with increasing density are used to investigate their effect on the damage index values calculated from nonlinear finite element simulations for a reinforced concrete column subjected to cyclic loading. With the simulation results, this paper suggests a correction method for the objective damage index based on nonlinear regression of volumetric tensile damage ratio data. The modified damage index values are presented in the quasi-static cyclic simulation to show the efficacy of the suggested correction method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.2
• /
• pp.485-499
• /
• 2021

Although non-binary low-density parity-check (NB-LDPC) codes have better error-correction capability than that of binary LDPC codes, their decoding complexity is significantly higher. Therefore, it is crucial to reduce the decoding complexity of NB-LDPC while maintaining their error-correction capability to adopt them for various applications. The extended min-sum (EMS) algorithm is widely used for decoding NB-LDPC codes, and it reduces the complexity of check node (CN) operations via message truncation. Herein, we propose a low-cost CN processing method to reduce the complexity of CN operations, which take most of the decoding time. Unlike existing studies on low complexity CN operations, the proposed method employs quick selection algorithm, thereby reducing the hardware complexity and CN operation time. The experimental results show that the proposed selection-based CN operation is more than three times faster and achieves better error-correction performance than the conventional EMS algorithm.

• Economic and Environmental Geology
• /
• v.29 no.4
• /
• pp.429-437
• /
• 1996

The purpose of this study is to correct the nodule abundance of FFG (Free Fall Grab) sampler on KODOS (Korea Deep Ocean Study) area in North-East Pacific Ocean. The image analysis of sea-floor photography was carried out for correcting the abundance of nodules, and the image enhancement techniques and edge detection method were used to discriminate between nodules and sediments. The trace of nodules on sediments was detected to reduce the fractionation effect in calculating the coverage of nodules. The three methods, using the coverage of nodules, using the volume density, and using corrected volume density, were utilized for the correction of the nodule abundance. The method using the coverage of nodules was more convenient and available for the correction of nodule abundance than the other two methods. The method using the corrected volume density had the highest confidence level compared with the other methods.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.137-144
• /
• 2008

The stand-off errors due to the different separations between the sonde and the borehole wall were measured and analyzed in 4 physical borehole models located in Kangwon National University having different densities with cylindrical and half cylindrical PVC and/or acrylic casings. The analysis of the stand-off error data based on the "spine and ribs" technique suggests a well defined rib line for each model irrespectively of the types and thicknesses of the casing, and that the gradients of the ribs are proportional to the densities of the models. By using these characteristics successful density correction could be made for the plastic casings in NX sized boreholes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.847-850
• /
• 1987

In this paper a new method to correct the differential non-linearity(D NL) error for a successive approximation is proposed. The DNL of ADC is very important characteristic in the field of radiation pulse height analysis or measurement of probability density function. The results of computer simulations are shown to demonstrate the feasibility of the proposed correction method.