• 소음진동
• /
• 제4권2호
• /
• pp.209-219
• /
• 1994

Classical method calculates the resonance frequency of Helmholtz resonator by postulating that there is a moving mass in neck and a stiffness which expresses the compressibility of cavity. This has been widely accepted as reasonable to determine the resonant frequency, provided that the wave length of interest is longer that any length scale of resonater. Nevertheless, it has been often recognized that this classical method sometimes does not well predict the resonant frequency. This paper decribes the way in which the dynamics of resonator very often does care about the detail geometries of resonator; location of the neck, diameter ratio of the neck to that of cavitty, length of resonator compared with that of neck, etc. This rather unexpected observations have been proved theoretically; 3 dimensional analysis of acoustic wave equation, as well as experimentally by comparing the resonant frequencies, transmission loss, and insertion loss of resonator.

• 대한방사선치료학회지
• /
• 제2권1호
• /
• pp.31-40
• /
• 1987

In the case of designing a high dose rate remote controlled afterloading treatment room with existing hospital facilities. We must construct the effective protective barriers so as to reduce the primary and scattered radiation up to the maximum permissible dose level. It is difficult to reinforce the barrier thickness of the shielding requirements because of the limited space and the problem of the existing building structure at the surrounding area. Therefore we can reduce the intensity of primary radiation to the required degree at the location of interest with installing the appropriate I shaped Pb barriers between the radiation source and the shielding wall of the concrete. As a result, it was possible to reduce the intensity of the primary radiation below the M.P.D level by using additional Pb barriers instead of increasing thickness of concrete wall.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.71-73
• /
• 2008

The development of polymer/inorganic nanocomposites has attracted a great deal of interest due to the improved hybrid properties derived from the two different components. Various nanoscale fillers have been used to enhance polymer mechanical and thermal properties, such as toughness, stiffness, and heat resistance. The effects of the filler on the final properties of the nanocomposites are highly dependent on the filler shape, particle size, aggregate size, surface characteristics, polymer/inorganic interactions, and degree of dispersion. In this paper, we describe the influence of different $CaCO_3$ dispersion methods on the thermal properties of polyethylene terephthalate (PET)/$CaCO_3$ composites: i.e., the adsorption of $CaCO_3$ on the modified PET surface, and the hydrophobic modification of the hydrophilic $CaCO_3$ surface. We prepared PET/$CaCO_3$ nanocomposites using a twin-screw extruder, and investigated their thermal properties and morphology.

• 한국생산제조학회지
• /
• 제18권5호
• /
• pp.491-497
• /
• 2009

Of all of pneumatic components utilized in the make up of pneumatic circuits on either automatic assembly machine or industrial equipment, the pneumatic cylinder is more oriented toward being a structural as well as a pneumatic member. The structural design must be based to a large degree on the end of application of the cylinder on the equipment it is operating. In this paper, design studies of a double-acting pneumatic cushion type cylinder with low-friction and high-speed driving have been developed. Of interest here is to investigate the stress and strain analysis of cylinder tube, piston rod, end cover, and to analyze the buckling of piston rod. A finite element analysis is carried out to compute the distribution of the displacement, stress and safety factors by using ANSYS. As a result, the structural safety factors of each parts in pneumatic cushion cylinder are evaluated and confirmed at the design specifications.

• International Journal of Automotive Technology
• /
• 제8권4호
• /
• pp.521-531
• /
• 2007

Measurement of the vibration transmitted through rotating shafts such as half shafts in vehicles is of interest in applications such as noise transfer analysis and the study of operating deflections. Vibration signals transmitted through a rotating shaft usually include six degree-of-freedom components, thus making the measurement of vibration a challenging task. In the present work, a new measurement method is presented, one that resolves the minimum of only two one-axis accelerometer signals into all components of vibration with reasonable accuracy. The method utilizes the Dopplerized signals obtained from accelerometers attached to a rotating shaft and a Void-Kalman order tracking filter to decompose signals into orders of different vibration components. The new method proposed in the present work is verified by simulated run-up test data and applied to an experimentally obtained data set.

• 한국음향학회지
• /
• 제7권4호
• /
• pp.13-21
• /
• 1988

몇몇 실제적인 경우에 나타나는 선형 여파기의 단점을 보완하기 위해, robust 추정량의 하나인 순서 추정량에 근본을 둔 비선형 여파기를 구현하였다. 특히 WIlcoxon여파기와 확장 WIlcoxon여파기의 특성을 조사하였고, 이상적인 edge 입력 및 좁은 pulse입력에 대한 이들 여파기의 성능을 분석 검토하였다.

• 한국실내디자인학회논문집
• /
• 제13권2호
• /
• pp.176-183
• /
• 2004

This research is aimed at being a cornerstone to elicit the evaluation methodology of systematic and objective lighting design process on the basis of investigation of documentation and interviews on lighting design of architecture which is drawing more and more attention in an architectural field. In evaluating lighting design in architecture, such factors as appropriate illumination, quality of light, completion degree, reflection of use, visual amenity, understanding, amiability, artistic value, recognition, regional conditions, and extent of glare are to be more considered than anything else. In so far as general sectors of society show ever-increasing interest in lighting design, developments in both its quality and its quantity are also expected; thus, evaluation items shown in this research will be useful in appraisal of interior and exterior lighting of architecture.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1230-1235
• /
• 2008

Of all of pneumatic components utilized in the make up of pneumatic circuits on either automatic assembly machine or industrial equipment, the pneumatic cylinder is more oriented toward being a structural as well as a pneumatic member. The structural design must be based to a large degree on the end of application of the cylinder on the equipment it is operating. In this paper, design studies of a double-acting pneumatic cushion type cylinder with low-friction and high-speed driving have been developed. Of interest here is to investigate the structural analysis of cylinder tube, piston rod, end cover, and to analyze the buckling of piston rod. Also, a relief valve type cushion mechanism is considered. This cushion mechanism is found to be adequate under a high-speed driving of pneumatic cylinders.

• 분석과 대안
• /
• 제2권2호
• /
• pp.143-162
• /
• 2018

This paper focuses on the policy framework about "Quantitative and Qualitative Easing (QQE)" of Japan, and analyzes reasons why the policy goal was not reached. The QQE was introduced by the Bank of Japan in 2013 with the purpose of meeting the price stability target of 2% and getting out of deflation that prevents sustained price decline. However, despite the implementation of the bold monetary easing policy unprecedented in the world, the policy goal was not achieved as of June 2018. As a result of analyzing the causes, the following three structural factors were confirmed. 1) The rise in prices by QQE was limited because Japan's consumer price is strongly depending on import price. 2) The effect is high degree of uncertainty and limited because theoretical framework of reflationist which adopted QQE depends on "expectation formation" by "self-fulfilling expectation" and "multiple equilibria". 3) It was confirmed that the expansion of the monetary base did not lead to money stock due to the existence of Japanese liquidity trap, long-term low interest rate policy.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.139-147
• /
• 2000

This paper studied two factors for the manufacturing companies whose number of employee are under three hundred. One is the effect of the observation of quality system under the CEO's interest degree of quality management. First, most of company answered acquiring certificate ISO 9000 is very helpful for the company management .therefore the company have competence for the change of economic environment of domestic and international economy. Second, after acquiring the certificate ISO 9000, there were many improvements in company culture, quality control and business process productivity. As a result, acquisition of certificate of ISO 9000 system makes the company culture preparing the future to become a world first class company.