• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.1
• /
• pp.11-36
• /
• 2021

The solar annual (Sa) and semiannual (Ssa) tides account for much of the non-uniform annual and seasonal variability observed in sea levels. These non-equilibrium tides depend on atmospheric variations, forced by changes in the Sun's distance and declination, as well as on hydrographic conditions. Here we employ tidal harmonic analyses to calculate Sa and Ssa harmonic constants for 21 Korean coastal tidal stations (TS), operated by the Korea Hydrographic and Oceanographic Agency. We used 19 year-long (1999 to 2017) 1 hr-interval sea level records from each site, and used two conventional harmonic analysis (HA) programs (Task2K and UTide). The stability of Sa harmonic constants was estimated with respect to starting date and record length of the data, and we examined the spatial distribution of the calculated Sa and Ssa harmonic constants. HA was performed on Incheon TS (ITS) records using 369-day subsets; the first start date was January 1, 1999, the subsequent data subset starting 24 hours later, and so on up until the final start date was December 27, 2017. Variations in the Sa constants produced by the two HA packages had similar magnitudes and start date sensitivity. Results from the two HA packages had a large difference in phase lag (about 78°) but relatively small amplitude (<1 cm) difference. The phase lag difference occurred in large part since Task2K excludes the perihelion astronomical variable. Sensitivity of the ITS Sa constants to data record length (i.e., 1, 2, 3, 5, 9, and 19 years) was also tested to determine the data length needed to yield stable Sa results. HA results revealed that 5 to 9 year sea level records could estimate Sa harmonic constants with relatively small error, while the best results are produced using 19 year-long records. As noted earlier, Sa amplitudes vary with regional hydrographic and atmospheric conditions. Sa amplitudes at the twenty one TS ranged from 15.0 to 18.6 cm, 10.7 to 17.5 cm, and 10.5 to 13.0 cm, along the west coast, south coast including Jejudo, and east coast including Ulleungdo, respectively. Except at Ulleungdo, it was found that the Ssa constituent contributes to produce asymmetric seasonal sea level variation and it delays (hastens) the highest (lowest) sea levels. Comparisons between monthly mean, air-pressure adjusted, and steric sea level variations revealed that year-to-year and asymmetric seasonal variations in sea levels were largely produced by steric sea level variation and inverted barometer effect.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.603-620
• /
• 2021

A land nodal seismic system was employed to acquire seismic reflection data using stand-alone cable-free receivers in a land-river area. Acquiring reliable data using this technology is very cost effective, as it avoids topographic problems in the deployment and collection of receivers. The land nodal airgun system deployed on the mouth of the Hyungsan River (in Pohang, Gyeongsangbuk Province) used airgun sources in the river and receivers on the riverbank, with subparallel source and receiver lines, approximately 120 m-spaced. Seismic data collected on the riverbank are characterized by a low signal-to-noise (S/N) and inconsistent reflection events. Most of the events are represented by hyperbola in the field records, including direct waves, guided waves, air waves, and Scholte surface waves, in contrast to the straight lines in the data collected conventionally where source and receiver lines are coincident. The processing strategy included enhancing the signal behind the low-frequency large-amplitude noise with a cascaded application of bandpass and f-k filters for the attenuation of air waves. Static time delays caused by the cross-offset distance between sources and receivers are corrected, with a focus on mapping the shallow reflections obscured by guided wave and air wave noise. A new time-distance equation and curve for direct and air waves are suggested for the correction of the static time delay caused by the cross-offset between source and receiver. Investigation of the minimum cross-offset gathers shows well-aligned shallow reflections around 200 ms after time-shift correction. This time-delay static correction based on the direct wave is found essential to improving the data from parallel source and receiver lines. Data acquisition and processing strategies developed in this study for land nodal airgun seismic systems will be readily applicable to seismic data from land-sea areas when high-resolution signal data becomes available in the future for investigation of shallow gas reservoirs, faults, and engineering designs for the development of coastal areas.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.73-82
• /
• 2009

Due to the many advantages including low price, low power consumption, and miniaturization, the CMOS camera has been utilized in many applications, including mobile phones, the automotive industry, medical sciences and sensoring, robotic controls, and research in the security field. In particular, the 360 degree omni-directional camera when utilized in multi-camera applications has displayed issues of software nature, interface communication management, delays, and a complicated image display control. Other issues include energy management problems, and miniaturization of a multi-camera in the hardware field. Traditional CMOS camera systems are comprised of an embedded system that consists of a high-performance MCU enabling a camera to send and receive images and a multi-layer system similar to an individual control system that consists of the camera's high performance Micro Controller Unit. We proposed the SL-AVS (Small Size/Low power Around-View System) to be able to control a camera while collecting image data using a high speed synchronization technique on the foundation of a single layer low performance MCU. It is an initial model of the omni-directional camera that takes images from a 360 view drawing from several CMOS camera utilizing a 110 degree view. We then connected a single MCU with four low-power CMOS cameras and implemented controls that include synchronization, controlling, and transmit/receive functions of individual camera compared with the traditional system. The synchronization of the respective cameras were controlled and then memorized by handling each interrupt through the MCU. We were able to improve the efficiency of data transmission that minimizes re-synchronization amongst a target, the CMOS camera, and the MCU. Further, depending on the choice of users, respective or groups of images divided into 4 domains were then provided with a target. We finally analyzed and compared the performance of the developed camera system including the synchronization and time of data transfer and image data loss, etc.

• Journal of Korean Philosophical Society
• /
• v.115
• /
• pp.249-279
• /
• 2010

The Law of the Heart, which appears in the chapter "B. The Actualization of Rational Self-consciousness Through its own Activity" in Hegel's Phenomenology of Spirit represents that the self-certainty of the reason may be the another face of the Madness. The Reason's indubitable certainty is the testimony of the truth for Descartes, and it also plays a role as the moral maxim of the conscience for Kant. But this subjective certainty unavoidably leads to the Madness of self-conceit, which unifies the consciousness and the reality ignoring the difference between them. The typical attitude appearing in the reformer like Don Quixote and also romantic idealists reveals the fact that modern reason and the psychosis can be both faces of one and the same coin. The Mirror Stage, the Imaginary, and the Formula of the Desire in Lacan's Theory shows that the Image of completeness is the result of Mis-understanding. Even if the Mirror stage is necessary for the Formation of the subject, at the same time it should also lead to the next stage, i.e., the Symbolic Order. It is considered as the realm of the Otherness, which refers to the realm of language or that of law. If the Ego can't go through the symbolic castration acted on by the Name of the Father, he will be remained in the prison of the Imaginary. The Madness also shows the similar process. For Hegel the Discipline of the Labor or the Death as absolute Otherness that inevitably delays the Desire plays the same role as the name of Father. It may be the experience of Separation or that of Sublation of the individual towards the universal, which is equivalent to the experience of Symbolic castration in Lacan. Furthermore there may be the difference between Hegel and Lacan as the following; while in Hegel the experience of Separation is founded on the spontaneity of the Spirit, for Lacan it is to be compelled and structured by the absolute Other.

• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.285-292
• /
• 2009

It has been observed that, after long term storage, some ammunitions are misfired by tamping (combustionstopping) due to aging of the chemicals loaded in the ammunitions. Used in ammunitions are percussion powder which provides the initial energy, igniter which ignites the percussion powder, and a delay system that delays the combustion for a period of time. The percussion powder is loaded first, followed by the igniter and then the delay system, and the ammunitions explode by the energy being transferred in the same order. Tamping occurs by combustion-stopping of the igniter or insufficient energy transfer from the igniter to the delay system or the combustion-stopping of the delay system, which are suspected to be caused by low purity of the components, inappropriate mixing ratio, size distribution of particulate components, type of the binder, blending method, hydrolysis by the humidity penetrated during the long term storage, and chemical changes of the components by high temperature. Goal of this study is to find the causes of the combustion-stopping of the igniter and the delay system of the ammunitions after long term storage. In this study, a method was developed for testing of the combustion-stopping, and the size distributions of the particulate components were analyzed with field-flow fractionation (FFF), and then the mechanism of chemical change during long term storage was investigated by thermal analysis (differential scanning calorimetry), XRD (X-ray diffractometry), and XPS (X-ray photoelectron spectroscopy). For the ignition system, M (metal)-O (oxygen) and M-OH peaks were observed at the oxygen's 1s position in the XPS spectrum. It was also found by XRD that $Fe_3O_4$ was produced. Thus it can be concluded that the combustion-stopping is caused by reduction in energy due to oxidation of the igniter.

• KDI Journal of Economic Policy
• /
• v.13 no.1
• /
• pp.3-33
• /
• 1991

Since the early 1980's, the Korean government has gradually been widening the Korean market to foreign consumer goods. This, combined with the increased purchasing power of the Korean consumers resulting from the continued economic growth of the country, has sparked a spectacular influx of foreign consumer goods into Korea, ranging from BMW's to chopsticks. Import of foreign consumer goods amounted to more than 6 billion dollars in 1989 and is continuing to grow at a rapid rate. The increased import of foreign consumer goods doubtlessly improved the overall welfare of the Korean consumers by providing them with a wider range of options to choose from, by lowering the prices of some of the consumer goods domestically produced, and also by forcing the producers of some Korean goods to face competition with better foreign goods, thus giving them an incentive to raise the quality of their products. However, it is agreed by most economists that this increase in general welfare has been much smaller than what they had expected at the outset. Consumer prices of most imported consumer goods are easily double the import price, and in some cases, more than treble the import prices. Further, there has not been a noticeable drop in the prices of domestically produced consumer goods. Much of the blame has been attributed to the distribution sector of Korea. The objective of this paper is to analyze the imported consumer goods distribution sector of Korea, focusing on the possible sources of the poor performance of that sector, and to make policy suggestions that could potentially increase the welfare. This paper differs from all the previous research by others on this subject in that it analyzes the imported consumer goods distribution sector of Korea as a vertical structure. The distribution sector of an imported consumer good is a vertical structure since it consists of an international market, an import stage, and domestic wholesale and retail markets, in that order vertically. Our study naturally includes the analysis of the vertical restraints as well as the analysis of the industrial organization of each horizontal stage in the vertical structure. Each horizontal component of the imported consumer goods distribution sector is basically a monopolistically competitive market differentiated by characteristics of goods and by the locations and the services of firms. Further, restrictive dealership and resale price maintenance are found to be widely in use. Our main findings are the follwing; First, most consumer goods are imported monopolistically or oligopolistically through restrictive dealership contracts between foreign producers and domestic importers. Such restrictive dealership gives importers market power in the domestic market and explains many of the large discrepancies betwen the consumer prices and the import prices of many goods. Korean anti - trust law does not cover the issues arising from the market power of an importer resulting from a restrictive dealership contract. Second, some major producers of Korean goods are also importers of foreign goods that are substitutes of their products. The import of substitutes by major domestic producers is anti - competitive because it tends to raise the prices of both domestic goods and foreign goods, and also because it reduces the incentive of the domestic producers to raise the quality of their products. Third, wholesalers and retailers widely use resale price maintenance as a price fixing mechanism, and while this is against the anti- trust law, it seldom gets noticed. Fourth, the high level of rents of real estate for commercial use works as an entry barrier to the distribution sector and results in reduced competition by the firms in that sector. Finally, there are information problems. Consumers have inferior information to firms about the quality of a foreign consumer good that they have not tried before. Such information asymmetry often enables firms to raise prices. In addition, information asymmetry between importers frequently delays the import of cheaper substitutes. In order to alleviate the problems indentified above, we suggest the following policy changes. The government should strengthen the anti - trust law and its enforcement to regulate restrictive import contracts, import of competing goods by major domestic producers, and RPM by wholesalers and retailers that is aimed at price fixing. In addition, the government should loosen its tight real estate policy to encourage investment in the distribution sector. Finally, we suggest that the import price revelation policy that has been in use for some items since 1990 be expanded to most imported consumer goods that are introduced for the first time to give consumer better information and be used only for the period of time needed to inform sufficient number of consumers.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.3
• /
• pp.323-331
• /
• 2000

Purpose: Brain metastases are present in approximately 10-16% of small cell lung cancer patients at diagnosis. Brain metastasis is an important clinical problem associated with increasing the survival rate, with a cumulative incidence of up to 80% in patients surviving 2 years. Prophylactic cranial irradiation(PCI) reduces the incidence of brain matastasis and may prolong survival in patients with limited small-cell lung cancer who achieved complete remission. This study was performed to analyze the incidence of brain metastasis, survival and clinical aspects after PCI in patients with limited small-cell lung cancer who achieved complete remission. Methods : Between 1989 and 1999, forty-two patients with limited small-cell lung cancer who achived achieved complete remission after therapy were enrolled into this study retrospectively. All patients received etoposide and cisplatin(VPP) alternating with cytoxan, adriamycin, and vincristine(CAV) every 3 weeks for at least 6 cycles initially. All patients received thoracic radiotherapy: concurrent(38.1%) and sequential(61.9%). All patients received late PCI. Results : Most patients(88.1%) were men, and the median age was 58 years. The median follow-up duration was 18.1 months. During the follow-up period, 57.1% of the patients developed relapse. The most frequent site of relapse was chest(35.7%), followed by brain(14.3%), liver(11.9%), adrenal gland(44%), and bone(2.2%). With the Kaplan-Meier method, the average disease-free interval was 1,090 days(median 305 days). The average time to development of brain relapse after PCI and other sites relapse(except brain) were 2,548 days and 1,395 days(median 460 days), respectively. The average overall survival was 1,233 days(median 634 days, 21.1 months), and 2-year survival rates was 41.7%. The average overall survival in the relapse group was 642 days(median 489 days) and in the no relapse group was 2,622 days(p<0.001). The average overall survival in the brain relapse group was 928 days(median 822 days) and in the no brain relapse group was 1,308 days(median 634 days)(p=0.772). In most patients(85.7%), relapse(except brain) or systemic disease was the usual cause of death. Brain matastasis was the cause of death in 14.3% of the cases. Conclusions : We may conclude that PCI reduces and delays brain metastasis in patients with limited small cell lung cancer who achieved complete remission. We found decreased survival in relapse group but, no significant survival difference was noted according to brain matastasis. And relapse(except brain) or systemic disease was the usual cause of death. In order to increase survival, new treatment strategies for control methods for relapse and systemic disease are required.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3225-3262
• /
• 1974

The purposes of this thesis are to clarify experimentally the variation of ground water temperature in tube wells during the irrigation period of paddy rice, and the effect of ground water irrigation on the growth, grain yield and yield components of the rice plant, and, furthermore, when and why the plant is most liable to be damaged by ground water, and also to find out the effective ground water irrigation methods. The results obtained in this experiment are as follows; 1. The temperature of ground water in tube wells varies according to the location, year, and the depth of the well. The average temperatures of ground water in a tubewells, 6.3m, 8.0m deep are $14.5^{\circ}C$ and $13.1^{\circ}C$, respercively, during the irrigation period of paddy rice (From the middle of June to the end of September). In the former the temperature rises continuously from $12.3^{\circ}C$ to 16.4$^{\circ}C$ and in the latter from $12.4^{\circ}C$ to $13.8^{\circ}C$ during the same period. These temperatures are approximately the same value as the estimated temperatures. The temperature difference between the ground water and the surface water is approximately $11^{\circ}C$. 2. The results obtained from the analysis of the water quality of the "Seoho" reservoir and that of water from the tube well show that the pH values of the ground water and the surface water are 6.35 and 6.00, respectively, and inorganic components such as N, PO4, Na, Cl, SiO2 and Ca are contained more in the ground water than in the surface water while K, SO4, Fe and Mg are contained less in the ground water. 3. The response of growth, yield and yield components of paddy rice to ground water irrigation are as follows; (l) Using ground water irrigation during the watered rice nursery period(seeding date: 30 April, 1970), the chracteristics of a young rice plant, such as plant height, number of leaves, and number of tillers are inferior to those of young rice plants irrigated with surface water during the same period. (2) In cases where ground water and surface water are supplied separately by the gravity flow method, it is found that ground water irrigation to the rice plant delays the stage at which there is a maximum increase in the number of tillers by 6 days. (3) At the tillering stage of rice plant just after transplanting, the effect of ground water irrigation on the increase in the number of tillers is better, compared with the method of supplying surface water throughout the whole irrigation period. Conversely, the number of tillers is decreased by ground water irrigation at the reproductive stage. Plant height is extremely restrained by ground water irrigation. (4) Heading date is clearly delayed by the ground water irrigation when it is practised during the growth stages or at the reproductive stage only. (5) The heading date of rice plants is slightly delayed by irrigation with the gravity flow method as compared with the standing water method. (6) The response of yield and of yield components of rice to ground water irrigation are as follows: \circled1 When ground water irrigation is practised during the growth stages and the reproductive stage, the culm length of the rice plant is reduced by 11 percent and 8 percent, respectively, when compared with the surface water irrigation used throughout all the growth stages. \circled2 Panicle length is found to be the longest on the test plot in which ground water irrigation is practised at the tillering stage. A similar tendency as that seen in the culm length is observed on other test plots. \circled3 The number of panicles is found to be the least on the plot in which ground water irrigation is practised by the gravity flow method throughout all the growth stages of the rice plant. No significant difference is found between the other plots. \circled4 The number of spikelets per panicle at the various stages of rice growth at which_ surface or ground water is supplied by gravity flow method are as follows; surface water at all growth stages‥‥‥‥‥ 98.5. Ground water at all growth stages‥‥‥‥‥‥62.2 Ground water at the tillering stage‥‥‥‥‥ 82.6. Ground water at the reproductive stage ‥‥‥‥‥ 74.1. \circled5 Ripening percentage is about 70 percent on the test plot in which ground water irrigation is practised during all the growth stages and at the tillering stage only. However, when ground water irrigation is practised, at the reproductive stage, the ripening percentage is reduced to 50 percent. This means that 20 percent reduction in the ripening percentage by using ground water irrigation at the reproductive stage. \circled6 The weight of 1,000 kernels is found to show a similar tendency as in the case of ripening percentage i. e. the ground water irrigation during all the growth stages and at the reproductive stage results in a decreased weight of the 1,000 kernels. \circled7 The yield of brown rice from the various treatments are as follows; Gravity flow; Surface water at all growth stages‥‥‥‥‥‥514kg/10a. Ground water at all growth stages‥‥‥‥‥‥428kg/10a. Ground water at the reproductive stage‥‥‥‥‥‥430kg/10a. Standing water; Surface water at all growh stages‥‥‥‥‥‥556kg/10a. Ground water at all growth stages‥‥‥‥‥‥441kg/10a. Ground water at the reproductive stage‥‥‥‥‥‥450kg/10a. The above figures show that ground water irrigation by the gravity flow and by the standing water method during all the growth stages resulted in an 18 percent and a 21 percent decrease in the yield of brown rice, respectively, when compared with surface water irrigation. Also ground water irrigation by gravity flow and by standing water resulted in respective decreases in yield of 16 percent and 19 percent, compared with the surface irrigation method. 4. Results obtained from the experiments on the improvement of ground water irrigation efficiency to paddy rice are as follows; (1) When the standing water irrigation with surface water is practised, the daily average water temperature in a paddy field is 25.2$^{\circ}C$, but, when the gravity flow method is practised with the same irrigation water, the daily average water temperature is 24.5$^{\circ}C$. This means that the former is 0.7$^{\circ}C$ higher than the latter. On the other hand, when ground water is used, the daily water temperatures in a paddy field are respectively 21.$0^{\circ}C$ and 19.3$^{\circ}C$ by practising standing water and the gravity flow method. It can be seen that the former is approximately 1.$0^{\circ}C$ higher than the latter. (2) When the non-water-logged cultivation is practised, the yield of brown rice is 516.3kg/10a, while the yield of brown rice from ground water irrigation plot throughout the whole irrigation period and surface water irrigation plot are 446.3kg/10a and 556.4kg/10a, respectivelely. This means that there is no significant difference in yields between surface water irrigation practice and non-water-logged cultivation, and also means that non-water-logged cultivation results in a 12.6 percent increase in yield compared with the yield from the ground water irrigation plot. (3) The black and white coloring on the inside surface of the water warming ponds has no substantial effect on the temperature of the water. The average daily water temperatures of the various water warming ponds, having different depths, are expressed as Y=aX+b, while the daily average water temperatures at various depths in a water warming pond are expressed as Y=a(b)x (where Y: the daily average water temperature, a,b: constants depending on the type of water warming pond, X; water depth). As the depth of water warning pond is increased, the diurnal difference of the highest and the lowest water temperature is decreased, and also, the time at which the highest water temperature occurs, is delayed. (4) The degree of warming by using a polyethylene tube, 100m in length and 10cm in diameter, is 4~9$^{\circ}C$. Heat exchange rate of a polyethylene tube is 1.5 times higher than that or a water warming channel. The following equation expresses the water warming mechanism of a polyethylene tube where distance from the tube inlet, time in day and several climatic factors are given: {{{{ theta omega (dwt)= { a}_{0 } (1-e- { x} over { PHI v })+ { 2} atop { SUM from { { n}=1} { { a}_{n } } over { SQRT { 1+ {( n omega PHI) }^{2 } } } } LEFT { sin(n omega t+ { b}_{n }+ { tan}^{-1 }n omega PHI )-e- { x} over { PHI v }sin(n omega LEFT ( t- { x} over {v } RIGHT ) + { b}_{n }+ { tan}^{-1 }n omega PHI ) RIGHT } +e- { x} over { PHI v } theta i}}}}{{{{ { theta }_{$\infty$ }(t)= { { alpha theta }_{a }+ { theta }_{ w'} +(S- { B}_{s } ) { U}_{w } } over { beta } , PHI = { { cpDU}_{ omega } } over {4 beta } }}}} where $\theta$$\omega$; discharged water temperature($^{\circ}C$) $\theta$a; air temperature ($^{\circ}C$) $\theta$$\omega$';ponded water temperature($^{\circ}C$) s ; net solar radiation(ly/min) t ; time(tadian) x; tube length(cm) D; diameter(cm) ao,an,bn;constants determined from $\theta$$\omega$(t) varitation. cp; heat capacity of water(cal/$^{\circ}C$ ㎥) U,Ua; overall heat transfer coefficient(cal/$^{\circ}C$ $\textrm{cm}^2$ min-1) $\omega$;1 velocity of water in a polyethylene tube(cm/min) Bs ; heat exchange rate between water and soil(ly/min)