• 제목/요약/키워드: delay effect

검색결과 1,573건 처리시간 0.029초

다중 홉 광 버스트 교환망에서 종단간 수율 향상을 위한 홉 단위 우선 순위 증가 기법 (Hop-by-Hop Priority Increasing Scheme for Improving End-to-end Throughput in Multi-Hop OBS Networks)

  • 김병철;조유제
    • 대한전자공학회논문지TC
    • /
    • 제40권10호
    • /
    • pp.35-42
    • /
    • 2003
  • 본 논문에서는 광 버스트 교환 방식에서 사용되는 제어 패킷 처리 시간 보상 기법 및 자원 예약 기법을 분류하고 다중 홉 환경에서 대표적인 예약 방식인 OT/DR (Offset Time/Delayed Reservation) 기반 JET(Just-Enough-Time) 방식의 문제점인 Path length priority effect를 분석하였다. 그리고, 이러한 문제점을 해결하면서 입력 FDL(Fiber Delay Line)을 사용하여 홉 단위로 우선 순위를 증가시켜 종단간 수율을 개선시킬 수 있는 FDL/DR 방식 기반의 홉 단위 우선 순위 증가 기법을 제안하고 시뮬레이션을 통하여 성능을 비교 분석하였다. 시뮬레이션을 통한 성능 분석 결과 제안된 방식은 다중 홉 환경에서 path length priority effect로 인해 발생하는 기존 방식의 문제점을 개선하여 종단간 성능이 향상됨을 알 수 있었다.

The robustness of continuous self tuning controller for retarded system

  • Lee, Bongkuk;Huh, Uk Youl
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
    • /
    • pp.1930-1933
    • /
    • 1991
  • In this paper, the robustness of self turning controller on the continuous time-delay system is investigated. The polynomial identification method using continuous time exponentially weighted least square algorithm is used for estimating the time.-delay system parameters. The pole-zero and pole placement method are adopted for the control algorithm. On considering the control weighting factor and reliability filter the effect of unmodeled dynamics of the plant are examined by the simulation.

  • PDF

흡입습도가 스파아크 점화기관의 연소과정에 미치는 영향 (Effect of inlet air humidity on the combustion process of the spark-ignition engine)

  • 김문헌;이성열
    • 오토저널
    • /
    • 제5권2호
    • /
    • pp.41-47
    • /
    • 1983
  • The analysis shows that the variation of maximum pressure of the cycle, rate of hear release, rate of mass burned, and combustion delay are influenced by the inlet air humidity in the spark-ignition engine. The quantitative combustion delay can be obtained from the rate of mass burned. Also, the variation of time loss and effective compression ratio with the change of inlet air humidity are dominated by the development of rate of heat release.

  • PDF

팩스 통신망 입출력회선 비율 설정에 관한 시뮬레이션 분석 (A Simulation Analysis for Selecting In/Out Port Ratio in FAX Network System Operation)

  • 나윤균
    • 한국시뮬레이션학회논문지
    • /
    • 제8권2호
    • /
    • pp.101-109
    • /
    • 1999
  • In a commercial facsimile network system, a simulation analysis has been performed using ARENA due to the unavailability of theoretical models. The effect of a priority is compared with that of the current FCFS rule on the arriving call blocking rate and transmission time delay. The result shows that the priority rule reduces more service time delay as the arrival rate increases. A simulation analysis procedure is proposed to select optimal in/out port ratio at various hourly arrival rates with a given multiple-place transmission requests ratio.

  • PDF

디지털 시스템설계를 위한 CMOS 인버터게이트 셀의 지연시간 (The Delay time of CMOS inverter gate cell for design on digital system)

  • 여지환
    • 한국산업정보학회:학술대회논문집
    • /
    • 한국산업정보학회 2002년도 춘계학술대회 논문집
    • /
    • pp.195-199
    • /
    • 2002
  • This paper describes the effect of substrate back bias of CMOS Inverter. When the substrate back bias applied in body, the MOS transistor threshold voltage increased and drain saturation current decreased. The back gate reverse bias or substrate bias has been widely utilized and the following advantage has suppressing subthreshold leakage, lowering parasitic junction capacitance, preventing latch up or parasitic bipolar transistor, etc. When the reverse voltage applied substrate, this paper stimulated the propagation delay time CMOS inverter.

  • PDF

비동기 MC-CDMA 상향 링크 시스템에서의 시간 옵셋 영향 분석 (Effect Analysis of Timing Offsets for Asynchronous MC-CDMA Uplink Systems)

  • 고균병;우중재
    • 대한전자공학회논문지TC
    • /
    • 제47권8호
    • /
    • pp.1-8
    • /
    • 2010
  • 본 논문에서는 Cyclic prefix 형태의 보호구간을 갖는 비동기 MC-CDMA 상향 링크 시스템의 시간 옵셋의 영향을 주파수 선택적 다경로 페이딩 채널에 대하여 분석하였다. 분석을 위하여 시간 옵셋을 보호구간 및 최대 접속 지연 시간 (maximum access delay time)과 관련하여 모델링하였다. 수식적 분석을 통하여 시간 옵셋이 원하는 신호성분의 전력 누수와 자기 간섭성분을 발생시키는 것을 확인하였다. 이러한 시간 옵셋이 유효 SNR 및 평균 오류율에 미치는 영향을 분석하였다. 근사화를 통하여 평균 오류율 및 SNR 감쇄를 닫혀진 형태로 유도하였다. 분석결과의 정확성은 모의실험 결과와의 비교를 통해 다양한 시간 옵셋 및 SNR에 대해 검증하였다.

중첩 모델링을 통한 발파진동의 특성에 관한 연구 (A Study on the Characteristics of Blasting Vibration by Superposition Modeling)

  • 강추원;김승현;박현식
    • 터널과지하공간
    • /
    • 제16권4호
    • /
    • pp.326-333
    • /
    • 2006
  • 본 연구에서는 측정된 진동파형을 토대로 다른 발파공들로부터 간섭을 받지 않은 단일공의 진동파형을 분리 하였고 이를 FFT 주파수 분석을 통하여 우세 주파수를 분석하였다. 또한 진동의 지속시간과 발파공수가 PPV에 미치는 영향을 검토하기 위해 분리된 진동파형을 $2{\sim}15$공으로 발파공수를 조절하면서 $1{\sim}80ms$까지 1 ms의 간격으로 지연시차에 변화를 주며 발파진동에 중첩 모델링을 실시하였다. 그 결과 진동의 지속시간이 길어질수록 다른 발파공들로부터 간섭받지 않기 위한 지연시차 또한 길어졌고 동일 지연시차 내에서의 발파공 수에 관한 영향은 크게 나타나지 않았다.

파이로추력기의 점화시간차 영향 (Effect of Ignition Delay Time Gap on the Linked Pyrotechnic Thrusters)

  • 김기언;전인수;안성우
    • 한국군사과학기술학회지
    • /
    • 제14권1호
    • /
    • pp.154-159
    • /
    • 2011
  • The effect of the ignition delay time gap is newly studied. The operational characteristics of the linked two pyrotechnic thrusters are affected by the time gap. Although two thrusters are simultaneously ignited, the time at which the pressure starts to rise in each thruster may not be synchronized. The characteristic of the system with the time gap is compared with that of the fully synchronized system without any time gap. Depending upon the magnitude of the time gap, the pressure-time profile and the ballistic performance are different. When two pyrotechnic thrusters have a time gap, the peak pressure of one thruster(in which the pressure is built up earlier) is increased and the other is decreased. As the time gap is increased, the peak pressure is converged into the maximum pressure. This maximum pressure can be obtained when only one thruster is activated. Because the maximum pressure is bounded, it is predicted that there isn't any catastrophic failures in the considered system. When the time gap is relatively small, the impulse of the combined force acting on the moving body is almost maintained. But the ballistic performance of the system with a large time gap should be carefully estimated because the reduction of the ballistic performance should not be easily neglected.

표면탄성파를 이용한 자이로스코프 개발 (Development of a SAW based Gyroscope)

  • 오해관;윤성진;이기근;왕웬;양상식
    • 한국군사과학기술학회지
    • /
    • 제12권1호
    • /
    • pp.106-113
    • /
    • 2009
  • This paper presents a surface acoustic wave(SAW) micro-electro-mechanical-systems(MEMS) interdigital transducer (IDT) gyroscope with 80MHz central frequency on a $128^{\circ}\;YX\;LiNbO_3$, which is consisted of a two-port SAW resonator, metallic dots and dual delay lines for the sensor and reference oscillators. Reason for using two delay line oscillators is to extract the gyroscope effect by comparing the resonant frequencies between two oscillators and to compensate the temperature effect. Based on the coupling of modes(COM) simulation, an 80MHz two ports SAW resonator and dual delay line were fabricated and characterized by the network analyzer. Obtained sensitivity was $109Hz/deg{\cdot}s^{-1}$ in the angular rate range of $0{\sim}1000deg/s$. Good Linearity and superior directivity were observed.