• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.201-204
• /
• 2002

This paper describes the hydrodynamic characteristics of a test-bed AUV SNUUV-I constructed at Seoul National University. The main purpose of the AUV is to carry out fundamental control and hydrodynamic experiments. Its configuration is basically a long cylinder of 1.35m in length and 0.25m in diameter with delta-type wings near its rear end. On the edge of each wing, a thruster of 1/4HP is mounted, which is used for both drive and turn the vehicle for horizontal movement as the output control power is varied. A pair of control surfaces installed near its font part generates pitch moments for vertical movement. The 6 DOF mathematical model of SNUUV-I contains hydrodynamic forces and moments expressed in terms of a set of hydrodynamic coefficients. These coefficients can be classified into linear damping coefficients, linear inertial coefficients and nonlinear damping coefficients. It is important to estimate the exact value of these coefficients to control the vehicle precisely. Among these, the linear coefficients are known to affect the motion of the vehicle dominantly. The linear damping coefficients are estimated by using Extended Kalman Filter. The responses of the vehicle to input signals are used to estimate the hydrodynamic coefficients, which can be inferred from output signals measured from an IMU (inertial motion unit) sensor, while the linear inertial coefficients are calculated by a potential code. By using these coefficients estimated as described above, a simulation program is constructed using Matlab.

• 한국의류학회지
• /
• 제20권1호
• /
• pp.228-238
• /
• 1996

The purpose of this study was to evaluate the effect of chacteristics of knit fabrics on the microclimate of the skin simulating system. To determine the effect of characteristics of knit fabrics, vapor state of sweat pulse was simulated in the closed system. Different contents of fibers such as cotton, wool and polyester with different yarn size and knit types were chosen for specimens. The changes of humidity and temperature of air layer in the simulated systems were measured. Buffering indices, $K_d$ and $\beta_r$, were determined by considering $\alpha_p, \DeltaP_{max}, t_{max}, and tan\beta$. Physical properties of knit fabrics such as thickness, porosity, air resistance and moisture vapor transport were measured. Results showed that vapor pressure of wool was lower than cotton or polyester This was attributed to the hydrophilicity of wool which absorbed moisture rather quickly and retained in the knit fabric. The time to decrease vapor pressure was faster for polyester than cotton or wool. As a result, $K_d$ was in the order of wool> polye, item> cotton. $\beta_r$ of wool was rower than cotton or polyester due to its lowers porosity and slower desorption rate. For the yarn size, $K_d$ was in the order of 80's> 60's> 30's; thinner and lighter yarn showed better water vapor transport property. For knit type, buffering capacity of single jersey was better than interlock knit fabric. Statistical analysis showed that the air permeability was the most influential factor far the water vapor transport properties.

• 한국잠사곤충학회지
• /
• 제35권2호
• /
• pp.120-128
• /
• 1993

B. t k HD-1 균주에 0.002% SDS와 0.5$\mu$g/ml EtBr을 처리한 결과, 9개의 cry- 변이균주를 분리하였으며 또한 B. t k HD-1균주와 B. cereus 569균주를 혼합배양하는 방법으로 mating 실험을 수행하여 B. t k HD-1으로부터 일부 plasmid가 전이된 11개의 cry+ B. cereus와 2개의 cry=B. cereus를 분리하고 plasmid수와 분자량을 조사하였다. B. t k HD-1의 경우 9개의 plasmid가 존재하였고 일부 plasmid가 curing된 B. t k HD-1변이균주의 경우 29Md plasmid나 44Md plasmid가 반드시 존재하였으나, cry- 변이균주에는 29Md 이상의 모든 plasmid가 소실되어 내독소 단백질 합성에 관여하는 유전자가 기억된 plamid를 결정하였다.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.153-165
• /
• 1995

The design procedure of a GaAs/AlGaAs semiconductor matrix optical switch is presented for a simplified tree architecture in the viewpoint of optical loss. A low loss, 0.537 dB/cm, pin type substrate is designed by considering the loss due to imputity doping at 1.3 $\mu$m wavelength. The operating voltage and the device length of a reversed ${\Delta}{\beta}$ electro-optic directional coupler(EODC) swith which is a cross-point device of the 4${\times}$4 matrix optical switch and the bending loss of rib waveguide are caculated as functions of waveguide parameters and bending parameters. There is an optimum bending radius for some waveguide parameters. It is recommened that higher optical confinement conditions such as wide waveguide width and higher rib-height should be chosen for structural parameters of a low loss and a process insensitive 4${\times}$4 matris optical switch. A 4${\times}$4 optical matrix switch which has a 3 dB loss and a 12 volt operating voltage is designed.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1351-1360
• /
• 1993

본 연구에서는 수적법(hand lay up : HLU)을 이용하여 단 섬유포(chopped strand mat : CSM)형태의 유리섬유를 불포화 폴리에스테르 수지에 강화시킨 복합 적층 판을 대상으로 해수중에서 굽힘·피로시험을 실시하여 피로균열 성장거동을 관찰하고 파면관찰을 통하여 GERP의 피로특성을 검토하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.301-306
• /
• 2014

We proposed a new PCB-type 'common-mode current($I_c$) and differential-mode current($I_d$) detector' working for fast detection of $I_c$ and $I_d$ from the differential-mode signaling, with miniaturization effect and possibility of cheaper fabrication. In order to realize this device, we suggest a branch-line-coupler balun having a composite right- and left-handed(CRLH) one-layer microstrip phase-shifting line as compact as roughly ${\lambda}_g/14$. The presented balun obviously is different from the conventional bent-&-folded delay lines or slits on the ground for coupling the lines on the top and bottom dielectrics. As we connect the suggested balun output ports of the differential-mode signal lines via the through-port named U and coupled-port named L, $I_c$ and $I_d$ will appear at port ${\Delta}$ and port ${\Sigma}$ of the present device, in order. The validity of the design scheme is verified by the circuit-and numerical electromagnetic analyses, and the dispersion curve proving the metamaterial characteristics of the geometry. Besides, the examples of the $I_c$ and $I_d$ indicator are observed as the even and odd modes in differential-mode signal feeding. Also, the proposed device is shown to be very compact, compared with the conventional structure.

• Journal of Biosystems Engineering
• /
• 제42권1호
• /
• pp.44-55
• /
• 2017

Background: Heat recovery is one of the prominent ways to save a considerable amount of conventional fossil fuel and minimize its adverse effects on the environment. The rotary heat exchanger is one of the most effective and efficient devices for heat recovery or heat exchanging purposes. It is a regenerative type of heat exchanger, which has been studied and used for many heat recovery purposes. However, regenerative thermal wheels have been mostly used as heat recovery systems in buildings. For modeling a rotary regenerator, it is very important to numerically consider all the factors involved, such as effectiveness, rotational speed, geometrical size and shape, and pressure drop (${\Delta}p$). In recent times, several researchers have actively studied the rotary heat exchangers, both theoretically and experimentally. Reviews: In this paper different advances in the numerical modeling of regenerative rotary heat exchangers in relation to fluid flow and heat transfer have been discussed. Researchers have indicated that the effectiveness of the regenerative rotary heat exchanger depends on various factors including, among many others, rotational speed, rotational period and combustion power. It is reported that with the increase of periodic rotation the deviation of theoretical results from the experimental result increases. The available literature indicates that regenerative heat exchangers are having relatively more effectiveness (60-80%), compared to other heat exchangers. It is also observed that the finite difference method and finite volume methods are mostly used for discretizing the heat transfer governing equations, under some assumptions. Research also indicates that for the effectiveness calculation the ${\varepsilon}-NTU$ method is the most popular and convenient.

• The Korean Journal of Physiology and Pharmacology
• /
• 제20권1호
• /
• pp.75-82
• /
• 2016

Paroxetine, a selective serotonin reuptake inhibitor (SSRI), has been reported to have an effect on several ion channels including human ether-a-go-go-related gene in a SSRI-independent manner. These results suggest that paroxetine may cause side effects on cardiac system. In this study, we investigated the effect of paroxetine on Kv1.5, which is one of cardiac ion channels. The action of paroxetine on the cloned neuronal rat Kv1.5 channels stably expressed in Chinese hamster ovary cells was investigated using the whole-cell patch-clamp technique. Paroxetine reduced Kv1.5 whole-cell currents in a reversible concentration-dependent manner, with an $IC_{50}$ value and a Hill coefficient of $4.11{\mu}M$ and 0.98, respectively. Paroxetine accelerated the decay rate of inactivation of Kv1.5 currents without modifying the kinetics of current activation. The inhibition increased steeply between -30 and 0 mV, which corresponded with the voltage range for channel opening. In the voltage range positive to 0 mV, inhibition displayed a weak voltage dependence, consistent with an electrical distance ${\delta}$ of 0.32. The binding ($k_{+1}$) and unbinding ($k_{-1}$) rate constants for paroxetine-induced block of Kv1.5 were $4.9{\mu}M^{-1}s^{-1}$ and $16.1s^{-1}$, respectively. The theoretical $K_D$ value derived by $k_{-1}/k_{+1}$ yielded $3.3{\mu}M$. Paroxetine slowed the deactivation time course, resulting in a tail crossover phenomenon when the tail currents, recorded in the presence and absence of paroxetine, were superimposed. Inhibition of Kv1.5 by paroxetine was use-dependent. The present results suggest that paroxetine acts on Kv1.5 currents as an open-channel blocker.

• Progress in Superconductivity
• /
• 제1권1호
• /
• pp.1-8
• /
• 1999

The magnetization and/or resistivity of high $T_c$ superconductors ($YBa_2Cu_3O_{7-\delta}$(YBCO) single crystal, $Bi_2Sr_2CaCu_2O_8$ (Bi-2212) single crystal, $Tl_2Ba_2CaCu_2O_8$ (Tl-2212) film, $HgBa_2Ca_2Cu_3O_8$ (Hg-1223) film) have been measured as a function of magnetic field H and temperature T. The extracted fluctuation part of the magnetization and conductivity exhibits a critical behavior consistent with the three-dimensional XY model. The dynamic critical exponent z does not sensitively vary with a type of the superconductors. The value of z ranges from 1.5 to $1.8{\pm}0.1$. However, the static critical exponent ${\nu}$ is the most largely increased in Tl-2212 that has a weaker interlayer coupling strength than YBCO; the value of ${\nu}$ is 0.669, 0.909, 1.19, and 1.338 for YBCO, Bi-2212, Hg-1223, and Tl-2212 respectively. The results indicate that the weak interlayer coupling along the c-axis of high $T_c$ superconductors near $T_c$ does not influence the dynamic critical exponent z (the same value of superfluid $^4He$), but significantly increases the static critical exponent ${\nu}$.

• 한국식품영양학회지
• /
• 제33권5호
• /
• pp.576-583
• /
• 2020

The purpose of this study was to compare the quality characteristics of silken tofu products from the commercial market in Korea. Seven types of commercial silken tofu were sampled and their physicochemical properties, including soluble solid contents, salinity, pH, total acidity, moisture contents (total solid contents), crude protein and fat contents were evaluated. The TPA results suggest that the texture of silken tofu was very different from one another according to the type of and the amount of coagulant. The commercial silken tofu showed a range of pH 5.53~6.48, total acidity of 0.12~0.32%, soluble solid contents of 2.62~5.07 °Brix, salinity of 2.28~4.30%, and moisture contents of 87.10~92.24%, respectively. In terms of the coagulant of tofu, besides the GDL (glucono-δ- lactone), other coagulants such as MgCl₂ for making 'silken tofu' in the Korean tofu market. The quality characteristics differed depending on the constituents of sample and the coagulants of tofu used. These results are expected to be useful in identifying new trends in the domestic silken tofu industry.