• Journal of Biosystems Engineering
• /
• v.20 no.1
• /
• pp.22-35
• /
• 1995

Pepper is the most important horticultural plant in Korean farm. Pepper harvesting has been known to be the most difficult process in pepper cultivation so that demand for mechanization is strong. In a research to develop a pepper harvesting machine performance and capacity of the harvester should be determined based on both economical feasibility and machine design concept. In order to accomplish an economical analysis of the pepper harvester, a mathematical model for comparing manual harvesting cost to machine harvest cost was developed. Validity of the model depends on the data used in the model. Economical information for the model variables was acquired from the result of farm survey on pepper cultivation technique and economics of pepper farmer. Technical information on pepper harvester were also collected through literature review and analyzed. Based on the economical analysis and synthesis of the technical information on pepper harvesters, its performance and capacity were determined. The operating performances of the harvester such as cutting, conveying, flipping, pepper removing and post-processing (sorting) were determined. Daisy capacity of the machine was determined to be 0.41 ha. A pepper harvester with the suggested capacity was economically feasible if the price of pepper harvester, pepper recovery ratio and service life of harvester were about 6 million won, 80%, and 4 years, respectively.

• Computers and Concrete
• /
• v.2 no.5
• /
• pp.367-380
• /
• 2005

Recent earthquakes have shown that many of existing buildings in Iran sustain heavy damage due to defective seismic details. To assess vulnerability of one common type of buildings, which consists of low rise framed concrete structures, three defective and three standard columns have been tested under reversed cyclic load. The substandard specimens suffered in average 37% loss of strength and 45% loss of energy dissipation capacity relative to standard specimens, and this was mainly due to less lateral and longitudinal reinforcement and insufficient sectional dimensions. A relationship has been developed to introduce variation of plastic length under increasing displacement amplitude. At ultimate state, the length of plastic hinge is almost equal to full depth of section. Using calibrated hysteresis models, the response of different specimens under two earthquakes has been analyzed. The analysis indicated that the ratio between displacement demand and capacity of standard specimens is about unity and that of deficient ones is about 1.7.

• Journal of Korean Society of Transportation
• /
• v.33 no.2
• /
• pp.145-158
• /
• 2015

A network connectivity has been regarded as a key element to strengthen a business competitive power in the aviation industry, so many airport authorities try to attract the new airlines and scheme out new air routes. With this trend, a study for an induced travel demand estimation methodology is needed. This study introduces a demand estimation method, especially for a new air route to a promising destination. With the results of previous studies, the derived demand is classified into four types - Local, Beyond, Behind and Bridge. The explanatory variables are established for each type of demand and the main independent variables are composed of distance, ratio of detour, and relative capacity compared with other airports. The equations using such variables and statistically significant coefficients are suggested as the model to make an estimation of derived demand for a new route. Therefore this study will be expected to take an initial step for all related parties to be involved more deeply into developing new air routes to enhance network connectivity.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.6
• /
• pp.629-636
• /
• 2011

It has been suggested that buildings designed for strong ground motions will also have improved resistance to air blast loads. As an initial attempt to quantify this behavior, the responses of a ten story steel building, designed for the 1994 building code, with lateral resistance provided by perimeter moment frames, is considered. An analytical model of the building is developed and the magnitude and distribution of blast loads on the structure are estimated using available computer software that is based on empirical methods. To obtain the relationship between pressure, time duration, and standoff distance, these programs are used to obtain an accurate model of the air blast loading. A hemispherical surface burst for various explosive weights and standoff distances is considered for generating the air blast loading and determining the structural response. Linear and nonlinear analyses are conducted for these loadings. Air blast demands on the structure are compared to current seismic guidelines. These studies present the displacement responses, story drifts, demand/capacity ratio and inelastic demands for this structure.

• Journal of Energy Engineering
• /
• v.18 no.1
• /
• pp.22-30
• /
• 2009

Recently, energy efficiency is important in Korea. This paper reviews shadow amount to perform economic analysis for CHP that converts existing equipment in industrial area. It is verified that shadow amount analyze effects of gas and electric demand.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.741-748
• /
• 2006

Seismic performance evaluation was conducted for four wind-designed concentrically braced steel highrise buildings in order to check the feasibility of designing steel highrise buildings per elastic seismic design criterion (or strength and stiffness solution) in the regions of strong wind and moderate seismicity. The pushover analysis results revealed that the wind-designed highrise buildings possess significantly increased elastic seismic capacity due to the overstrength resulting from the wind serviceability criterion. The strength demand-to-capacity study showed that, due to the wind-induced overstrength, highrise buildings with a slenderness ratio of larger than four or five can withstand elastically even the maximum considered earthquake at the performance level of immediate occupancy. Based on the analytical results of this study, practical elastic seismic design procedure for steel highrise buildings in the regions of moderate seismicity is proposed.

• Steel and Composite Structures
• /
• v.25 no.5
• /
• pp.617-624
• /
• 2017

In this study, a new empirical method is presented to obtain Dynamic Increase Factor (DIF) in nonlinear static analysis of structures against sudden removal of a gravity load-bearing element. In this method, DIF is defined as a function of minimum ratio of difference between maximum moment capacity ($M_u$) and moment demand ($M_d$) to plastic moment capacity ($M_p$) under unamplified gravity loads of elements. This function determines the residual strength of a damaged building before amplified gravity loads. For each column removal location, a nonlinear dynamic analysis and a step-by-step nonlinear static analysis are carried out and the modified empirical DIF formulas are derived, which correspond to the ratio min $[(M_u-M_d)/M_p]$ of beams in the bays immediately adjacent to the removed column, and at all floors above it. Therefore, the new DIF can be used with nonlinear static analysis instead of nonlinear dynamic analysis to assess the progressive collapse potential of a moment frame structure. The proposed DIF formulas can estimate the real residual strength of a structure based on critical member.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1903-1905
• /
• 2000

Power transformers have a tendency of ultra-high voltage capacity as power demand increases day after day KEPCO also will have plan to supply transmission power from 345KV to 765KV in the early of 2000. Therefore, the fault by insulation destruction gives rise to large area of power failure in huge capacity transformers. On-line predictive diagnostics is very important in power transformers because of economic loss and its spreading effect. This study presents the algorithm for transformer oil analysis used KEPCO code, IEC code, gas pattern method and Dornenburg & Roger Ratio method. We also describe the MMI display of expert system programmed by Element Expert Tool(Neuron Data Inc.).

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.877-887
• /
• 2003

For a performance-based design of structural walls, it is necessary to develop a rational design method for determining the length and detail of boundary confinement so as to satisfy the given ductility demand. In the present study, the curvature capacity of a structural wall with boundary confinement was estimated considering the effects of various design parameters. The curvature demand of the plastic hinge corresponding to the given design displacement was also determined. By equalizing the curvature capacity to the demand, a design method for determining the length of boundary confinement, was developed. According to the design method, the length of boundary confinement increases as axial compressive load and design displacement increase, and as concrete strength, wall thickness, amount of lateral reinforcement and aspect ratio decrease. A study was performed on details for effective lateral confinement of walls with rectangular cross-section. Based on the findings, design guidelines on spacings of ties and cross-ties were proposed.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.1
• /
• pp.49-58
• /
• 2004

This study is to analyze the affecting factors to the peak factor in the drinking water supply Facilities. The peak factor is a very important element to determine the capacity of the water supply facllities. Several factors such as Population served, average day water demand, ratio of domestic water use, ratio of affairs & business water use and water use per capital per day were selected as the affecting factors in this study. In this study, peak factor characteristics for Korean facilities were compared with those for Japanese ones. As a result, non-exceedance probability was suggested as the designing method for the peak factor. Also, the 50% non-exceedance probability values and the 90% values based on the 1998-1999 data were suggested in this study.