• 한국항공운항학회지
• /
• 제23권1호
• /
• pp.56-61
• /
• 2015

Because of kinematic complexities, nonlinear behavior, etc, the performance of oleo-pneumatic landing gear is predicted by qualified commercial softwares. While commercial softwares predict more exactly, it takes a long time to construct or modify a model. At initial design stage, design parameters can be determined quickly and exactly enough with simple 2 degree of freedom model of mass, spring and damping. 2 degree of freedom model can be easily applied to optimization and reliability analysis which takes repetitive computation. In this paper, oleo-pneumatic landing gear is modeled as a nonlinear 2 degree of freedom model. The analysis are compared with landing gear drop test. To determine design parameter, optimization problem is solved with genetic algorithm and 2 degree of freedom model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.190-197
• /
• 2002

A new design methodology is presented for the multi-degree-of-freedom vibration absorber for an elastically suspended rigid body with planes of symmetry in general motion. Unlike the common single degree-of-freedom vibration absorber, the presented methodology makes use of both linear and rotational properties of the absorber. It is suggested that an absorber is designed separately for the in-plane and out-of-plane vibration modes and thereby combined the two cases for a six-degree-of-freedom absorber. The nine possible design methods are suggested for the six-degree-of-freedom absorber when an elastically suspended rigid body has one, two, or three planes of symmetry.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2093-2098
• /
• 2005

In this paper, $H_{2}$ designs for the one-degree-of-freedom decoupling control systems are treated for the generalized plant. The optimal $H_{2}$ controller is obtained together with the ones that yield finite $H_{2}$ cost functions under compact assumptions. It is shown that the optimal closed transfer matrix is strictly proper under the reasonable order assumptions on the generalized plant.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1541-1543
• /
• 2013

This paper presents a spherical motor which can control in multi-degree of freedom operation. The spherical motor has been researched by many types of structure. Thhis paper shows a spherical shaped airgap and surfaced permanent magnets. Especially, The motor consists of dual rotor cores. Unlike a cylindrical motor, the spherical motor design can be considered with azimuth direction on spherical coordinates. Therefore the permanent magnet surfaced on the rotor need to be designed optimally in order to generate a sinusoidal magnetic flux density in the airgap. This paper presents results of optimal design for reducing torque ripple of the multi-degree of freedom spherical motor.

• Earthquakes and Structures
• /
• 제7권6호
• /
• pp.1071-1091
• /
• 2014

Pounding of adjacent structures are always a notable reason for damages after strong ground motions, but it is already unforeseen detail in newly constructed structures. Thus, several approaches have been proposed in order to prevent the pounding of structures. By using optimally tuned mass dampers, it is possible to decrease the displacement vibrations of structures. But in adjacent structures, the response of both structures must be considered in the objective function of optimization process. In this paper, two different designs of Tuned Mass Dampers (TMD) are investigated. The first design covers independent TMDs on both structures. In the second design, adjacent structures are coupled by a TMD on the top of the structures. Optimum TMD parameters are found by using the developed optimization methodology employing harmony search algorithm. The proposed method is presented with single degree of freedom and multiple degree of freedom structures. Results show that the coupled design is not effective on multiple degree of freedom adjacent structures. The coupled design is only effective for rigid structures with a single degree of freedom while the use of independent TMDs are effective on both rigid and flexural structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.605-610
• /
• 1994

Optimal design of fault-tolerant, spatial type maniplators is treated in this paper. Design objective is to guarantte three degree-of-freedom translational motions in the task space, upon failure of one arbitrary joint of 4 degree-of -freedom manipulators. Realizing the nonfault-tolerant characteristics of current, wrist-type industrial manipulators, several 4 degree-of-freedom redundant structures with one joint redundancy are suggested as the fault-tolerant spatial -type manipulators. Fault-tolerant charactersitics are investigated basedon the analysis of the self-motion and the null-space elements, of a redundant manipulator. Finally, in order to maximize the fault-tolerant capability,optimal design is performed for a spatial-type manipulator with respect to the global isotropic index, and the performance enhancement of the optimized case is shown by simulation.

• 한국정밀공학회지
• /
• 제13권4호
• /
• pp.97-108
• /
• 1996

Optimal design of fault-tolerant, spatial type redundant manipulators is treated in this paper. Design objective is to guarantte three degree-of -freedom translational motions in the task space, upon failure of one arbitrary joint of 4 degree-of-freedom manipulators. Noticing the nonfault-tolerant characteristics of current, wrist-type industrial manipulators, five different fault-tolerant spatial-type manipulators which have 4 degree-of-freedom structures with one joint redundancy are suggested. Faault-tolerant character-sitics of two redundant manipulators anr investigated based on the analysis of the self-motion and the null-space elements. Finally, in order to maximize the fault-tolerant capability, optimal design is performed for a spatial-type manipulator with respect to the global isotropic index, and the performance enhancement of the optimized case is shown by simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.421-421
• /
• 2000

In this paper, robust two-degree-of-freedom controller for satellite antenna system which tracks reference signal is designed. Two-degree-of-freedom controller consists of a prefilter and a feedback controller to solve trade-off between robust stability and command response. The feedback controller is designed from specifications like stability, disturbance rejection and robustness via H$_{\infty}$ design technique. In the sequel, H$_2$ optimal prefilter is introduced to improve the command response. This suggests a two-step design, with different types of performance specifications at each stage. In practical problems, this may easily lead to a prefilter of unacceptably high order. In order to avoid high order prefilter we use a particular structure in which both the prefilter and the feedback controller share the same dynamics. H$_2$-prefilter technique proposed in this paper is verified by simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1304-1307
• /
• 1996

In this paper, we present a robust Two Degree of Freedom (TDF) $H_{\infty}$ controllers for a missile system. The feedback controller is designed to meet robust stability and disturbance rejection specifications while the prefilter is used to improve the robust model matching properties of the closed loop system. As the perturbed model, we use the normalized coprim factor perturbations. These controllers are designed using $H_{\infty}$ optimization procedures, and applied to a missile model via simulation.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권9호
• /
• pp.495-503
• /
• 2000

In this paper we propose a design procedure of loop-shaping two-degree-of-freedom H$\infty$ digital controller for sampled-data system. We extend the continuous time loop-shaping two-degree-of-freedom H$\infty$ control problem to sampled-data system. The configuration of generalized plant is modified for sampled-data system. And then using continuous lifting we obtain the digital controller. In the final stage of loop-shaping procedure the problem of absorbing weighting functions is discussed. We summarize this study to the design procedure and illustrate the application for an inverted pendulum on the cart.