• Macromolecular Research
• /
• 제17권8호
• /
• pp.585-590
• /
• 2009

The cure behaviors, dielectric characteristics and fracture toughness of diglycidylether of bisphenol-A (DGEBA)/poly(ethylene terephthalate) (PET) blend system were investigated. The degree of conversion for the DGEBA/PET blend system was measured using Fourier transform infrared (FTIR) spectroscopy. The cure kinetics were investigated by measuring the cure activation energies ($E_a$) with dynamic differential scanning calorimetry (DSC). The dielectric characteristic was examined by dielectric analysis (DEA). The mechanical properties were investigated by measuring the critical stress intensity factor ($K_{IC}$), critical strain energy release rate ($G_{IC}$), and impact strength test. As a result, DGEBAIPET was successfully blended. The Ea of the blend system was increased with increasing PET content to a maximum at 10 phr PET. The dielectric constant was decreased with increasing PET content. The mechanical properties of the blend system were also superior to those of the neat DGEBA. These results were attributed to the increased cross-linking density of the blend system, resulting from the interaction between the epoxy group of DGEBA and the carboxyl group of PET.

• Nuclear Engineering and Technology
• /
• 제33권2호
• /
• pp.184-191
• /
• 2001

The effects of ${\gamma}$-irradiation on the crosslinking of high density polyethylene (HDPE) was investigated for the purpose of obtaining a suitable formulation for heat shrinkable materials. In this study the HDPE specimens were prepared by blending with cross linking agents and pressed into a 0.2 mm sheet at 18$0^{\circ}C$. ${\gamma}$-irradiation was conducted at 40 to 100 kGy in nitrogen. The heat shrinkable property and thermal mechanical property of the HDPE sheets have been investigated. It was found that the degree of crosslinking of the irradiated HDPE samples were increased with irradiation dose. Compared with the HDPE containing triallylisocyanurate, the HDPE containing trimethylol propane triacrylate shows a slight increase in crosslinking density. The heat transformation and dimension change of HDPE decreased with increasing radiation dose. The heat shrinkage of the samples increased with increasing annealing temperatures. The thermal resistance of HDPE increased upon the crosslinking of HDPE.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1393-1395
• /
• 1997

In order to investigate the interfacial effects on the aging of power cables, we analyzed recently failed cables using characterization techniques. In this study, some cables showed a convolution which can cause the concentration of electric field and carbonized impurities at the surface of insulation. Also there is a relation between the degree of cross- linking and volume resistivity. From the hot oil test, the sites of water tree and void coincided with each other.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.255-256
• /
• 2022

We synthesized catechol-conjugated chitosan (CCC) to study its usefulness as a construction material additive in cement mortar. The degree of catechol conju-gation (DOC_cat) of the synthesized CCC was determined to be approximately14% by UV-vis and ¹H NMR spectroscopy. Furthermore, the hydroxyl and amine groups in CCC could play a crucial role in hydrogen bonding, metal coordination, and cross-linking processes via interaction with adducts from cement mortar. In this study, we observedanimprovement in the compressive strength and absorption rate, suggesting that CCC is a promising candidateforhigh-performance cement mortar.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4035-4040
• /
• 2012

Presented study describes the synthesis of photo cross-linkable and water soluble hydroxyethyl starch hydroxyethyl methacrylate (HESHEMA) samples with different degree of substitution (DS) by functionalization of hydroxyethyl starch (HES) with hydroxyethyl methacrylate (HEMA) or hydroxyethyl methacrylate carbonylimidazole (HEMACI) in DMSO using two different routes. It was revealed that the reaction time for HESHEMA synthesis can be reduced from 5 days to 24 h by conducting the reaction at $80^{\circ}C$ instead of at room temperature. Solubility of HESHEMA was found to be dependent on DS which in turn was dependent on ratio between HES and HEMA or HEMACI. HESHEMA samples with DS > 0.24 depicted insoluble in water, whereas the samples with DS < 0.05 did not form appreciable gel. HESHEMA samples with appropriate DS were converted into hydrogels by cross-linking polymer chains under UV radiations and resulting HESHEMA hydrogels showed swelling up to 1200%. Application of HESHEMA in controlled drug delivery was investigated by diffusion based encapsulation of Ondansetron, a serotonin 5-$HT_3$ receptor antagonist drug, mainly used for nausea and vomiting treatment.

• 멤브레인
• /
• 제16권4호
• /
• pp.286-293
• /
• 2006

다공성 비대칭막인 polinylidene fluoride (PVdF) 기질막을 상전환법으로 제작하였다. Styrene과 divinyl-benzene (DVB)의 비율을 달리하여 가교시킨 후 술폰산 용액인 황산을 사용하여 $SO_3{^-}$기를 도입시켜 최종적으로 PVdF 이온전도성 복합막을 제작한 후 FTIR, SEM, EDS로써 $SO_3{^-}$기를 확인하였다. 가교도가 증가할수록 용매의 함유율이 감소하였으며, 이온교환용량도 감소하였다. 또한 전기전도도 및 메탄올 투과도도 가교도의 증가에 따라 감소하였으나 Nafion 117보다 우수한 값을 나타내었다. DVB 함량이 8%일 때 $5.58{\times}10^{-5}S/cm$의 전기전도도로써 Nafion 117과 유사한 전기 전도도($6.03{\times}10^{-5}S/cm$)를 나타내었으나 Nafion 117보다 낮은 메탄올투과도($1.0{\times}10^{-6}cm^2/sec$)를 보여 주었다.

• 한국농공학회논문집
• /
• 제59권5호
• /
• pp.1-15
• /
• 2017

In this study, we visualized the regional migration in Korea from 2001 to 2015 using the Chord diagram which can represents amount of migration and flows at the same time. In addition, we constructed a migration network and analyzed the degree centrality of each region for identifying the main regions linking to various regions. In 2001~2005, most of population moved into Geonggi from various regions. However, the capital function was transferred to Sejong in 2011~2015, and population moving into Sejong and Chungnam was increased significantly. The main outflow of population in migration network were shown at the regions in Jeonbuk and Gyeongbuk province in 2001~2004, and recently the regions in Gyeongnam, Gyeonggi, and Seoul were identified as the main nodes in terms of outflow of population. We also focused on migration in rural area through degree centrality, and cord diagram in Chungnam, Jeonbuk, and Jeonnam where include the representative crop area. In 2015. there was the significant increase of migration from Gyeonggi to Chungnam, and internal migration within Jeonbuk increased rather than cross-border migration. In addition, migration from Jeonam to capital area decreased in 2015 but migration among cities within Jeonman increased. In particular, Yesan-gun showed the significant migration to other cities in Jeonnam. Population is necessary to develop community and sustain economic growth in rural regions. Therefore, migration is important for the transfer of manpower. The strength of this study is to approach the temporal change of migration from the viewpoint on quantitative and structural characteristics.

• 한국잠사곤충학회지
• /
• 제41권3호
• /
• pp.185-195
• /
• 1999

This study was carried out to improve the skin care property of the polyester fabric by finishing with sericin. It was known that skin care function, anti-oxidation, anti-tyrosinase activity and anti-elastase activity can be achieved from sericin finish. But, the moisture regain of the finished fabric was measured simply, because the major cause of the discomfort from polyester fabric has been anounced to be wetness. The effects of various treatment conditions on the properties of the finished fabric were measured, and obtained results were as follows: 1. The moisture regain at 40$^{\circ}C$ 90% RH were increased with the sericin uptake increasing. while it was not significant for the effects on the moisture regain depending on the treatment conditions like the degree of polymerization and treatment concentration of the binder. The moisture release of the fabric having sericin uptake 1%, 2% was faster than non treated fabric. The change of the moisture regain of the finished fabric from 40$^{\circ}C$ 90% RH to room temperature was 4∼5 times higher than that of knitted cotton fabric. 2. The frictional static charge was decreased with the degree of polymerization of the binder increasing. While the sericin uptake and treatment concentration of the binder were not significant. 3. The whiteness value of the fabric was slightly decreased by finishing with sericin and binder. In that cases, W values of the finished fabrics were above 90 while that depending on the degree of polymerization of the binder was not significant. 4. The major cause of the yellowness of the finished fabric was proved to be catalyst. The yellowness of the finished fabric with sulfur containing catalyst was lower than that with amine group containing catalyst. 5. The effects of the treatment concentrations of the cross-linking agent, catalyst and drying time on the wash durability were not significant.

• Elastomers and Composites
• /
• 제42권4호
• /
• pp.217-223
• /
• 2007

결정성을 갖는 에틸렌프로필렌디엔 고무($Nordel^{(R)}$ IP)를 과산화물로 가교시키고 열적, 기계적특성과 형상기억거동을 조사하였다. 겔함량 측정결과 가교도는 DCP 함량에 따라 증가되었으며, DSC 분석결과 가교된 고무는 결정상이 존재하고 있음을 알 수 있었다. 인장시험 결과가교도가 증가함에 따라 고무의 모듈러스는 증가되며 파단신율은 감소되었다. 이와 같이 가교구조 내에 결정상을 함유하는 고무는 우수한 형상기억 특성을 나타내었다. 즉, 이러한 고무는 결정상의 용융온도 이상에서 쉽게 원하는 형태로 변형되고, 변형된 상태에서 냉각시키면 변형된 형태로 잘 고정되었으며, 또한 이렇게 변형된 형상의 시료를 용융온도 이상으로 가열하면 원래의 모양으로 신속히 되돌아오는 것을 관찰할 수 있었다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.207-210
• /
• 2004

The pore-filled anion-exchange membranes were prepared in this study with an asymmetric poly(vinylidene fluoride)(PVDF) membrane as a nascent membrane and poly(vinylbenzyl chloride)(PVBCl) as a polyelectrolyte. The solution of PVBCI having the chloromethylate aryl ring of 80 percents and 1,4-diaminobicyclo [2,2,2]octane(DABCO) was made with the solvent of tetrahydrofuran(THF) and N,N-Dimethylformamide(DMF), which is in the rotio of 8:2. A new preparation method in this study, i.e. in-situ crosslinking, enabled us to produce the pore-filled membranes without change of size, and to control the properties of final membrane with various degree of cross-linking. From the result of surface morphologies of SEM and AFM the polyelectrolyte exists in the pores of nascent membrane as a certain configuration. From the investigation of the solvent affecting much to the permeability and rejection, it was found. that the membranes using DMF and THF showed better performances than the membranes produced by THF only. The water permeability of the final membrane at low pressure(100㎪) showed a typical ultrafiltation membrane's permeability (8-10kg/㎡hr) and good values of rejection(55∼60 percent).