• International Journal of Advanced Culture Technology
• /
• 제6권3호
• /
• pp.151-162
• /
• 2018

In deriving the economic order quantity (EOQ) formula, it is tacitly assumed that the buyer has to pay product price while receiving the product from the supplier. However, as a marketing policy, some suppliers permit a delay in payments to the buyers to increase demand for the product they made. Credit transactions would have a positive effect on both suppliers and buyers. For a supplier who offers trade credit, it is an effective means of price differentiation to increase the demand for the product. Availability of opportunity to delay the payment in buyer effectively reduces the cost of holding stocks and therefore, the buyer has a lot of price options to choose his sales price for a customer. Since the buyer's order is affected by the customer's demand, the problems of determining the sales price and EOQ are interdependent and must be solved simultaneously. From this perspective, this paper evaluates the problem of determining the optimal sales price and EOQ for the buyer at the same time when the supplier allows a delay in payments for the product whose demand is represented as a function that decreases linearly with the sales price. For the analysis, it is also assumed that inventory is exhausted not only by customer's but also by decay.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2554-2566
• /
• 1994

Robot position/force control has been a difficult task owing to the interaction between a robot and an environment with a rather high stiffness. In addition to the dynamic instability, the interaction causes the following problem : 1) chattering at steady-state, 2) dynamic coupling effect of robot, and 3) performance degradation due to a titled environment. To solve the problem, the Time Delay Control(TDC), which has been known to be quiet robust to plant uncertainties and disturbances, has been applied. In conjunction to TDC, the following three ideas were also used : 1) To reduce the amplitude of the chattering at the steady state, a novel scheme was adopted to enhance the resolution type solution of A/D conversion for the force sensor. 2) To reduce the dynamic coupling, a trajectory type position command was tried on a comparative basis to the step command, as well as a more accurate mass matrix was used instead of the constant mass matrix. 3) And finally to improve the performance in the tilted environment, force derivatives instead of position derivatives were used in the TDC law. Computer simulations and experiments resulted in obvious improvements on the quality of the hybrid control, thereby clearly demonstrating the effectiveness of TDC with the proposed ideas.

• Kyungpook Mathematical Journal
• /
• 제48권4호
• /
• pp.665-684
• /
• 2008

Runge-Kutta-Nystr$\"{o}$m (RKN) methods provide a popular way to solve the initial value problem (IVP) for a system of ordinary differential equations (ODEs). Users of software are typically asked to specify a tolerance ${\delta}$, that indicates in somewhat vague sense, the level of accuracy required. It is clearly important to understand the precise effect of changing ${\delta}$, and to derive the strongest possible results about the behaviour of the global error that will not have regular behaviour unless an appropriate stepsize selection formula and standard error control policy are used. Faced with this situation sufficient conditions on an algorithm that guarantee such behaviour for the global error to be asympotatically linear in ${\delta}$ as ${\delta}{\rightarrow}0$, that were first derived by Stetter. Here we extend the analysis to cover a certain class of ODEs with low-order derivative discontinuities, and the class of ODEs with constant delays. We show that standard error control techniques will be successful if discontinuities are handled correctly and delay terms are calculated with sufficient accurate interpolants. It is perhaps surprising that several delay ODE algorithms that have been proposed do not use sufficiently accurate interpolants to guarantee asymptotic proportionality. Our theoretical results are illustrated numerically.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1427-1436
• /
• 1997

Turbo codes, decoded through an iterative decoding algorithm, habe recently been shown to yidel remarkable coding gains close to theoretical limits in the Gaussian channel environment. This thesis presents the performance of Turbo code through the computer simulation. The performance of modified Turbo code is compared to that of the conventional Turbo codes. The modified Turbo code reduces the time delay in decoding with minimal effect to the performance for voice transmission sytems. To achieve the same performance, random interleaver the size of which is no less than the square root of the original one should be used. Also, the modified Turbo code is applied to MC-CDMA system, and its performance is analyzed under the Rayleigh Fading channel environment. In Rayleigh fading channel environment, due to the amplitude distortion caused by fading, the interleaver of the size twice no less than that in the Gaussian channel enironment was required. In overall, the modified Turbo code maintained the performance of the conventional Turbo code while the time delay in transmission and decoding was reduced at the rate of multiples of two times the squared root of the interleaver size.

• 한국음향학회지
• /
• 제33권2호
• /
• pp.133-138
• /
• 2014

지터라고 불리는 패킷 도착 지연의 편차는 모바일 단말기에서 Voice over Internet Protocol (VoIP)음성의 품질을 저하시키는 주요한 원인 중 하나이다. 이 문제를 해결하기 위해서 본 논문에서는 VoIP 음질향상을 위한 적응적 지터추정 기반의 플레이아웃 스케줄링 방법을 제안한다. 제안된 알고리즘은 예측된 네트워크 지연의 변화에 따라 각각의 패킷을 신장 혹은 압축하여 전송 지터의 영향에 대응한다. 이와 함께, 네트워크 지터 추정은 신속한 지연 스파이크 검출과 네트워크 상태 변화에 대한 반응을 포함한다. 실험결과는 제안된 알고리즘이 불안정한 네트워크 환경에서 고음질을 제공하는 것을 보여 주었다.

• ETRI Journal
• /
• 제33권4호
• /
• pp.528-536
• /
• 2011

In this paper, we analyze the location accuracy of real-time locating systems (RTLSs) in multipath environments in which the RTLSs comply with the ISO/IEC 24730-2 international standard. To analyze the location error of RTLS in multipath environments, we consider a direct path and indirect path, in which time and phase are delayed, and also white Gaussian noise is added. The location error depends strongly on both the noise level and phase difference under a low signal-to-noise ratio (SNR) regime, but only on the noise level under a high SNR regime. The phase difference effect can be minimized by matching it to the time delay difference at a ratio of 180 degrees per 1 chip time delay (Tc). At a relatively high SNR of 10 dB, a location error of less than 3 m is expected at any phase and time delay value of an indirect signal. At a low SNR regime, the location error range increases to 8.1 m at a 0.5 Tc, and to 7.3 m at a 1.5 Tc. However, if the correlation energy is accumulated for an 8-bit period, the location error can be reduced to 3.9 m and 2.5 m, respectively.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권6호
• /
• pp.390-395
• /
• 2005

Sunspots are dark areas that grow and decay on the lowest level of the sun that is visible from the Earth. Shot-term predictions of solar activity are essential to help plan missions and to design satellites that will survive for their useful lifetimes. This paper presents a parallel-structure fuzzy system(PSFS) for prediction of sunspot number time series. The PSFS consists of a multiple number of component fuzzy systems connected in parallel. Each component fuzzy system in the PSFS predicts future data independently based on its past time series data with different embedding dimension and time delay. An embedding dimension determines the number of inputs of each component fuzzy system and a time delay decides the interval of inputs of the time series. According to the embedding dimension and the time delay, the component fuzzy system takes various input-output pairs. The PSFS determines the final predicted value as an average of all the outputs of the component fuzzy systems in order to reduce error accumulation effect.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.911-925
• /
• 1996

미래의 멀티미디어 응용 환경은 각 매체와 응용의 요구 사항들을 효율적으로 충족시킬 수 있는 유연한 오류 제어 모델을 필요로 하고 있으나, 지금까지의 오류 제어는 단일 매체를 처리하기 위한 제한된 유연성만이 제공되어왔다. 이를 해결하기 위하여 본 논문에서는 매체의 신뢰도 기준인 오류 허용률(ETL: Error Tolerance Level)과 응용의 실시간성 기준인 지연(Delay)을 고려하여 수송 계층에서 매체별로 유연하게 오류 제어 방법을 적용하는 모델을 제안한다. 이 모델에서는 매체별로 오류 제어 방법을 선정하기 위하여 오류 혀용률과 등시성과 같은 매체의 속성, 응용의 속성인 지연, 그리고 망에서의 데이터 손실율, 망의 전송 형태, 응용의 연결 모드와 같은 환경 파라미터가 영향 인자로써 고려되었다.

• 화약ㆍ발파
• /
• 제32권3호
• /
• pp.10-17
• /
• 2014

본 연구에서는 2자유면을 가진 암반의 장공발파 시 천공간격과 뇌관의 기폭시차에 따라 발생되는 내부주변형률의 변화를 확인하기 위하여 Visual FEA 유한요소 프로그램으로 해석 암반의 단면을 모델링하여 인접공균열권 내의 주요 절점에서 최대주변형률을 분석하였다. 결과적으로, 장공발파 시 천공간격이 좁고 기폭시차가 길수록 인접공 균열권 내에 미치는 최대주변형률 값이 크게 나타났고, 장약장 내 폭약의 기폭 위치에 따라 최대 주변형률의 차이를 보였다.

• 한국연소학회지
• /
• 제22권1호
• /
• pp.1-7
• /
• 2017

This paper presents an experimental study on the effect of double injection strategies on combustion characteristics in a single-cylinder diesel engine. These studies are applied to the double injection strategies, such as $2^{nd}$ injection timing variations with fixed injection interval (8 degree) and variations of injection pressures with fixed injection timing and intervals. The injection quantity was 7 + 7 mg for double injections, and 14 mg for single injection. When the injection pressure was increased, the ignition delay was shortened, and the ISFC (indicated specific fuel consumption) was increased due to the fast termination of combustion by the shortened energizing duration. In addition, the retardation of injection timings toward TDC (top dead center) caused the reduction of ignition delay and the decrease of ISFC with the decrease of FMEP (friction mean effective pressure).