• Structural Engineering and Mechanics
• /
• v.13 no.4
• /
• pp.369-385
• /
• 2002

Ductility capacity is comprehensively studied for steel moment-resisting frames. Local, story and global ductility are being considered. An appropriate measure of global ductility is suggested. A time domain nonlinear seismic response algorithm is used to evaluate several definitions of ductility. It is observed that for one-story structures, resembling a single degree of freedom (SDOF) system, all definitions of global ductility seem to give reasonable values. However, for complex structures it may give unreasonable values. It indicates that using SDOF systems to estimate the ductility capacity may be a very crude approximation. For multi degree of freedom (MDOF) systems some definitions may not be appropriate, even though they are used in the profession. Results also indicate that the structural global ductility of 4, commonly used for moment-resisting steel frames, cannot be justified based on this study. The ductility of MDOF structural systems and the corresponding equivalent SDOF systems is studied. The global ductility values are very different for the two representations. The ductility reduction factor $F_{\mu}$ is also estimated. For a given frame, the values of the $F_{\mu}$ parameter significantly vary from one earthquake to another, even though the maximum deformation in terms of the interstory displacement is roughly the same for all earthquakes. This is because the $F_{\mu}$ values depend on the amount of dissipated energy, which in turn depends on the plastic mechanism, formed in the frames as well as on the loading, unloading and reloading process at plastic hinges. Based on the results of this study, the Newmark and Hall procedure to relate the ductility reduction factor and the ductility parameter cannot be justified. The reason for this is that SDOF systems were used to model real frames in these studies. Higher mode effects were neglected and energy dissipation was not explicitly considered. In addition, it is not possible to observe the formation of a collapse mechanism in the equivalent SDOF systems. Therefore, the ductility parameter and the force reduction factor should be estimated by using the MDOF representation.

• Steel and Composite Structures
• /
• v.25 no.1
• /
• pp.79-92
• /
• 2017

Initial damage to a stud due to corrosion, fatigue, unexpected overloading, a weld defect or other factors could degrade the shear capacity of the stud. Based on typical push-out tests, a FEM model and theoretical formulations were proposed in this study. Six specimens with the same geometric dimensions were tested to investigate the effect of the damage degree and location on the static behavior and shear capacity of stud shear connectors. The test results indicated that a reduction of up to 36.6% and 62.9% of the section area of the shank could result in a dropping rate of 7.9% and 57.2%, respectively, compared to the standard specimen shear capacity. Numerical analysis was performed to simulate the push-out test and validated against test results. A parametrical study was performed to further investigate the damage degree and location on the shear capacity of studs based on the proposed numerical model. It was demonstrated that the shear capacity was not sensitive to the damage degree when the damage section was located at 0.5d, where d is the shank diameter, from the stud root, even if the stud had a significant reduction in area. Finally, a theoretical formula with a reduction factor K was proposed to consider the reduction of the shear capacity due to the presence of initial damage. Calculating K was accomplished in two ways: a linear relationship and a square relationship with the damage degree corresponding to the shear capacity dominated by the section area and the nominal diameter of the damaged stud. This coefficient was applied using Eurocode 4, AASHTO LRFD (2014) and GB50017-2003 (2003) and compared with the test results found in the literature. It was found that the proposed method produced good predictions of the shear capacity of stud shear connectors with initial damage.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.41-44
• /
• 2021

In this paper, we propose an efficient reference-based compression artifact reduction network for 360-degree images in an equi-rectangular projection (ERP) domain. In our insight, conventional image restoration methods cannot be applied straightforwardly to 360-degree images due to the spherical distortion. To address this problem, we propose an adaptive disparity estimator using a deformable convolution to exploit correlation among 360-degree images. With the help of the proposed convolution, the disparity estimator establishes the spatial correspondence successfully between the ERPs and extract matched textures to be used for image restoration. The experimental results demonstrate that the proposed algorithm provides reliable high-quality textures from the reference and improves the quality of the restored image as compared to the state-of-the-art single image restoration methods.

• Resources Recycling
• /
• v.2 no.4
• /
• pp.10-16
• /
• 1993

Reduction behavior of stainless steelmaking dust by microwave heating process was investigated using coke and charcoal as reducing agents. Pellet dust and stanless steelmaking dust pelletized with reducing agent were reduced by the heating upto $1000^{\circ}C$ in microwave oven. The results showed that charcoal and coke seemed effective in the reduction of metals from stainless steelmaking dust by microwave heating and charocal was found to be better than coke. Degree of reduction seemed similar with the power of 500W and 700W in microwave oven. Dusts were rapidly reduced within 20 minutes. Reducing degree decreased in the order of Fe>Ni>Cr.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.659-663
• /
• 1997

In this paper, a simplified vibration analysis model for bellows was presented to avoid excessive effort required for shell model. To reduce degree of freedom, bellows was modelled using one dimensional beam element. The equivalent mass and stiffness matrices were obtained based upon Guyan reduction process. The results were compared with the confirmed results, which were in good agreement.

• Journal of Korean Physical Therapy Science
• /
• v.21 no.1
• /
• pp.53-58
• /
• 2014

Background : The purpose of this study is to identify the level of positive influence on the pain and the gripping power in patients with tennis elbow by comparing the TENS treatment method and the kinesio taping therapy with good accessibility among the kinesio taping therapy and electrical therapy. Methods : Targeting the patients diagnosed with tennis elbow, the subjects were categorized in groups of four, each of electrical therapy group and kinesio tape therapy group where the degree of pain reduction through VAS before and after the treatment of each group and the measurement of the degree of gripping power increase using the gripping power measurement tool as well as the pain reduction changes and gripping power increase before and after the treatment between the two groups were compared. Result : As a result, the electrical therapy group and the kinesio tape group were able to obtain the results of pain reduction and gripping power increase through VAS before and after the treatment, but for all pain reduction and gripping power increase, it had no statistically significant changes(p>.05). In addition, in the changes of pain reduction and changes of gripping power increase before and after the treatment, there were no statistically significant differences between the electrical therapy group and the kinesio tape group(p>.05). Conclusion : Based on the results so far, it is thought that the kinesio taping therapy can positively influence the pain reduction of patients with tennis elbow and increase of gripping power.

• Journal of Yeungnam Medical Science
• /
• v.11 no.1
• /
• pp.167-180
• /
• 1994

In order to inquire the most effective management of increased intracranial pressure(ICP), mannitol, steroid and hyperventilation were used in rabbits after ligation or non-ligation of the carotid artery. Mannitol was more effective than steroid and hyperventilation in the degree of the reduction of ICP. The intracranial pressure was decreased 43~45% for 25~30 minutes after injection of mannitol. Steroid was less effective than mannitol in the degree of the reduction of ICP. But the time of reduction of ICP was longer, that is, the degree of reduction was 24~60 minutes after injection of steroid. Hyperventilation is effective in the initial time only, for 10 minutes after hyperventilation. The degree of ICP reduction was 13.5~16.7% for 10 minutes after hyperventilation. The combined group, that is three kinds of mangenent were used, is the most effective treatment to reduce ICP of ICP. The degree of the reduction of ICP was 42.1~49.3% for 20 minutes, 47.7~52.5% for 30minnutes. There was no significant difference between ligation and non-ligation group.

• Journal of the Korean Dietetic Association
• /
• v.6 no.2
• /
• pp.71-78
• /
• 2000

Environmental pollution induced by food wastes is considered as one of very serious problems in the world, and it is the most important to reduce the production of food wastes. In this study, environmental campaign for reducing food waste was conducted by applying various campaign methods using such as a bulletin board, intra-network, slogans & posters and news letters, as well as some systems such as penalty and prize in a business & industry foodservice. We investigated customers' recognition and execution degree before and after environmental campaign for the purpose of analyzing the changes of customers' attitude by the campaign. The subjects of this study had generally high level of recognition of environmental problem(3.09 point) compared to the execution degree(1.88 point)(Max. 5 points), implying necessity for the induction of actual execution of food wastes reduction by continuous environmental campaign. After environmental campaign, the recognition of environmental problem related to food wastes was significantly increased from 3.09 point to 3.29 point (p<0.001), and the execution degree for food wastes reduction was also greatly increased from 1.88 to 2.70 point (p<0.001). These changes indicated that campaign for food wastes reduction has raised customers' recognition and execution for environmental protection.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.1
• /
• pp.45-54
• /
• 2009

Reduction reactivity and carbon deposition characteristics of three oxygen carrier particles(OCN01, OCN02, OCN03) have been investigated by using hydrogen, methane, syngas, and natural gas as fuels. For all particles, the maximum conversion, the oxygen transfer capacity, and the degree of carbon deposition increased as the reactive carbon contents increased. The reduction rate and the oxygen transfer rate increased as the moles of required oxygen per input gas increased. The change of maximum conversion, reduction rate, oxygen transfer capacity, oxygen transfer rate and degree of carbon deposition for different fuels can be explained consistently by using parameters such as the reactive carbon contents and the moles of require oxygen per input gas.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.6
• /
• pp.807-818
• /
• 2004

The antibacterial activities of several types of chitosan were measured against Staphylococcus aureus and evaluated for their application to antibacterial textile finishing. The ％ reduction of bacteria of the chitosans prepared in our laboratory were between 72 and 87%. The two water-soluble chitosans with molecular weights 1,000 and 3,000 did not show antibacterial activities. The deacetylation of chitosan was appeared to increase antibacterial activity. The ％ reduction in bacterial density of the 86％-deacetylated chitosan solution was 56% where that of the 76％-deacetylated chitosan solution was only 17％ at 0.1% chitosan concentration. Molecular weights of the chitosans seemed not to affect antibacterial activities of chitosans. The antibacterial activity of the acid-soluble, 86%-deacetylated chitosan with 4 cps showed 98% of the ％ reduction at the level of 0.2％ chitosan. The ％ reduction of bacteria of this chitosan was higher at the higher concentration of acetic acid in the chitosan-bacterial mixture. The antibacterial activity was increased with the pH change over the range of 4.0 to 6.5. The 100% of the ％ reduction of bacteria was achieved within 4 hour incubation of the chitosan-bacterial mixture. According to the data obtained from the above experiments, the four chitosans among the six prepared in our laboratory were proved to be valuable for antibacterial textile finishing.