Browse > Article
http://dx.doi.org/10.12989/gae.2020.23.6.503

Thermographic analysis of failure for different rock types under uniaxial loading  

Kirmaci, Alper (Department of Mining Engineering, Middle East Technical University)
Erkayaoglu, Mustafa (Department of Mining Engineering, Middle East Technical University)
Publication Information
Geomechanics and Engineering / v.23, no.6, 2020 , pp. 503-512 More about this Journal
Abstract
Mining activities focus on the production of mineral resources for energy generation and raw material requirements worldwide and it is a known fact that shallow reserves become scarce. For this reason, exploration of new resources proceeds consistently to meet the increasing energy and raw material demand of industrial activities. Rock mechanics has a vital role in underground mining and surface mining. Devices and instruments used in laboratory testing to determine rock mechanics related parameters might have limited sensing capability of the failure behavior. However, methodologies such as, thermal cameras, digital speckle correlation method and acoustic emission might enable to investigate the initial crack formation in detail. Regarding this, in this study, thermographic analysis was performed to analyze the failure behaviors of different types of rock specimens during uniaxial compressive strength experiments. The energy dissipation profiles of different types of rocks were characterized by the temperature difference recorded with an infrared thermal camera during experiments. The temperature increase at the failure moment was detected as 4.45℃ and 9.58℃ for andesite and gneiss-schist specimens, respectively. Higher temperature increase was observed with respect to higher UCS value. Besides, a temperature decreases of about 0.5-0.6℃ was recorded during the experiments of the marble specimens. The temperature change on the specimen is related to release of radiation energy. As a result of the porosity tests, it was observed that increase in the porosity rate from 5.65% to 20.97% can be associated to higher radiation energy released, from 12.68 kJ to 297.18 kJ.
Keywords
failure; laboratory analysis; rock; stress-strain relations; energy geomechanics;
Citations & Related Records
Times Cited By KSCI : 11  (Citation Analysis)
연도 인용수 순위
1 Abuel-Naga, H.M., Bouazza, A. and Gates, W. (2013), "Impact of bentonite form on the thermal evolution of the hydraulic conductivity of geosynthetic clay liners", Geotechnique Lett., 3(2), 26-30. https://doi.org/10.1680/geolett.13.007.   DOI
2 Antony, S.J., Olugbenga, A., Ozerkan, N., Marumoame, O. and Okeke, G. (2017), "Sensing temperature and stress distributions on rock samples under mechanical", Proceedings of the 15th Biennial ASCE Conference on Engineering, Science, Construction, and Operations in Challenging Environments, Orlando, Florida, U.S.A., April.
3 Aydan, O. and Ulusay, R. (2013), "Geomechanical evaluation of derinkuyu antique underground city and its implications in geoengineering", Rock Mech. Rock Eng., 46(4), 731-754. https://doi.org/10.1007/s00603-012-0301-7   DOI
4 Aydan, O., Manav, H., Yaoita, T. and Yagi, M. (2014), "Multi-parameter thermo-dynamic response of minerals and rocks during deformation and fracturing", Proceedings of the ISRM International Symposium - 8th Asian Rock Mechanics Symposium, Japan, Sapporo, October.
5 Cermak, V. and Rybach, L. (1982), Thermal Conductivity and Specific Heat of Minerals and Rocks, in Geophysics- Physical Properties of Rocks, Springer, 305-343.
6 Chen, G., Li, T., Wang, W., Guo, F. and Yin, H. (2017), "Characterization of the brittleness of hard rock at different temperatures using uniaxial compression tests", Geomech. Eng., 13(1), 63-77. https://doi.org/10.12989/gae.2017.13.1.063   DOI
7 Deb, D. and Verma, A.K. (2016), Fundamentals and Applications of Rock Mechanics, PHI Learning, New Delhi, India.
8 Go, G.H., Lee, S.R., Kim, Y.S., Park, H.K. and Yoon, S. (2014), "A new thermal conductivity estimation model for weathered granite soils in Korea", Geomech. Eng., 6(4), 359-376. http://doi.org/10.12989/gae.2014.6.4.359.   DOI
9 He, M., Sousa, R., Miranda, T. and Zhu, G. (2015), "Rockburst laboratory tests database- Application of data mining techniques", Eng. Geol., 185, 116-130. https://doi.org/10.1016/j.enggeo.2014.12.008.   DOI
10 Gui, Y.L., Zhao, Z.Y., Ji, J., Wang, X.M., Zhou, K.P. and Ma, S.Q. (2016), "The grain effect of intact rock modelling using discrete element method with Voroni grains", Geotechnique Lett., 6(2), 136-143. https://doi.org/10.1680/jgele.16.00005.   DOI
11 Hong-lin, M. (2013), "Rock mechanical behaviors testing by digital speckle correlation method", J. Appl. Optics, 34, 123-127.   DOI
12 Jin, G.C., Wu, Z., Bao, N.K. and Yao, X.F. (2003), "Digital speckle correlation method with compensation technique for strain field measurements", Opt. Lasers Eng., 39, 457-464. https://doi.org/10.1016/S0143-8166(02)00028-3.   DOI
13 Kong, B., Wang, E. and Li, Z. (2018), "Regularity and coupling correlation between acoustic emission and electromagnetic radiation during rock heating process", Geomech. Eng., 15(5), 1125-1133. https://doi.org/10.12989/gae.2018.15.5.1125.   DOI
14 Lee, S.J., Kim, K.Y., Choi, J.C. and Kwon, T.H. (2016), "Experimental investigation on the variation of thermal conductivity of soils with effective stress, porosity, and water saturation", Geomech. Eng., 11(6), 771-785. http://doi.org/10.12989/gae.2016.11.6.771.   DOI
15 Lou, Q. and He, X. (2018), "Experimental study on infrared radiation temperature field of concrete under uniaxial compression", Infrared Phys. Techn., 90, 20-30. https://doi.org/10.1016/j.infrared.2018.01.033.   DOI
16 Read, R.S. (2004), "20 years of excavation response studies at AECL's underground research laboratory", Int. J. Rock Mech. Min. Sci., 41(8), 1251-1275. https://doi.org/10.1016/j.ijrmms.2004.09.012.   DOI
17 Ma, S., Wang, L. and Jin, G. (2006), "Damage evolution inspection of rock using digital speckle correlation method (DSCM)", Key Eng. Mater., 326, 1117-1120. https://doi.org/10.4028/www.scientific.net/KEM.326-328.1117.   DOI
18 Ma, S.P., Xu, X.H. and Zhao, Y.H. (2004), "The Geo-DSCM system and its application to the deformation", Int. J. Rock Mech. Min. Sci., 41, 292-297. https://doi.org/10.1016/j.ijrmms.2004.03.056.   DOI
19 Pappalardo, G., Mineo, S., Zampelli, S.P., Cubito, A. and Calcaterra, D. (2016), "Infrared thermography proposed for the estimation of the cooling rate index in the remote survey of rock masses", Int. J. Rock Mech. Min. Sci., 83, 182-196. https://doi.org/10.1016/j.ijrmms.2016.01.010.   DOI
20 Pasten, C., Garcia, M. and Carlos Santamarina, J. (2015), "Thermo-mechanical ratcheting in jointed rock masses", Geotechnique Lett., 5(2), 86-90. https://doi.org/10.1680/geolett.14.00118.   DOI
21 Salami, Y., Dana, C. and Hicher, P.Y. (2017), "Infrared thermography of rock fracture", Geotech. Lett., 7(1), 1-5. https://doi.org/10.1680/jgele.16.00131.   DOI
22 Tan, Y.Z., Liu, Y.X., Wang, P.Y. and Zhang, Y. (2016), "A predicting model for thermal conductivity of high permeability-high strength concrete materials", Geomech. Eng., 10(1), 46-57. https://doi.org/10.12989/gae.2016.10.1.049.   DOI
23 Tan, Z.H., Tang, C.A. and Zhu, W. (2007), "Infrared thermal image study on failure of granite with hole", Key Eng. Mater., 353, 2313-2316. https://doi.org/10.4028/www.scientific.net/KEM.353-358.2313.   DOI
24 Yin, T., Li, X., Cao, W. and Xia, K. (2015), "Effects of thermal treatment on tensile strength of Laurentian granite using Brazilian test", Rock Mech. Rock Eng., 48(6), 2213-2223. https://doi.org/10.1007/s00603-015-0712-3.   DOI
25 Ulusay, R., Aydan, O., Gercek, H., Hindistan, M.A. and Tuncay, E. (2016), Rock Mechanics and Rock Engineering: From the Past to the Future, CRC Press, London, U.K.
26 Vollmer, M. and Mollmann, K.P. (2017), Infrared Thermal Imaging: Fundamentals, Research and Applications, John Wiley & Sons, Weinheim, Germany.
27 Wang, C., Lu, Z., Liu, L., Chuai, X. and Lu, H. (2016), "Predicting points of the infrared precursor for limestone failure under uniaxial compression", Int. J. Rock Mech. Min. Sci., 88(10), 34-43. https://doi.org/10.1016/j.ijrmms.2016.07.004.   DOI
28 Wu, L., Liu, S., Wu, Y. and Wang, C. (2006), "Precursors for rock fracturing and failure-Part I: IRR image abnormalities", Int. J. Rock Mech. Min. Sci., 43(3), 473-482. https://doi.org/10.1016/j.ijrmms.2005.09.002.   DOI
29 Xie, H., Li, L., Peng, R. and Ju, Y. (2009), "Energy analysis and criteria for structural failure of rocks", J. Rock Mech. Geotech. Eng., 1(1), 11-20. https://doi.org/10.3724/SP.J.1235.2009.00011.   DOI
30 Yin, T., Zhang, S., Li, X. and Bai, L. (2018), "Evolution of dynamic mechanical properties of heated granite subjected to rapid cooling", Geomech. Eng., 16(5), 483-493. https://doi.org/10.12989/gae.2018.16.5.483.   DOI
31 Young, R.P. and Collins, D.S. (2001), "Seismic studies of rock fracture at the underground research laboratory, Canada", Int. J. Rock Mech. Min. Sci., 38(6), 787-799. https://doi.org/10.1016/S1365-1609(01)00043-0.   DOI
32 Zhang, Q.B. and Zhao, J. (2014), "A review of dynamic experimental techniques and mechanical behaviour of rock materials", Rock Mech. Rock Eng., 47(4), 1411-1478. https://doi.org/10.1007/s00603-013-0463-y.   DOI