• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5384-5393
• /
• 2015

We investigated the effects of milling degrees of rice on characteristics of the steamed rice and fermentation of rice koji as a raw material of cheongju. It was studied for 8 months about ratio of water absorption and koji charateristics according to milling degrees. The The more increasing rice milling, the less the protein contents of milled rice was continuously decreased and the lipid and ash contents were sharply decreased to until the milling degrees 20%, and then gradually decreased. When steeping the milled rice, higher milling degrees raised rapid water asorption and higher maximum water asorption, lower water temperature raised gradual water absorption and higher maximum absorption. The longer steeping time, the steamed rice milling degrees 40% showed significantly lower hardness and springness than others. Alcohol contents of the fermented mash with rice koji milling degrees 10% was lower with 16.3-16.9%(v/v) than other sample's 17.1-17.5% (v/v). The total acid contents showed that the milling degrees 10% indicated the lowest content(0.71-0.76%) and the milling degrees 30% indicated highest content(0.93-0.99%). Within the same milling degrees, As the steeping time increases, the total acid contents imcrease. In conclusion, the milling degrees influenced on physicochemical chatacteristics of rice and steamed rice condition.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.848-856
• /
• 2017

This study aimed to investigate the effect of rice nuruk prepared from rice with different degrees of milling (0, 10, 30, 50, and 70%) on physicochemical qualities of yakju. The results indicated significant differences in the qualities of yakju prepared using rice nuruk from rice with different degrees of milling. Specially, pH, amino acidity, brownness, b value, and color difference were significantly reduced as the degrees of milling increased, whereas contents of alcohol and volatile acid, reducing sugar, and L value were increased. Malic acid, succinic acid, and lactic acid were the main organic acids in yakju, and there were significant differences among the treatments in malic acid, lactic acid. However, there was no tendency according to different degrees of milling. In addition, contents of total free amino acids and nitrogen compounds showed no tendency according to degrees of milling, whereas the content of aspartic acid showed a tendency to decrease significantly. The content of 2-phenyl alcohol in the volatile flavor components showed a tendency to increase significantly with higher degree of milling of rice nuruk, whereas contents of n-propanol and iso-amyl alcohol tended to decrease significantly.

• Korean Journal of Food Science and Technology
• /
• v.49 no.3
• /
• pp.265-273
• /
• 2017

In this study, the effect of nuruk prepared from rice with different degrees of milling on the physicochemical and sensory qualities of yakju after accelerated aging was investigated. The results indicated significant differences, except for Fe and Mn contents, in the qualities of aged yakju prepared using nuruk from rice with different degrees of milling. However, the degree of milling of rice did not influence the quality of yakju, except for amino acidity and pH, which significantly decreased as the degrees of milling increased. In addition, as compared to before aging, brownness ($A_{430}$) and color difference significantly increased after aging in all the treatments. The intensity of off flavor in yakju after aging made from 0% milled rice nuruk was the lowest.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.187-191
• /
• 2016

The objective of this study was to analyze the volatile compounds in rice under various milling degrees using a mass spectrometry-based electronic nose and discriminant function analysis (DFA). Less volatile components were more frequently found in rice with a lower milling degree. Milling degree resulted in a shift of DF1 to the left side of the DFA plot. This indicated that the DF1 scores were correlated with the milling degree of rice. Brown rice was found to have more volatile components regardless of the milling degree. Thus, rice prepared at different milling degrees could be effectively discriminated with electronic nose analysis. Moreover, more volatile components were detected with an increase in storage time. A slight change in volatile components was found with an increase in the milling degree. The electronic nose could predict the milling degree and storage time of rice.

• Korean journal of food and cookery science
• /
• v.11 no.1
• /
• pp.51-57
• /
• 1995

The effect of milling on the nutrients of raw and parboiled rice grain samples was investigated. Parboiling treatments of choo chung paddy decreased head rice yields and pressure parboiling proved to be more beneficial in reducing white belly rice. Except PP sample mean length/width ratio of parboiled milled rice kernels(8% milling degree) were more larger than raw milled rice and the extent depended on severity of parboil heat treatment. Parboiling had no effect on the protein content of browm rice(0% milling degree) but increased in 4%, 8% milling degree and in PL40 sample. Parboiled rice had a lower fat and the extent depended on degree of milling. Ash content of parboiled brown rice decreasd compared to raw brown rice and generally decreased according to milling degrees were high. Nevertheless, PP, PT40 and PL40 parboiled milled rice samples(0% milling degree) contained more ash than raw milled rice. Parboiling increased total sugar and reducing sugar and increased according to milling degrees were high. Parboiled rice had a high reducing sugar content than raw rice except for PT sample, and more contained as higher milling degree. Total amino acid content of parboiled brown rice increased compared to raw brown rice except for PL40 sample. Parboiled rice of 4% milling degree had a lower total amino acid content and then 8% milling degree had a higher than raw rice. Ca content of parboiled rice was lower than raw rice and tended to have lower as milling degree were high. Parboiled rice of 0 and 4% milling degree had a lower Fe content degree but higher in 8% milling degree. PP and PT40 samples contained more Fe than any other parboiled rice. Parboiled milled rice contained more thiamin than raw milled rice. Rice of milling degree 6% and PL sample contained most thiamin.

• Korean Journal of Food Science and Technology
• /
• v.48 no.3
• /
• pp.256-261
• /
• 2016

This study investigated the changes in functional components of barley powder produced from different grain varieties (Dahan, Hinchalssalbori, Heukgwang, Huknuri and Boseokchal) and varying milling degrees (27, 23, 19, and 15%). Total polyphenol contents increased with a decrease in the milling degree, with content ranges of 0.97-1.40, 1.19-1.66, 1.22-1.77, 1.30-1.93, and 1.46-2.12 mg/g, respectively. Total flavonoids content also increased with a decrease in the milling degree. The total polyphenol and flavonoids contents were the highest in barley powder from Huknuri and Boseokchal grains. Total dietary fiber, arabinoxylan, and GABA contents increased with a decrease in the milling degree. As the milling degrees decreased, ${\beta}$-glucan contents, which was the highest in Hinchalssalbori and Boseokchal, decreased with ranges of 4.98-7.29, 5.26-7.03, 4.84-7.17, 4.84-700, and 4.66-6.33 mg/100 g, respectively. These results provide useful data for selection of an appropriate variety and milling degree to achieve a high quality in barley processing.

• Korean Journal of Food Science and Technology
• /
• v.47 no.5
• /
• pp.639-644
• /
• 2015

This study investigated changes in physicochemical characteristics of barely powder produced from different cultivars (Dahan, Hinchalssal, Heugkwang, Heugnurl and Boseokchal) and with different degrees (15, 19, 23, and 27%) of milling. Crude protein content increased with decreasing milling degrees, with content ranges of 7.38-10.09, 8.01-10.58, 9.47-11.62, and 9.03-12.08%, respectively. Further crude lipid and ash content increased with decreasing milling degree. The crude lipid content was highest in Dahan-milled barley, while crude ash content was highest in Hinchalssal-milled barley. As the milling degree decreased, palmitic and stearic acid composition decreased and oleic and linoleic acid composition increased. Major minerals present in the barley powder were Ca, Fe, K, Mg, Mn, Na, and Zn. K and Mg content increased with decreasing milling degree. These results indicate that further studies are needed to optimize the cultivar usage and degree of milling for manufacture of various barley products.

• Food Science and Preservation
• /
• v.13 no.6
• /
• pp.675-680
• /
• 2006

Uniform milling is regarded as a very essential technology to produce high quality milled rice in Rice Recessing Complex. But non-uniformly milled rice can be produced very easily because of unadequate operation methods of milling system and bad brown rice conditions. This study was conducted to find out the bad effect of non-uniform milling degrees and store temperatures on quality characteristics such as taste of cooked rice, fatty acidity, whiteness and so on of milled rice during storage. According to the increase of non-uniform milling degrees, the fatty acid acidity and b value were increased very rapidly, and taste of cooked rice and whiteness were decreased very rapidly during storage. And the general quality characteristics of milled rice were better at low temperature storage of $5^{\circ}C$ than at high temperature storage at $25^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3289-3293
• /
• 2014

Femtosecond laser ablation (fs LA) was used in this study to identify pollution by heavy metals and the distribution of elemental nutrients at different rice milling ratios. Polished rice (degrees of milling of 3, 5, 7, 9, and 11) was collected from major Korean supermarkets and one sample thereof was selected. An internal quality control experiment was conducted using a rice flour certified reference material from the Korea Research Institute of Standards and Science (KRISS CRM) for the evaluation of the efficacy. To assess the effectiveness of the analysis method, the reliability was validated using a food analysis performance assessment scheme (FAPAS), with chili powder serving as an external quality control. The results of the analysis of the inorganic elements Ti, Ca, Al, Fe and Mn in white and brown rice with degrees of milling of 3, 5, 7, 9 and 11 using ICP-MS, ICP-OES and AAS revealed contents of 0.40, 49.2, 2.43, 5.36 and 10.3 mg/kg in white rice and 0.59, 78.0, 7.52, 11.0 and 18.5 mg/kg in brown rice, respectively. Among the elements, there were remarkable differences in the measured contents. By comparing the contents of the elements at different degrees of milling, Ti, Co, As, Ca, Al, Cu, Fe, and Mn were determined to be distributed on the surface of the rice grains, whereas the contents of Cd and Pb increased toward the center of the rice grains, and Si was evenly distributed. After the quantitative analysis of rice samples polished to different degrees of milling, Ca and Al, which were contained in large amounts, and Si were analyzed with specificity by fs LA. The results show that Ca and Al were distributed in the rice husk (protective covering of rice) and Si was distributed in all parts of the rice.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.4
• /
• pp.303-308
• /
• 2015

BACKGROUND: Recently, various rice by milling degree is sold for health and taste. To provide safe food to consumers, it is need to know the change of heavy metal contents according to milling degree of rice.METHODS AND RESULTS: This study was to investigate residual the levels of cadmium (Cd), lead (Pb), copper (Cu) and zinc (Zn) as stated in the milling degree of the rice contaminated Cd and Pb from 2011 to 2012 in Chungcheongnam-do. Rice samples exceeded the maximum residue limits (MRL) of Cd and Pb were milled by five degrees (0.0, 2.45, 8.02, 10.48, 15.09%). Milled rice was digested by microwave method, and analyzed heavy metal contents using ICP-OES. Recovery ratios of 4 heavy metals such as Cd, Pb, Cu and Zn were ranged for 79.7-98.9%, and limits of detection (LOD) and limits of quantitation (LOQ) were fulfilled with the normal analytical standards. Concentrations of Cd, Pb, Cu and Zn were ranged 0.416-0.433 mg/kg, 0.183-0.26 mg/kg, 3.639- 3.882 mg/kg and 16.868-19.801 mg/kg, respectively.CONCLUSION: From these results, conforming with increase of milling degree of rice, Cd, Pb, Cu, and Zn contents tended to decrease. The contents of heavy metals were decreased 3.1% in Cd, 29.3% in Pb, 6.4% in Cu and 15.1% in Zn, in according to the highest milling degree of 15.09%.