• Progress in Medical Physics
• /
• v.16 no.2
• /
• pp.82-88
• /
• 2005

In this study, the physical compensator made with the high density material, Cerrobend, and the electronic compensator realized by the movement of a dynamic multileaf collimator were analyzed in order to verify the properness of a design function in the commercial RTP (radiation treatment planning) system, Eclipse. The CT images of a phantom composed of the regions of five different thickness were acquired and the proper compensator which can make homogeneous dose distribution at the reference depth was designed in the RTP. The frame for the casting of Cerrobend compensator was made with a computerized automatic styrofoam cutting device and the Millennium MLC-120 was used for the electronic compensator. All the dose values and isodose distributions were measured with a radiographic EDR2 film. The deviation of a dose distribution was $\pm0.99 cGy\;and\;\pm1.82cGy$ in each case of a Cerrobend compensator and a electronic compensator compared with a $\pm13.93 cGy$ deviation in an open beam condition. Which showed the proper function of the designed compensators in the view point of a homogeneous dose distribution. When the absolute dose value was analyzed, the Cerrobend compensator showed a $+3.83\%$ error and the electronic compensator showed a $-4.37\%$ error in comparison with a dose value which was calculated in the RTP. These errors can be admtted as an reasonable results that approve the accuracy of the compensator design in the RTP considering the error in the process of the manufacturing of the Cerrobend compensator and the limitation of a film in the absolute dosimetry.

• Journal of Periodontal and Implant Science
• /
• v.29 no.4
• /
• pp.873-893
• /
• 1999

The ultimate goal of periodontal therapy is the regeneration of periodontal tissue and repair of function. For more than a decade there have been many efforts to develop materials and bioactive molecule(such as growth factor and differentiation factors) to promote periodontal wound healing. Among the bioactive molecules, bone morphogenetic protein(BMP) was studied for periodontal wound healing. Since Urist demonstrated that demineralized bone matrix could induce the formation of cartilage and bone in ectopic site, many studies on BMP have been reported. Among those BMPs, it was reported that rhBMP-2 enhanced the healing of bone defects in animal studies and clinical studies. However, its efficacy in periodontal regeneration, especially 1-wall intrabony defects is still unknown. The purpose of this study was to examine the effect of rhBMP-2/ACS on the epithelial migration, gingival connective tissue adhesion, cementum formation, alveolar bone regeneration in intrabony defects of dogs. Four millimeter deep and four millimeter wide 1-wall defects were surgically created in the mesial aspects of the 3rd incisors. The test group received rhBMP-2/ACS with a flap procedure and the control underwent buffer/ACS with a flap procedure. Histologic analysis after 8 weeks of healing revealed the following results: 1. The length of epithelial growth(the distance from alveolar crest to the apical end of JE) was $0.9{\pm}1.5mm$ in the control group and $1.2{\pm}1.4mm$ in the test group. There was no statistically significant difference between the two groups. 2. The length of connective tissue adhesion was $2.4{\pm}1.3mm$ in the control group and $1.2{\pm}1.1mm$ in the test group. The control group showed significantly enhanced adhesion(P<0.05). 3. The length of new cementum was $0.9{\pm}1.0mm$ in the control group and $1.7{\pm}0.8mm$ in the test group. The test group showed significantly enhanced cementum regeneration(P<0.05). 4. The length of new bone height was $1.9{\pm}0.6mm$ in the control group and $2.4{\pm}0.9mm$ in the test group. There was no statistically significant difference between the two groups. 5. The new bone area was $4.7{\pm}1.7mm^2$ in the control group and $8.0{\pm}2.0mm^2$ in the test group. The test group showed significantly enhanced bone formed area(P<0.05). 6. The new bone density was $73.0{\pm}8.6%$ in the control group and $66.6{\pm}15.3%$ in the test group. There was no statistically significant difference between the two groups. These results suggest that the use of rhBMP-2 in 1-wall intrabony defects has significant effect on new cementum and new bone formation area, but doesn't have any significant effect on the prevention of junctional epithelium migration and new bone formation height.

• Investigative Magnetic Resonance Imaging
• /
• v.18 no.3
• /
• pp.225-231
• /
• 2014

Purpose : The biceps femoris tendon (BFT) and lateral collateral ligament (LCL) in the knee were formerly known to form a conjoined tendon at the fibular attachment site. However, the BFT and LCL are attached into the fibular head in various patterns. We classified insertion patterns of the BFT and LCL using MR imaging, and analyzed whether the LCL attaches to the fibular head or not. Materials and Methods: A total of 494 consecutive knee MRIs of 470 patients taken between July 2012 and December 2012 were retrospectively reviewed. There were 224 males and 246 females, and patient age varied from 10 to 88 (mean, 48.6). The exclusion criteria were previous surgery and poor image quality. Using 3T fat-suppressed proton density-weighted axial images, the fibular insertion patterns of the BFT and LCL were classified into following types: type I (the LCL passes between the anterior arm and direct arm of the BFT's long head), type II (the LCL joins with anterior arm of the long head of the BFT), type III (the BFT and LCL join to form a conjoined tendon), type IV (the LCL passes laterally around the anterior margin of the BFT), and type V (the LCL passes posteriorly to the direct arm of the BFT's long head). Results: Among the 494 cases of the knee MRI, there were 433 (87.65%) type I cases, 21 (4.25%) type II cases, 2 (0.4%) type III cases, 16 (3.23%) type IV cases, and 22 (4.45%) type V cases. There were 26 cases (5.26%) in which the LCL and BFT were not attached into the fibular head. Conclusion: The fibular attachment pattern of the BFT and LCL shows diverse types in MR imaging. The LCL does not adhere to the head in some patients.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of the Korean association of regional geographers
• /
• v.23 no.2
• /
• pp.403-419
• /
• 2017

This study analyzed the forces to drive the change of urban green spaces in Daegu from 1989 to 2009. First, the loss and fragmentation of green spaces in the past 20 years were spatially identified by performing the hot spots analysis for the cell-based spatial metrics quantifying the size and diversity of green spaces. Next, seven drivers such as slope, distance to roads, land price, population density, ratios of residential, commercial, and industrial areas were selected based on the previous studies and the direction of the association between the loss and fragmentation of green spaces and seven drivers was analyzed with the stepwise logistic regression. Finally, the relative importance of the seven drivers and their interactions in the past 20 years were analyzed with the geographical detector. The results show that the loss of green spaces was concentrated on a part of the Anshim housing development district from 1989 to 2009 and green spaces were highly fragmented around the housing development districts such as Seongseo, Anshim, Dalseong-gun and Chilgok. The forces to drive the loss and fragmentation of green spaces in these areas were different at the administrative levels, but the drivers such as slope and ratios of residential and industrial areas were commonly significant. These drivers were positively correlated with largest patch index(LPI) quantifying the loss of green spaces while they were negatively correlated with Shannon's diversity index(SHDI) measuring the fragmentation of green spaces. In other words, the loss and fragmentation of urban green spaces in Daegu appeared around such regions with lower slope and lower ratios of residential and industrial areas. The relative importance of drivers for LPI was listed as ratio of industrial area, land price, and ratio of commercial area in descending order whereas that of drivers for SHDI was listed as ratio of industrial area, land price, and distance to roads in descending order. Also, the interaction between slope and ratio of residential area had a great impact on LPI and SHDI. The ratio of industrial area was a single driver to most significantly explain the loss and fragmentation of urban green spaces in Daegu in the past 20 years. The interaction between slope and ratio of residential area was greater than the independent influence of a single driver. This study will provide the base data to build a sustainable urban green policy for the city of Daegu in the near future.

• Korean Journal of Environmental Agriculture
• /
• v.2 no.1
• /
• pp.45-54
• /
• 1983

This experiment was carried out to investigate effects of dense planting on the growth and productivity in varieties of hot pepper at open field. Three varieties (Joseng jinheung, Weonkyo No. 304 and Bulam house Putgochu) were sowed on Jan. 30th and transplanted on May 12th. The planting densities used were 3,300, 5,500 and 8,300 plants per 10a. The results obtained are as follows: 1) With higher plant density, the plant shape was changed from open-type to upright-type and the yield was increased, presumably due to the increase of leaf area index. 2) LAI and SLA per unit area were increased by denser planting. Wonkyo No. 304 presented the highest LAI and the lowest SLA. 3) Dry matter weight per unit area was also increased, however the LW/SW ratio was tended to decrease on denser planting. 4) Through crop growth analysis, it was determined that CGR and NAR were increased during the early growth stages and became decreased from last June. 5) Light intensity under the canopy formed by denser planting was decreased by 40% measured at 60 ㎝ above the soil surface. The vertical distribution of fruits became concentrated the upper part of plant. Fruit yield per unit area in denser planting was increased as compared to the conventional planting. The number of fruit setting decreased. 6) Generally, no differences in yield were detected in comparison between denser planting and conventional planting harvested on Aug. 30th and Oct. 15th, respectively. But Weonkyo No. 304 increased yield by 18% in denser planting.

• Clinical and Experimental Pediatrics
• /
• v.51 no.12
• /
• pp.1300-1309
• /
• 2008

Purpose :This study aimed to estimate age- and gender-specific cut points for metabolic syndrome (MS) components, including body mass index (BMI), blood pressure (BP), triglycerides, high-density lipoprotein (HDL) cholesterol, and glucose. Methods :Data from the 1998, 2001, and 2005 Korean NHANES (National Health and Nutrition Examination Survey) were analyzed (n=4164; 2,139 boys and 2,025 girls, aged 10-19 years). Height, weight, waist circumference (WC), BP, triglycerides, HDL cholesterol, and fasting glucose were measured. Results :BMI over $25kg/m^2$ represents the $85^{th}P$ (percentile) in 17-year-old boys and the $90^{th}P$ in 17-year-old girls. A level of WC higher than that of the cutoff points of Asian adults was found in the $90^{th}P$ of 17-year-old boys and girls. The $90^{th}P$ of boys aged 15 years old and the $95^{th}P$ of 13-year-old were included in the range of systolic BP over 130 mm Hg. Over the $75^{th}P$ of the group showed triglycerides greater than 110 mg/dL, (criterion of MS presented by NCEP-ATP III) and the $90^{th}P$ of the group showed triglycerides greater than 150 mg/dL by IDF. An HDL cholesterol level of 40 mg/dL represents the $25^{th}P$ in boys and the $10^{th}P$ in girls. A glucose level greater than 110 mg/dL represents the $95^{th}P$ and greater than 100 mg/dL represents the $90^{th}P$. Conclusion :Values of the $90^{th}P$ of MS components in late adolescent boys (WC, BP, and triglycerides) and girls (WC and triglycerides) were very high and in close proximity to the diagnostic criteria of adult MS.

• Korean Journal of Environmental Biology
• /
• v.28 no.3
• /
• pp.133-142
• /
• 2010

This study was performed to investigate the community structure of the macrobenthic invertebrates around Ui Island, Sinan-gun, Jeollanam-do, Korea. Benthic invertebrates were collected during May and September 2008 at seven stations. A total of 63 macrobenthic species was collected. The overall average macrobenthos density and biomass were 268 inds. $m^{-2}$ and 11.54 gWWt $m^{-2}$, respectively. Based on abundance data, there were 5 dominant species accounting for approximately 72.00% of total individuals. The polychaetes Notomastus latericeus, Scolelepis sagittaria, Amaeana occidentalis, Glycera chirori and the amphipoda Mandibulophoxus mai were found in high densities. The conventional multi-variate statistics (cluster analysis and non-metric multidimensional scaling) applied to assess spatial variation in macrobenthic assemblages. As a result, three communities could be distinguished: a sand dominated, a mixed sediment and a third community in the mud dominated station. The community in the sand dominated station was characterized by high abundance of the polychaetes S. sagittaria and the amphipods M. mai, Monoculodes sp. and Grandifoxus malipoensis. However, the most common species within the mixed sediment station were the polychaetes N. latericeus, A. occidentalis and amphipoda Urothoe sp.. Finally the mud dominated station was numerically dominated by the polychaetes Scolelepis sp., Heteromastus filiformis and Sigambra tentaculata. In conclusion, the sediment composition may be important factors controlling of the macrobenthic community structure in the study area.

• Radiation Oncology Journal
• /
• v.15 no.2
• /
• pp.153-158
• /
• 1997

Purpose : The Dual-Energy Quantitative Computed Tomography(DEQCT) was compared with bone equivalent $K_2HPO_4$ standard solution and ash weight of animal cadaveric trabecular bone in the measurement of bone mineral contents(BMC). Method and Materials : The attenuation coefficient of tissues highly depends on the radiation energy density and effective atomic number of composition, The bone mineral content of DEQCT in this experiments was determined from empirical constants and mass attenuation coefficients of bone,fat and soft tissue equivalent solution in two photon spectra. In this experiments, the BMC of DEQCT with 80 and $120kV_p$ X rays was compared to ash weight of animal trabecular bone. Results : We obtained the mass attenuation coefficient of 0.2409 0.5608 and 0.2206 in $80kV_p$, and 0.2046, 0.3273 and $0.1971cm^2/g$ in $120kV_p$ X-ray spectra for water bone and fat equivalent materials, respectively. The BMC with DEQCT was acomplished with empirical constants $K_1=0.3232,\;K_2$=0.2450 and mass attenuation coefficients has very closed to ash weight of animal trabecular bone The BMC of empirical DEQCT and that of manufacturing DEQCT were correlated with ash weight as a correlation r= 0.998 and r= 0.996, respectively. Conclusion : The BMC of empirical DEQCT using the experimental mass attenuation coefficients and that of manufacture have showed very close to ash weight of animal trabecular bone.

• Journal of radiological science and technology
• /
• v.32 no.3
• /
• pp.271-276
• /
• 2009

The aim of this study was to evaluate the effect of Bone Mineral Density(BMD) at mandible. So, we studied how to measure the BMD at mandible using DEXA(Dual energy X-ray absorptiometry, DEXA) by Horner er al (1996) and knew reproducibility of the measurements. Thirty-five patients (13 men, 22 women, mean age : 25.4 years) were examined using the GE Lunar Prodigy Advance(LUNAR Corporation, madison, USA). They were examined in Semiprone position of their body and true lateral position of their mandible selected the Lumbar lateral mode. We used the custom mode in analysis when ROI (area $30{\times}2.5\;mm^2$). Three ROIs ($30{\times}2.5\;mm^2$, $50{\times}2.5\;mm^2$, $20{\times}2.5\;mm^2$) were located each at the two different sites of the mandible (angle of mandible and mental symphysis) and BMD was measured. Differences in BMD measurement was statistically compared according to the size and location of ROI. BMD was $1.320{\pm}0.358g/cm^3$ in men and was $1.152{\pm}0.340g/cm^3$ in women. BMD at the angle of mandible was $1.201{\pm}0.361g/cm^3$ in men and was $1.025{\pm}0.377g/cm^3$ in women. BMD of men at the mental symphysis was $1.434{\pm}0.341g/cm^3$ and that of women was $1.19{\pm}0.358g/cm^3$. With the ROI of $20{\times}2.5\;mm^2$, BMD was $1.262{\pm}0.384g/cm^3$ in men and was $1.113{\pm}0.357g/cm^3$ in women. With the ROI of $50{\times}2.5\;mm^2$, BMD of men was $1.320{\pm}0.358g/cm^3$ and that of women was $1.129{\pm}0.340g/cm^3$. There was a statistically significant difference of BMD according to the size and location of ROI. When measuring mandible BMD, there are good for increasing ROI and locate between ramus and mental symphysis. Especially following exam, refer to same size and location with fore exam. According to study which measure mandible BMD, It's correct to measure better a portion of mandible then whole of BMD. Using DEXA protocol is studied good for the additional study to compare the BMD at mandible. Later date, It will be good for measurement value in implant and bone graft quantitatively. Using DEXA method gain BMD threshold value in korean.