• Earthquakes and Structures
• /
• v.15 no.6
• /
• pp.701-713
• /
• 2018

Many bridges in Algeria were constructed without taking into account the seismic effect in the design. The implantation of a new regulation code RPOA-2008 requires a higher reinforcement ratio than with the seismic coefficient method, which is a common feature of the existing bridges. For better perception of the performance bridge piers and evaluation of the risk assessment of existing bridges, fragility analysis is an interesting tool to assess the vulnerability study of these structures. This paper presents a comparative performance of bridge piers designed with the seismic coefficient method and the new RPOA-2008. The performances of the designed bridge piers are assessed using thirty ground motion records and incremental dynamic analysis. Fragility curves for the bridge piers are plotted using probabilistic seismic demand model to perform the seismic vulnerability analysis. The impact of changing the reinforcement strength on the seismic behavior of the designed bridge piers is checked by fragility analysis. The fragility results reveal that the probability of damage with the RPOA-2008 is less and perform well comparing to the conventional design pier.

• Korean Journal of Materials Research
• /
• v.29 no.9
• /
• pp.525-531
• /
• 2019

The widespread use of automobiles has greatly increased energy demand and exhaust gas pollution. In order to save energy, reduce emissions and protect the environment, making lightweights automobiles is an effective measure. In this paper, carbon fiber composites and automobile B-pillars are briefly introduced, and then the mechanical properties and impact resistance of the DC590 steel B-pillars and carbon fiber composites B-pillars are simulated by the ABAQUS finite element software. The results show that the quality of compound B-pillars is reduced by 50.76 % under the same dimensions, and the mechanical property of unit mass is significantly better than that of metal B-pillars. In the course of a collision, the kinetic energy of the two B-pillars is converted into internal energy, but the total energy remains the same; the converted internal energy of the composite B-pillars is greater, the deformation is smaller and the maximum intrusion and intrusion speed is also smaller, indicating that the anti-collision performance of the composite B-pillars is excellent. In summary, the carbon fiber composites can not only reduce the quality of the B-pillars, but also improve their anti-collision performance.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.2
• /
• pp.75-85
• /
• 2019

Background: Medicinal plants are widely used in Asia. They have proven to be an invaluable asset in modern drug discovery and their demand has been steadily increasing across various industries. Methods and Results: Using 4,867 valid patents related to 12 oriental medicinal plants of 10 country groups, the growth and development potential of patents was evaluated. The cites per patent (CPP) and patent family size (PFS) indices were used to evaluate the market capability and technological level of the collected patents. Meanwhile, the patent impact index (PII) and technology strength (TS) were used to compare the technological competitiveness of patents among various technology types and markets. Both CPP and PFS indices showed that magnolia-vine and balloon flower have numerous core or original patents. Furthermore, an increase in both PII and TS indices was observed. A newly designed intellectual property multi-layer (IPM) model predicted that the medicine, genome and cosmetic categories have a high possibility of patent application growth. Conclusions: The IPM model can be used to provide the scope of particular technology fields for patent development. In addition, this study can assist patents to advance in the international market and guide the development of a national industrial strategy.

• The Korean Journal of Health Service Management
• /
• v.12 no.4
• /
• pp.127-138
• /
• 2018

Objectives: The purpose of this study was to identify the intrinsic strengths and weaknesses, as well as opportunities for success and threats of Korean health care industry when planning strategies to enter Chinese health care market. Methods: To suggest directions for planning the strategies, a SWOT(Strengths, Weaknesses, Opportunities, Threats) analysis was used in combination with an AHP(Analytic Hierarchy Process) in this study. A total of twenty SWOT factors and the relative weight of SWOT groups were examined through a survey on the respondents who have work experiences in the area of entering Chinese market. Results: "Geographical proximity between Korea and China" was recognized as a key strength. "Absence of success case in medical service industry" was selected as a critical weakness. "Increase in demand for advanced medical services in China" was identified as an important opportunity. "Difficulty in establishing Korea-China partnership" was considered as a major threat. The respondents prioritized weaknesses, followed by threats, opportunities, and strengths when conducting strategic planning to enter Chinese health care market. Conclusions: Improving local hospital management plan as well as specializing in certain health care services may be necessary.

• Geomechanics and Engineering
• /
• v.23 no.6
• /
• pp.503-512
• /
• 2020

Mining activities focus on the production of mineral resources for energy generation and raw material requirements worldwide and it is a known fact that shallow reserves become scarce. For this reason, exploration of new resources proceeds consistently to meet the increasing energy and raw material demand of industrial activities. Rock mechanics has a vital role in underground mining and surface mining. Devices and instruments used in laboratory testing to determine rock mechanics related parameters might have limited sensing capability of the failure behavior. However, methodologies such as, thermal cameras, digital speckle correlation method and acoustic emission might enable to investigate the initial crack formation in detail. Regarding this, in this study, thermographic analysis was performed to analyze the failure behaviors of different types of rock specimens during uniaxial compressive strength experiments. The energy dissipation profiles of different types of rocks were characterized by the temperature difference recorded with an infrared thermal camera during experiments. The temperature increase at the failure moment was detected as 4.45℃ and 9.58℃ for andesite and gneiss-schist specimens, respectively. Higher temperature increase was observed with respect to higher UCS value. Besides, a temperature decreases of about 0.5-0.6℃ was recorded during the experiments of the marble specimens. The temperature change on the specimen is related to release of radiation energy. As a result of the porosity tests, it was observed that increase in the porosity rate from 5.65% to 20.97% can be associated to higher radiation energy released, from 12.68 kJ to 297.18 kJ.

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.300-305
• /
• 2020

In recent times, polymeric foams have been popularly used in various applications. To meet the demand for these applications, polymer foams with excellent mechanical and thermal properties are required. In particular, silicone foam has gained significant attention owing to its superior thermal properties and low density. In this study, the mechanical and thermal properties of silicone foams filled with wollastonite were investigated. A maximum tensile strength of 98.3 kPa was obtained by adding 15 phr of wollastonite. The specific gravity did not exhibit a marked difference up to 10 phr, but it increased substantially above 15 phr wollastonite. Thermogravimetric analysis indicated that adding wollastonite to the silicone foam increased both the amount of residue and the thermal decomposition temperature. The morphologies of the silicone foams filled with wollastonite were observed by scanning electron microscopy.

• Earthquakes and Structures
• /
• v.20 no.1
• /
• pp.97-107
• /
• 2021

A comprehensive study on seismic performance of wood frame building in hilly regions is presented. Specifically, seismic fragility assessment of a typical wood frame building at various locations of the northeast region of India are demonstrated. A three-dimensional simplified model of the wood frame building is developed with due consideration to nonlinear behaviour of shear walls under lateral loads. In doing so, a trilinear model having improved capability to capture the force-deformation behaviour of shear walls including the strength degradation at higher deformations is proposed. The improved capability of the proposed model to capture the force-deformation behaviour of shear wall is validated by comparing with the existing experimental results. The structural demand values are obtained from nonlinear time history analysis (NLTHA) of the three-dimensional wood frame model considering the effect of uncertainty due to record to record variation of ground motions and structural parameters as well. The ground motion bins necessary for NLTHA are prepared based on the identified hazard level from probabilistic seismic hazard analysis of the considered locations. The maximum likelihood estimates of the lognormal fragility parameters are obtained from the observed failure cases and the seismic fragilities corresponding to different locations are estimated accordingly. The results of the numerical study show that the wood frame constructions commonly found in the region are likely to suffer minor cracking or damage in the shear walls under the earthquake occurrence corresponding to the estimated seismic hazard level; however, poses negligible risk against complete collapse of such structures.

• International Journal of Contents
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2021

Visual analytics is an emerging research field that combines the strength of electronic data processing and human intuition-based social background knowledge. This study demonstrates useful visual analytics with Tableau in conjunction with semantic network analysis using examples of sentiment flow and strategic communication strategies via Twitter in a blockchain domain. We comparatively investigated the sentiment flow over time and language usage patterns between companies with a good reputation and firms with a poor reputation. In addition, this study explored the relations between reputation and marketing communication strategies. We found that cryptocurrency firms more actively produced information when there was an increased public demand and increased transactions and when the coins' prices were high. Emotional language strategies on social media did not affect cryptocurrencies' reputations. The pattern in semantic representations of keywords was similar between companies with a good reputation and firms with a poor reputation. However, the reputable firms communicated on a wide range of topics and used more culturally focused strategies, and took more advantages of social media marketing by expanding their outreach to other social media networks. The visual big data analytics provides insights into business intelligence that helps informed policies.

• Structural Engineering and Mechanics
• /
• v.84 no.1
• /
• pp.77-83
• /
• 2022

In the last ten years, many researchers have studied the vibrations of carbon nanotubes using different beam theories. The nano- and micro-scale systems have wavy shape and there is a demand for a powerful tool to mathematically model waviness of those systems. In accordance with the above mentioned lack for the modeling of the waviness of the curved tiny structure, a novel approach is employed by implementing the Timoshenko-beam model. Owing to the small size of the micro beam, these structures are very appropriate for designing small instruments. The vibrations of double walled carbon nanotubes (DWCNTs) are developed using the Timoshenko-beam model in conjunction with the wave propagation approach under support conditions to calculate the fundamental frequencies of DWCNTs. The frequency influence is observed with different parameters. Vibrations of the double walled carbon nanotubes are investigated in order to find their vibrational modes with frequencies. The aspect ratios and half axial wave mode with small length are investigated. It is calculated that these frequencies and ratios are dependent upon the length scale and aspect ratio.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.2
• /
• pp.87-93
• /
• 2022

The demand for metal-polymer joining technology have been increasing, especially in the industrial fields of automotive and aerospace, which require the manufacturing of various lightweight parts. Conventional joining processes have technical hurdles on aspects such as thermal degradation, need for chemical surface treatment, or complicated process settings. These issues can be alleviated by employing interlocking structures for the metal-polymer joined interface. In this study, we joined 3D-printed metal and polymer parts, which were featured with 3D-printed interlocking structures at their interface. By using high frequency induction heating, the joined region could be locally heated to reduce the thermal degradation and distortion of polymer parts. In addition, through the adjustment of interface morphologies and compression conditions, the polymer flow could be optimized to completely fill the interlocking grooves on metal parts, thereby achieving high joining strength. This suggests feasible guidelines for manufacturing metal-polymer joined structures involving 3D-printed architectures.