• Journal of the Korean institute of surface engineering
• /
• v.51 no.6
• /
• pp.360-364
• /
• 2018

A facile method to fabricate freestanding CuO nanoleaves and CuO nanowires-based films was demonstrated. $Cu(OH)_2$ nanoleaves and nanowires were prepared by a hydrolysis reaction in aqueous solution including pyridine and NaOH with the tailored concentrations at room temperature. The films of freestanding CuO nanoleaves and CuO nanowires can be successfully obtained via the simple vacuum infiltration following a thermal dehydration reaction. The morphologies and crystallinity of the $Cu(OH)_2$ nanoleaves/nanowires and CuO nanoleaves/nanowires were characterized by XRD, SEM, TEM and FT-IR. The films fabricated with freestanding CuO nanoleaves and nanowires in this study may be applicable for building high-efficiency organic binder-free devices, such as gas sensors, batteries, photoelectrodes for water splitting and so on.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1095-1103
• /
• 1996

In order to minimize the deterioration of dried apple quality, changes of free sugar content, organic acid and ascorbic and during osmotic dehydration with sucrose at various temperature, concentration and immersion time were investigated in this study, total sugar increased as the temperature, concentration and immersion time were increased. Sucrose showed the largest change in content while fructose and glucose showed no and small changes, respectively. Large amounts of malic and fumaric acids, and small amounts of oxalic, citric, maleic and succinic acids were detected. Organic acids were high at low temperature treatment, and became higher with increasing concentration. Loss of ascorbic acid was small at the low temperature and high concentration. Effect of immersion time was negligible. Changes of free sugar, and organic and ascorbic acid followed the first-order and second-order reaction rate equations, respectively. Arrhenius equation was applied to determine the effect of temperature on reaction rate constants with high $r^2$. To predict the changes of quality, a model was established by using the optimum functions of temperature, concentration and immersion time. The model had high $r^2$ value for the quality changes during drying.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.103-111
• /
• 2016

Li-bearing hectorite, one member of trioctahedral smectite, occurred large in quantity and confirmed in Turkey western sedimentary boron deposit. Li-bearing hectorite attracted a particular attention because it is one of potential lithium resources. There have been no consensus for the change of hectorite due to heat and acid treatment although it is very important to use in industrial application. In this study, we examined changes of hectorite after heat and acid treatment as well as acid treatement followed by heating. We used clay ores collected in Bigadic deposit, which contained the highest $Li_2O$ content in Turkey boron deposits. Hectorite showed a strong endothermic reaction at $84^{\circ}C$ due to dehydration of absorbed water and interlayer water and a weak endothermic reaction above $600^{\circ}C$ owing to dehydration of crystallization water. The first endothermic reaction accompanied a large weight loss about 6%. Hectorite decomposed into enstatite, cristobalite and amorphous Fe material at $762^{\circ}C$ with exothermic reaction. When hectorite reacted with 3 kinds of 0.1 M acid during 1 hours, it had a good dissolution efficiency with $H_2SO_4{\geq}HCl$ > $HNO_3$ in order.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.264-264
• /
• 2012

As an environment-friendly alternative energy resource, ethanol may be used to obtain hydrogen, a clean energy source. Thus, studies on catalytic reactions involving ethanol have been studied to understand the underlying principles in the reaction mechanism using various oxide-supported catalysts. Among them, Au-based catalysts have shown a superior activity in producing hydrogen gas. In the present study, Au/$TiO_2$ catalysts were prepared by deposition-precipitation method to understand their catalytic activities toward ethanol and acetaldehyde with increasing gold loading, especially at the very low Au loading regime. A commercially available $TiO_2$ (Degussa P-25) was employed and the Au loading was varied to 0, 0.1, 0.5, and 1.0 wt% respectively. The catalysts showed characteristic x-ray diffraction (XRD) features at $2{\theta}=78.5^{\circ}$ that could be assigned to the presence of gold nanoparticles. Its reactivity measurements were performed under a constant flow of ethanol and acetaldehyde at a flow rate of ${\sim}0.6{\mu}mol/sec$ and the substrate temperature was slowly raised at a rate of 0.2 K/sec. We observed that the overall reactivity of the catalysts increased with increasing Au loading along with selectivity favoring dehydrogenation to product hydrogen gas. In addition, we disclosed various reaction channels involving competitive reaction paths such as dehydrogenation, dehydration, and condensation. In addition, subsequent reactions of acetaldehyde obtained from dehydrogenation of ethanol, were found to occur and produce butene, crotonaldehyde, furan, and benzene. Based on the results, we proposed overall reaction pathways of such reaction channels.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.1957-1964
• /
• 2011

Various reaction conditions uding temperature, time and type and concentration of templates have been changed in order to facilely synthesize, especially with microwave (MW) heating, SAPO-34 molecular sieves. SAPO-34 molecular sieve can be synthesized rapidly with microwave irradiation from a gel containing tetraethylammonium hydroxide (TEAOH) as a template. However, other several templating molecules lead to SAPO-5 molecular sieve under microwave irradiation even though SAPO-34 is obtained by conventional electric synthesis from the same reactant gels. Moreover, SAPO-34 can be obtained more easily by increasing the TEAOH or silica concentration or by increasing the reaction temperature. SAPO-34 can be obtained within 5 min in a selected condition (high temperature of 210 $^{\circ}C$) with microwave heating, which may lead to a continuous production of the important material. SAPO-34 synthesized by microwave irradiation is homogeneous and small in size and shows acidity and a stable performance in the dehydration of methanol and 2-butanol to olefins, suggesting potential applications in acid catalysis.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2283-2288
• /
• 2010

Nanostructured copper compounds were grown by electrochemical anodization of copper foil in aqueous NaOH under varying conditions including electrolyte concentration, reaction temperature, current density, and reaction time. Their morphology and atomic composition were investigated by using SEM, TEM, XRD, EDS and XPS. At the conditions ([NaOH] = 1 M, $20^{\circ}C$, $2\;mA\;cm^{-2}$), wire-like orthorhombic $Cu(OH)_2$ nanobundles with an average width of 100 - 300 nm and length of $10\;{\mu}m$ were synthesized with the preferential [100] growth direction. Furthermore, when the concentration decreased to 0.5 M NaOH, the 1D nanobundle structure became narrower and longer without any change in compositions or crystalline structure. Side reaction pathways appeared to compete with the 1D nanostructure formation channels: the formation of CuO nanoleaves at $50^{\circ}C$ via the sequential dehydration of $Cu(OH)_2$, CuO/$Cu_2O$ aggregates in 4 M NaOH, and $Cu_2O$ nanoparticles and CuO nanosheets at lower current density.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.9-14
• /
• 2012

Formed fermentation inhibitors during acid saccharification leads to poor alcohol production based on lignocellulosic bio-alcohol production process. In this work, it is focused on the formation of fermentation inhibitors from xylan, which is influenced by reaction tempearature and time of acidic sacharifiaction of xylose and glucuronic acid. In second step of concentrated acid hydrolysis, part of xylose and glucuronic acid was converted to furfuraldehyde and formic acid by dehydration and rearrangement reactions. Furfural was form from xylose, which was highly sensitive to reaction temperature. Formic acid was come from both xylose and glucuronic acid, which supposed to main inhibitor in biobutanol fermentation. Reaction temperature of second hydrolysis was main variables to control the furfural and formic acid generation. Careful control of acid saccharification can reduce generation of harmful inhibitors, especially second step of concentrated sulfuric acid hydrolysis process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.35-35
• /
• 2010

Understanding the mechanistic details of heterogeneous catalytic reactions will provide a way to tune the selectivity between various competing reaction channels. In this regard, catalytic decomposition of alcohols over the rutile $TiO_2$(110) surface as a model oxide catalyst has been studied to understand the reaction mechanism employing the temperature-programmed desorption (TPD) technique. The $TiO_2$(110) model catalyst is found to be active toward alcohol dehydration. We find that the active sites are bridge-bonded oxygen vacancies where RO-H heterolytically dissociates and binds to the vacancy to produce alkoxy (RO-) and hydroxyl (HO-). Two protons adsorbed onto the bridge-bonded oxygen atoms (-OH) readily react with each other to form a water molecule at ~500 K and desorb from the surface. The alkoxy (RO-) undergoes decomposition at higher temperatures into the corresponding alkene. Here, the overall desorption kinetics is limited by a first-order decomposition of intermediate alkoxy (RO-) species bound to the vacancy. We show that detailed analysis on the yield and the desorption temperatures as a function of the alkyl substituents provides valuable insights into the reaction mechanism. After the catalytic role of the oxygen vacancies has been established, we employed x-ray photoelectron spectroscopy to further study the surface electronic structure related to the catalytically active defective sites. The defect-related state in valence band has been related to the chemically reduced $Ti^{3+}$ defects near the surface region and are found to be closely related to the catalytic activity of the $TiO_2$(110) surface.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.52-58
• /
• 2011

Proton-NMR spectroscopic method was applied to kinetic study of concentrated sulfuric acid hydrolysis reaction, especially focused on 2nd step of acid hydrolysis with deferent reaction time and temperature as main variables. Commercial xylan extracted from beech wood was used as model compound. In concentrated acid hydrolysis, xylan was converted to xylose, which is unstable in 2nd hydrolysis condition, which decomposed to furfural or other reaction products. Without neutralization steps, proton-NMR spectroscopic analysis method was valid for analysis of not only monosaccharide (xylose) but also other reaction products (furfural and formic acid) in acid hydrolyzates from concentrated acid hydrolysis of xylan, which was the main advantages of this analytical method. Higher temperature and longer reaction time at 2nd step acid hydrolysis led to less xylose concentration in xylan acid hydrolyzate, especially at $120^{\circ}C$ and 120 min, which meant hydrolyzed xylose was converted to furfural or other reaction products. Loss of xylose was not match with furfural formation, which meant part of furfural was degraded to other undetected compounds. Formation of formic acid was unexpected from acidic dehydration of pentose, which might come from the glucuronic acid at the side chain of xylan.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1029-1033
• /
• 1997

Fundamental research of non-isothermic analysis of reaction rate has been carried out for the heat storage system using the thermal decomposition of $Na_2B_4O_7{\cdot}10H_2O$. It was found that the equilibrium temperature of the thermal decomposition reaction was lowered less than 373K in $Na_2B_4O_7{\cdot}10H_2O/Na_2B_4O_7{\cdot}5H_2O$ system, but the heat efficiency was unchanged. The initiation temperature of the reaction was varied from low to high temperature region with heating rate. The reaction order of the dehydration reaction by the thermal decomposition was appeared to be 0.67 by non-isothermic analysis, thereby $Na_2B_4O_7{\cdot}10H_2O$ may be used as a hemical heatstorage material.