• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.451-458
• /
• 2017

An Electric Vehicle (EV) is operated with the electric energy of a battery in place of conventional fossil fuels. Thus, a suitable charging infrastructure must be provided to expand the use of electric vehicles. Because the battery of an EV must be charged to operate the EV, expanding the number of EVs will have a significant influence on the power supply and demand. Therefore, to maintain the balance of power supply and demand, it is important to be able to predict the numbers of charging EVs and monitor the events that occur in the distribution system. In this paper, we predict the hourly charging rate of electric vehicles using transformation matrix, which can describe all behaviors such as resting, charging, and driving of the EVs. Simulation with transformation matrix in a specific region provides statistical results using the Monte-Carlo Method.

• 상하수도학회지
• /
• 제11권1호
• /
• pp.109-118
• /
• 1997

In this study, we examined the structural analysis of water demand fluctuation for water distribution control of water supply network. In order to analyze for the length of stationary time series, we calculate autocorrelation coefficient of each case equally divided data size. As a result, it was found that, with the data size of around three months, any case could be used as stationary time series. we analyze cross-correlation coefficient between the daily water consumption's data and primary influence factors. As a result, we have decided to use weather conditions and maximum temperature as natural primary factors and holidays as a social factor. Applying the multiple ARIMA model, we obtains an effective model to describe the daily water demand prediction. From the forecasting result, even though we forecast water distribution quantity of the following year, estimated values well express the flctuations of measurements. Thus, the suitability of the model for practical use can be confirmed. When this model is used for practical water distribution control, water distribution quantity for the following day should be found by inputting maximum temperature and weather conditions obtained from weather forecast, and water purification plants and service reservoirs should be operated based on this information while operation of pumps and valves should be set up. Consequently, we will be able to devise a rational water management system.

• 전기학회논문지
• /
• 제63권11호
• /
• pp.1608-1614
• /
• 2014

Power demand forecasting is an important factor of the peak management. This paper deals with the 15 minutes ahead load forecasting problem in a DC urban railway system. Since supplied power lines to trains are connected with parallel, the load characteristics are too complex and highly non-linear. The main idea of the proposed method for the 15 minutes ahead prediction is to use the daily load similarity accounting for the load nonlinearity. An Euclidean norm with weighted factors including loads of the neighbor substation is used for the similar load selection. The prediction value is determinated by the sum of the similar load and the correction value. The correction has applied the neural network model. The feasibility of the proposed method is exemplified through some simulations applied to the actual load data of Incheon subway system.

• 한국항만학회지
• /
• 제12권2호
• /
• pp.313-322
• /
• 1998

The distributions of chemical oxygen demand (COD) and suspended solid (SS) in Ulsan Bay were simulated and reproduced by a numerical ecosystem model for the practical application to the management of marine water quality and the prediction of water quality change due to coastal developments or the constructions of breakwater and marine facilities. Comparing the computed with the observed data of COD and SS in Ulsan bay the results of simulation were found to be good enough to satisfy the practical applications.

• ETRI Journal
• /
• 제44권2호
• /
• pp.244-259
• /
• 2022

Bicycle- or bike-sharing systems (BSSs) have received increasing attention as a secondary transportation mode due to their advantages, for example, accessibility, prevention of air pollution, and health promotion. However, in BSSs, due to bias in bike demands, the bike rebalancing problem should be solved. Various methods have been proposed to solve this problem; however, it is difficult to apply such methods to small cities because bike demand is sparse, and there are many practical issues to solve. Thus, we propose a demand prediction model using multiple classifiers, time grouping, categorization, weather analysis, and station correlation information. In addition, we analyze real-world relocation data by relocation managers and propose a relocation algorithm based on the analytical results to solve the bike rebalancing problem. The proposed system is compared experimentally with the results obtained by the real relocation managers.

• Earthquakes and Structures
• /
• 제12권3호
• /
• pp.321-332
• /
• 2017

The reverse fault is a dangerous geological hazard faced by buried steel pipelines. Permanent ground deformation along the fault trace will induce large compressive strain leading to buckling failure of the pipe. A hybrid pipe-shell element based numerical model programed by INP code supported by ABAQUS solver was proposed in this study to explore the strain performance of buried X80 steel pipeline under reverse fault displacement. Accuracy of the numerical model was validated by previous full scale experimental results. Based on this model, parametric analysis was conducted to study the effects of four main kinds of parameters, e.g., pipe parameters, fault parameters, load parameter and soil property parameters, on the strain demand. Based on 2340 peak strain results of various combinations of design parameters, a semi-empirical model for strain demand prediction of X80 pipeline at reverse fault crossings was proposed. In general, reverse faults encountered by pipelines are involved in 3D oblique reverse faults, which can be considered as a combination of reverse fault and strike-slip fault. So a compressive strain demand estimation procedure for X80 pipeline crossing oblique-reverse faults was proposed by combining the presented semi-empirical model and the previous one for compression strike-slip fault (Liu 2016). Accuracy and efficiency of this proposed method was validated by fifteen design cases faced by the Second West to East Gas pipeline. The proposed method can be directly applied to the strain based design of X80 steel pipeline crossing oblique-reverse faults, with much higher efficiency than common numerical models.

• 한국토양비료학회지
• /
• 제9권3호
• /
• pp.201-210
• /
• 1976

Only 22.7% of total land area is arable land in Korea, it is anticipated that the increased land utilization of present arable land and enlargement of arable land through the reclamation of hillside and tidal land will be of great importance for the support of increased population in the future. Followings are the prediction of increased land utilization ratios, increased arable land through the reclamation of hillside and tidal land, and the increase] in fertilizer demand up to the year of 2000. 1. On the assumption that irrigation facilities, farm mechanization, and cropping systems would be improved remarkably by the year of 2000, the land utilization ratios of paddy land and upland are estimated to be 179% and 193% respectively. 2. Increments of fertilizer demand due to increased land utilization ratios, are estimated to be 2, 290 M/T in 1980, 70, 611 M/T in 1990, and 153, 619 M/T in 2000, when the amounts of fertilizers per unit area are fixed at present lrevels. 3. Increments of fertilizer demand due to the expansion of arable land through the reclamation of 516,330 ha of hillside land and 160,568 ha of tidal land, which are the present estimation of the reclaimable areas, are estimated as 32,960 M/T in 1980, 136,320 M/T in 1990, and 366,861 M/T in 2000. 4. Total increments of fertilizer demand due to the increased land utilization of arable land and the expansion of arable land through the reclamation of hillside and tidal lands in 2000's are estimated as 196,285 M/T for N, 147,351 M/T for $P_2O_5$, and 176,844 M/T for $K_2O$.

• 응용통계연구
• /
• 제32권5호
• /
• pp.703-720
• /
• 2019

최근 빈번하게 발생하는 이상기온과 기후변화로 인하여 전력수요의 변동성이 커지고 있으며 기온 영향의 증가와 함께 기온변화에 대한 전력수요의 반응은 비선형성과 비대칭성으로 나타나고 있다. 정부 에너지 정책의 변화와 4차 산업혁명의 전개에 따라 기온 효과를 보다 정확하게 추정하고 예측하는 것은 안정적 전력수급 관리를 위하여 중요한 과제이다. 본 연구는 기온변화에 대한 전력수요의 비선형적 반응에 대하여 부분선형모형을 이용하여 분석하고자 한다. 기온변화와 전력수요의 비선형·비대칭적 관계를 측정하기 위하여 Robinson의 double residual 준모수적 추정과 스플라인 추정을 적용하였다. 기상변수와 전력 소비에 대한 시간 단위 고주기 자료를 사용하여 부분선형모형으로 추정한 기온변화와 전력 소비의 관계는 기존 모수적 모형과는 다른 비선형성과 비대칭성을 갖고 있음을 확인하였다. 부분선형모형을 이용하여 얻은 전력수요에 대한 표본내·표본외 예측은 이차함수 모형과 냉난방도일 모형과 비교하여 우수한 예측력을 보였다. Diebold-Mariano 검정결과, 부분선형모형에서 얻은 예측력 향상은 통계적으로 유의하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.320-328
• /
• 2011

The down town passage segment which follows in the straight line which follows recently in high speed of the railway and rail construction is increasing. Also according to quality of life improvement of the citizens whom follows in national income increase the resident demand only becomes larger day by day about a environmental creation which is comfortable and house environmental etc. Demand of the citizens is not the problem of today yesterday about like this railway mean of transportation and with the fact that continuously will increase in future. This study is to predict and reduce railway noise from the conventional PSC-beam bridges which passes through urban areas under the government strateges of speed and weight increases of railway. The purpose of this study is to recommend a proper noise prediction method for designing pleasant roadside environments. The railway design including existing line reconstructions should minimize curved alignment to increase train speed to 180~200km/hr under the government's long-term planing such as the 4th Comprehensive National Development Plan (2000~2020), National Intermodal Transportation Plan (2000~2019) and National Railroad Network Establishment Plan (2006~2015), Since the PSC-beam bridges are mainly used for bridge structures urban areas, noise measurements were performed and analyzed to recommend the noise prediction methods for each type and speed of train respectively.

• International journal of advanced smart convergence
• /
• 제10권4호
• /
• pp.104-109
• /
• 2021

In the aftermath of the global pandemic that started in 2019, there have been many changes in the import/export and supply/demand process of agricultural products in each country. Amid these changes, the necessity and importance of each country's food self-sufficiency rate is increasing. There are several conditions that must accompany efficient agricultural activities, but among them, temperature is by far one of the most important conditions. For this reason, the need for high-accuracy climate data for stable agricultural activities is increasing, and various studies on climate prediction are being conducted in Korea, but data that can visually confirm climate prediction data for farmers are insufficient. Therefore, in this paper, we propose an artificial intelligence-based temperature prediction algorithm that can predict future temperature information by collecting and analyzing temperature data of farms in Gyeonggi-do in Korea for the last 10 years. If this algorithm is used, it is expected that it can be used as an auxiliary data for agricultural activities.