• 전기학회논문지P
• /
• 제64권4호
• /
• pp.199-206
• /
• 2015

A rising attention is paid to the railway system in many countries. KOREA is also of the opinion that the railway has to play a more important role in the near future to face up to the problems that increase gradually in the transport sector. To attract more traffic to the rail networks, it is important for rail modes to have running time competitiveness. Tilting trains, where it is possible to tilt the car-body towards the center of the curve, are a less expensive alternative to shorten travelling times on existing lines. Running time for tilting train is one of the most important factors, with which passenger demand forecasting or economic feasibility analysis will be done. This paper evaluates the speed limitation of tilting train around curves and also presents calculation process of its simulated possible running time. Then the adequacy of estimated time is verified with running time for Korean protype tilting train TTX (Tilting Train eXpress) by actual test run. As a case study, the estimated running time for the production version of tilting train and its time saving are presented compared with 2012's conventional Saemaul trains and non-tilting trains on the Gyeongbu line in the Korean rail network.

• 노동경제논집
• /
• 제33권3호
• /
• pp.47-88
• /
• 2010

정부는 2001년 산전후휴가 기간 확대와 산전후휴가와 육아휴직 기간 동안의 보조금 지급을 골자로 하는 모성보호법 개정을 단행하였다. 본 연구는 삼중차감기법을 통해 가임기 여성을 위한 이러한 추가 혜택이 가임기 여성의 고용과 시간당 임금에 미친 영향을 분석한다. 젊은 남성, 나이든 여성, 나이든 남성을 통제집단으로 간주하였을 때, 모성보호법 개정으로 인한 가임기 여성의 고용과 시간당 임금 변화는 없었다. 이는 모성보호법 개정이 가임기 여성의 노동공급과 기업의 가임기 여성에 대한 노동수요에 어떠한 변화도 초래하지 않았음을 의미한다.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.145-151
• /
• 2014

Recently, the growing demand for weight reduction and improved structure durabilityfor commercial vehicles has led to active research into the development and application of suitablecomposite materials. This studysuggests abimaterial composite frame produced by apultrusion process to replace steel frames. We focused on the development of a composite frameconsisting of two types of materialsby mixing anorthotropic material with anisotropic material. The inside layer consisted of an aluminum pipe, and the outside layer was composed of a glass fiber pipe. To determine the strength and failure mechanisms of the composite material, tensile tests, shear tests, and three-point bending tests were conducted, followed by fatigue tests. After static testing, the fatigue tests were conducted at a load frequency of 5 Hz, a stress ratio (R) of 0.1, and an endurance limit of $10^6$ for the S-N curve. The resultsshowed that the failure modes were related to both the core design and the laminating conditions.

• Structural Engineering and Mechanics
• /
• 제31권3호
• /
• pp.265-276
• /
• 2009

Various Pushover analysis methodologies have evolved as an easy as well as designers-friendly alternative of nonlinear dynamic analysis for estimation of the inelastic demands of structures under seismic loading for performance based design. In fact, the established nonlinear dynamic analysis to assess the same, demands considerable analytical and computational background and rigor as well as intuitive insight into inelastic behavior for judging suitability of the results and its interpretation and hence may not be used in design office for frequent practice. In this context, the simple and viable alternative of Pushover analysis methodologies can be accepted if its efficacy is thoroughly judged over all possible varieties of the problems. Though this burning issue has invited some research efforts in this direction, still a complete picture evolving very clear guidelines for use of these alternate methodologies require much more detailed studies, providing idea about how the accuracy is influenced due to various combinations of basic parameters regulating inelastic dynamic response of the structures. The limited study presented in the paper aims to achieve this end to the extent possible. The study intends to identify the range of applicability of the technique and compares the efficacy of various alternative Pushover analysis schemes to general class of problems. Thus, the paper may prove useful in judicial use of Pushover analysis methodologies for performance based design with reasonable accuracy and relative ease.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.656-658
• /
• 2013

새로운 공정 기술의 발달로, 임베디드 시스템을 구성하는 하드웨어와 소프트웨어의 복잡도는 나날이 증가하고 있다. 그 결과로, 현대의 복잡한 반도체 디자인을 전통적인 HDL을 사용한 방식으로 수행한다는 일은 점점 어려워지고 있다. 본 고에서는 SystemVerilog를 기반으로 하는 새로운 시스템 수준의 설계 방식을 적용하여 실제 회로에 구현한다. 기존에 구현한 타원곡선 암호화 엔진을 재사용하여, 시스템 레벨에서 객체 지향 개념을 살려 추상화하고, 이를 이용하여 타원곡선 암호화 서버 팜을 구현한다. 전체 시스템을 하나의 통합 설계 환경에서 성공적으로 구현하여 불필요한 노력과 시간을 50%로 축소하였다. 기존 방법으로 했다면, 하드웨어 설계에 Verilog, 시뮬레이션에 C/SystemC를 사용하여 설계와 검증에 여러 단계의 시간과 노력이 필요했을 것이다.

• 마이크로전자및패키징학회지
• /
• 제24권2호
• /
• pp.1-9
• /
• 2017

Recently, there has been a continuous researches on solders having sophisticated and improved performance due to demand for high-density and miniaturization of electronics, and development of solder for automotive electronics which can be used in harsh environment. When developing a new solder alloy, there is a wettability of solder on substrate for things to consider, and the wetting balance test is one of the methods for measuring that one. In this paper, the wetting balance test is introduced, and the calculus of the surface tension of solder and the contact angle between solder and substrate using wetting curve obtained is introduced too. In detail, the principle and test method of the wetting balance test, the introduction of the parameters with important meaning in the wetting curve, the method of calculating the contact angle as well as the surface tension of the solder using the shape of the solder meniscus.

• Earthquakes and Structures
• /
• 제22권1호
• /
• pp.15-23
• /
• 2022

One of the key tools in assessing the seismic vulnerability of the structures is the use of fragile functions, which is the possibility of damage from a particular damage surface for several levels of risk from the seismic movements of the earth. The aim of this study is to investigate the effect of two categories of earthquake events on the fragile curve (FRC) of the steel construction system. In this study, the relative lateral displacement of the structures is considered as a damage criterion. The limits set for modifying the relative lateral position in the HAZUS instruction are used to determine the failure modes, which include: slight, moderate, extensive and complete. The results show, as time strong-motion increases, the probability of exceeding (PoE) increases (for Peak ground acceleration (PGA) less than 0.5). The increase in seismic demand increases the probability of exceeding. In other words, it increases the probability of exceeding, if the maximum earthquake acceleration increases. Also, 7-storey model in extensive mode has 20 and 26.5% PoE larger than 5- and 3-storey models, respectively.

• 대한토목학회논문집
• /
• 제42권6호
• /
• pp.803-814
• /
• 2022

라오스 정부는 증가할 것으로 예상되는 전기 수요량을 충족하기 위해, 남능강 유역 내에 기존 8개소의 발전소 외에도 발전소 댐을 지속적으로 개발하고 있거나 기존 발전소의 발전 설비용량을 증설하고 있다. 이에 따라 라오스 정부는 발전소를 효율적으로 운영하기 위해 기존 저수지 운영규정 곡선(reservoir operation rule curve)을 갱신할 필요성을 제기하였다. 본 연구는 이를 위해 범용적인 동적 계획법(Dynamic Programming:DP) 프로그램인 CSUDP를 활용하여 발전소에서 생산되는 연간 발전량을 극대화하기 위해 현재의 단독 운영체계 외에 연계 운영체계도 검토하였다. 이의 결과로부터 적절한 운영규정 곡선 형태(URC/LRC, MRC)를 추출하였고, 이를 HEC-ResSim 프로그램의 저수지 운영 세트의 운영기초 자료로 입력하여 연간 발전량을 모의하였다. 모의된 연간 발전량과 기존의 운영규정 곡선, 운영실적, 그리고 현장 운영자의 의견 등을 종합하여, 대상 발전소의 연간 발전량을 최대화하는 최적의 저수지 운영규정 곡선(reservoir operation rule curve)을 개발하였다. 이 경우, 저수지를 연계하여 운영하는 체계가 저수지 단독의 운영체계보다 연계에 따른 시너지 효과로 약 2.5 %의 발전량을 더 생산하는 것으로 모의 되었다.

• Earthquakes and Structures
• /
• 제12권5호
• /
• pp.489-499
• /
• 2017

The effects of past earthquakes have demonstrated the seismic vulnerability of confined masonry structures (CMSs) to earthquakes. The results of experimental analysis indicate that damage to these structures depends on lateral displacement applied to the walls. Seismic evaluation lacks an analytical approach because of the complexity of the behavior of this type of structure; an empirical approach is often used for this purpose. Seismic assessment and risk analysis of CMSs, especially in area have a large number of such buildings is difficult and could be riddled with error. The present study used analytical and numerical models to develop a simplified nonlinear displacement-based approach for seismic assessment of a CMS. The methodology is based on the concept of ESDOF and displacement demand and is compared with displacement capacity at the characteristic period of vibration according to performance level. Displacement demand was identified using the nonlinear displacement spectrum for a specified limit state. This approach is based on a macro model and nonlinear incremental dynamic analysis of a 3D prototype structure taking into account uncertainty of the mechanical properties and results in a simple, precise method for seismic assessment of a CMS. To validate the approach, a case study was considered in the form of an analytical fragility curve which was then compared with the precise method.

• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.25-31
• /
• 2009

In this study, pollutant loads delivery ratio by flow duration in Hwangryoung A watershed was estimated. The delivery ratio was estimated with measured data by Ministry of Environment(MOE) and the regression equation based on geomorphic parameters. Eight day interval flow data measured by the MOE were converted to daily flow to calculate daily load and flow duration curve by correlating data of neighboring station which has daily flow data. Regression equation developed by previous study was tested to study watershed and found to be satisfactory. The delivery ratios estimated by two methods were compared. For the case of Biochemical oxygen demand(BOD), the delivery ratios of low flow condition were 7.6 and 15.5% by measured and regression equation, respectively. Also, the delivery ratios of Total phosphorus(T-P) for normal flow condition were 13.3 and 6.3% by measured and regression equation, respectively.