• 제목/요약/키워드: demolition debris

검색결과 7건 처리시간 0.018초

건설폐기물 재활용촉진을 위한 종류별 분류 및 발생원단위 산정 방안 (The method for the classification according to their kinds and the estimation of unit generation rate for promoting recycling of construction and demolition(c&d) debris)

  • 이희선;김동식
    • 한국재난정보학회 논문집
    • /
    • 제4권1호
    • /
    • pp.86-100
    • /
    • 2008
  • It is needed to classify the kinds of construction and demolition(c&d) debris to 6 catagories of waste concrete, waste asphalt concrete, waste wood, scraps, combustible waste and incombustible waste in order to properly do a separate discharge and to estimate unit generation rate in construction site. Also, in this case, the unit treating cost for mixed wastes should be applied with the unit treating cost for combustible waste. The construction standard materials estimation data is used for basic data for estimating unit generation rate. The mixed wastes in this data should be classified to waste wood, combustible waste and incombustible waste, and their ratio is obtained by using the unit generation rate of Asia Pacific Environment and Management Institute and Seoul Metropolitan Development Institute. The waste amounts generated from newly-built construction can be obtained from multiplying the loss rate by the amount of materials used from construction standard estimation data. Also, those from dismantling construction can be obtained by subtracting waste amount generated during newly-built construction from total input amount of materials in newly-built construction. Those in two cases can be used in construction site. It can be used for estimating the amount generated and establishing the treating plan in the case of setting up the policy of waste management and doing the environment impact assessment.

  • PDF

Application of Accelerated Carbonation Reaction for Low Alkalinity of Recycled Aggregate

  • Lee, Jong-Chan;Lee, Sae-Hyun;Yoon, Sang-Hyuck;Song, Tae-Hyeob
    • 한국건축시공학회지
    • /
    • 제11권5호
    • /
    • pp.515-522
    • /
    • 2011
  • As Construction and Demolition (C&D) debris increases every year, systems have been adopted to compel the use of recycled aggregate made from C&D debris, and the use of recycled aggregate in the construction field has increased. But environmental problems linked to the alkalinity of recycled aggregate have occurred, and a study on approaches to lower the alkalinity of recycled aggregate is needed. It was certified by this study that a large amount of recycled aggregate could be carbonated in the C&D debris midterm-treatment field. As a result, the density and the water absorption of recycled aggregate after carbonation reaction was improved, and pH of recycled aggregate was lowered from over 11 to 9.4. X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS), and Thermogravimetry/Differential Thermal Analysis (TG/DTA) methods also indicated the carbonation of recycled aggregate.

건설폐기물의 원단위 산정기준에 관한 연구 (A Study on Estimating Units of Construction & Demolition Debris)

  • 김효진;김창학;이철규
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2004년도 제5회 정기학술발표대회 논문집
    • /
    • pp.500-503
    • /
    • 2004
  • 급속한 경제성장과 더불어 복지 및 생활여건의 개선에 따라 재개발 $\cdot$ 재건축이 크게 증가하고 있으며, 또한 변화하는 사회 환경에 맞추어 건설공사의 규모 또한 점차 대형화 되어가고 있는 추세이다. 따라서 이러한 재개발 재건축 등의 활성화로 인하여 도심지 해체공사가 증가함에 따라 건설폐기물의 발생량이 대폭 증가하고 있다. 따라서 건설폐기물의 적정관리는 매우 중요한 사항이 되어 가고 있으나, 발생 폐기물을 정확히 예측하기 위한 연구가 부족하였다. 따라서 본 연구에서는 공통주택의 해체물량을 정확히 예측학 수 있는 건설폐기물 원단위 산정 기준을 제시한다. 이것은 해체공사 시 발생 가능한 건설폐기물을 손쉽고 정확히 예측할 수 있으며, 이것은 국가 폐기물 정책에 매우 중요한 자료로 활용될 수 있을 것이다.

  • PDF

아파트 리모델링을 위한 부분해체에서 슬래브의 구조적 거동 (Structural Behavior of Slab in the Partial Demolition for the Apartment Remodeling)

  • 최훈;주형중;김효진;윤순종
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제16권2호
    • /
    • pp.19-30
    • /
    • 2012
  • 사회적 생활 환경이 향상되고 도시개발이 안정화됨에 따라 신규 주택건설공사에 대한 요구는 점진적으로 감소하고 있다. 이에, 신축 보다는 정비를 통해 구조물의 사용수명을 연장시키는 리모델링의 중요성이 강조되고 있으며, 이와 관련된 많은 연구들이 진행중에 있다. 그러나 국내의 경우 리모델링 해체공사를 위한 구조해석 관련 기준이 미흡한 실정이다. 국내 보고된 리모델링 해체 공사도중에 발생한 사고중 슬래브 붕괴사고는 다수를 차지하고 있으며, 대형사고로 발전할 수 있는 위험성을 내포하고 있어 리모델링 해체공사에 적용할 수 있는 구조해석 관련 기준의 개발은 중요하면서도 시급하다. 슬래브의 경우 하중을 직접적으로 저항하기 때문에 균열에 취약해 질수 있고 균열이 발생할 경우 리모델링의 근본취지에 어긋남과 동시에 붕괴사고의 원인이 될 수 있으므로, 초기균열을 억제함은 상당히 중요하다고 볼 수 있다. 따라서 이 연구는 슬래브 구조물의 초기균열을 억제하기 위한 기준을 마련하기 위한 기초자료를 제공하기 위해 수행되었다. 슬래브 구조물의 구조적 거동과 관련된 주요 요소로는 구조물의 형상과 구조물에 작용하는 하중이 있다. 슬래브 구조물의 형상과 작용하중과의 상호관계를 파악하기 위해 국내 아파트 평면도를 분석하였으며, 해체잔해물의 단위중량, 콘크리트 강도 등과 관련된 자료를 분석하였다. 분석결과를 활용하여 유한요소해석을 실시하였으며, 유한요소해석결과 주요 하중요소인 해체잔해물의 적재제한높이 및 적재방법에 대해 검토할 수 있었다. 또한, 소형해체장비의 이동에 따른 슬래브의 구조적 거동을 파악하기 위해 동적, 정적 재하실험을 실시하였으며, 실험결과 이동하중에 따른 충격의 영향을 반영할 수 있는 충격계수를 결정할 수 있었다.

순환골재 알카리 저감장치의 현장 최적화에 관한 연구 (A Study on the Optimization of Recycled Aggregate Alkalinity Reducing Facility in the Field)

  • 이종찬;송태협;이세현;김종복
    • 한국건설순환자원학회논문집
    • /
    • 제6권3호
    • /
    • pp.53-60
    • /
    • 2011
  • 건설폐기물이 매년 증가함에 따라 제도적으로 건설폐기물을 재활용한 순환골재의 사용을 촉진하게 되었고, 이에 따라 현장에 순환골재의 사용이 증가되었다. 그러나 순환골재의 알카리수 용출에 의한 환경적 문제가 발생하게 되었고, 이를 저감시킬 방안에 대한 연구가 요구되었다. 본 연구는 순환골재의 알카리저감을 위한 방안으로 촉진탄산화 반응을 이용한 알카리 저감장치를 제작하여 순환골재 생산현장에 설치하고, 대량의 순환골재를 대상으로 알카리저감효과 및 품질의 영향을 분석하였다. 그 결과, 탄산화 반응시간 30초, 반응압력 -50 kPa에서 100 kPa까지 3싸이클의 압력변화를 주는 조건에서, 순환골재 pH는 9.33에서 9.8의 범위 내를 유지하였다. 또한 순환골재의 물리적 품질은 탄산화 반응 전보다 반응 후의 소성지수, 수정 CBR, 마모감량, 모래당량, 액성한계, 입도분포, 밀도 및 흡수율이 개선되는 것으로 나타났다.

  • PDF

Optimizing Urban Construction and Demolition Waste Management System Based on 4D-GIS and Internet Plus

  • Wang, Huiyue;Zhang, Tingning;Duan, Huabo;Zheng, Lina;Wang, Xiaohua;Wang, Jiayuan
    • 국제학술발표논문집
    • /
    • The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
    • /
    • pp.321-327
    • /
    • 2017
  • China is experiencing the urbanization at an unprecedented speed and scale in human history. The continuing growth of China's big cities, both in city land and population, has already led to great challenges in China's urban planning and construction activities, such as the continuous increase of construction and demolition (C&D) waste. Therefore, how to characterize cities' construction activities, particularly dynamically quantify the flows of building materials and construction debris, has become a pressing problem to alleviate the current shortage of resources and realize urban sustainable development. Accordingly, this study is designed to employ 4D-GIS (four dimensions-Geographic Information System) and Internet Plus to offer new approach for accurate but dynamic C&D waste management. The present study established a spatio-temporal pattern and material metabolism evolution model to characterize the geo-distribution of C&D waste by combing material flow analysis (MFA) and 4D-GIS. In addition, this study developed a mobile application (APP) for C&D waste trading and information management, which could be more effective for stakeholders to obtain useful information. Moreover, a cloud database was built in the APP to disclose the flows of C&D waste by the monitoring information from vehicles at regional level. To summarize, these findings could provide basic data and management methods for the supply and reverse supply of building materials. Meanwhile, the methodologies are practical to C&D waste management and beyond.

  • PDF