• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.33.2-33.2
• /
• 2018

현재 업계에서 사용 중인 대부분의 탈지제는 중온 및 고온에서 사용하는 제품이 많으며, 거품의 발생 또한 많으므로 소포제를 넣지 않고서는 사용이 불가능한 약품이 대부분이다. 탈지제 거품의 발생은 탈지제의 세정력을 높이기 위해 주로 사용되는 음이온성 계면활성제의 특성에 의해 나타나게 되는데, 본 연구에서는 음이온성 계면활성제를 사용하지 않음으로 기포의 발생을 억제하고, 동시에 상온에서 사용할 수 있는 약품을 개발함으로써 생산 공정에서의 원가절감과 신뢰성 및 양산성의 향상을 도모하는데 그 목적이 있다.

• Journal of the Korean Chemical Society
• /
• v.64 no.3
• /
• pp.153-158
• /
• 2020

With the recent popularity of mobile devices, the demand for lithium-ion batteries is increasing. In this study, the surface treatment process for the development of the Al (aluminum) lead tab for positive electrode, a key component of the pouch-type lithium-ion battery, was investigated. Anodizing and sealing processes were tested as surface treatment techniques. It was found that only a sealing process is needed to obtain sufficient adhesive strength. In the present study, an adhesive strength of 17 N/12 mm was achieved by degreasing and etching pretreatment, followed by a sealing process of 10 min duration. This adhesive strength was greater than that achievable using Cr (chromium) surface treatment. Using various surface analysis techniques, the shape and composition of the surface before and after being subjected to the surface treatment were compared and analyzed. The results of this study are expected to contribute to the development of an eco-friendly lead tab.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.2
• /
• pp.176-184
• /
• 2003

New lubricant film of organic and inorganic composite resin was developed to improve the press formability of galvannealed steel sheets (GA) for automotive body panels. The frictional coefficient of lubricant GA steel sheets is about 20% superior to that of uncoated GA. The current range of spot welding of lubricant GA is similar to that of the uncoated GA, but the burning trace of spot welding is inferior to that of the uncoated GA in the oiling condition. The alkaline degreasability of lubricant GA shows 100% in alkaline degreasing condition of automotive company. The size and shape of the phosphated coating layer are similar to those of the uncoated GA sheet. The powdering property of the lubricant GA gives rise to 20∼50% improved property compared with the uncoated GA sheet.

• Corrosion Science and Technology
• /
• v.6 no.2
• /
• pp.68-73
• /
• 2007

The toxicity of chromium that is used to impart corrosion resistance to galvanized steel created environmental and health-related concerns and generated a great deal of interest in developing chrome-free treatment coatings. In the present work, organic-inorganic composite coatings were used to coat electrogalvanized steel (EG) sheets for corrosion protection without degrading its weldability property. The new coatings composed of specially modified polyurethane dispersion hybridized with silicate and unique inorganic-organic inhibitors were developed during this work. It was found that about $1{\mu}m$ thickness of coating layer is secure enough in corrosion resistance of flat and formed part even after alkaline degreasing. Overall chemical resistances including fingerprint resistance and paint adhesion property were satisfied with the test specification of Sony technical standard of SS-00260-2002. Therefore, it is concluded that the newly developed chrome-free product can replace the conventional chromated product.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.1
• /
• pp.110-126
• /
• 1993

Worker exposures to total chromium, hexavalent chromium (VI), sulfuric acid and alkaline dust at electroplating operations and worker exposures to trichloroethylene (TCE) and methyl chloroform (MCM) at degreasing operations in eleven small industrial plants were evaluated. Appropriate local exhaust ventilation systems for both operations were designed and recommended. Results of the study are summarized as follows ; 1. Out of 134 measurements for airborne hexavalent chromium concentrations, seven were exceeding the Korean occupational health standard of $50{\mu}g/m^3$ and 45 were exceeding the NIOSH standard of $1{\mu}g/m^3$. With an exception of one measurement, concentrations of total chromium were below the Korean standard of $500{\mu}g/m^3$. 2. Worker exposures to chromium were closely related to the existing control methods at the electroplating operations. Local exhaust systems, partial coverage of the tank surface, and antifoaming agents on liquid surface were adopted as control methods. 3. With an exception of one sample, airborne concentrations of sulfuric acid and alkaline dusts were below the applicable occupational heatlth standards. 4. Three plants indicated that airborne concentrations of TCE and MCM were exceeding the Korean standards. Other plants showed lower concentrations than the standards. It should be noted that generally, the activities and workloads on the day of surveys were less than normal. 5. Since the most existing ventilation systems did not satisfy the ACGIH criteria, the ventilation systems should be improved. Some examples for designing appropriate ventilation systems are presented.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.2
• /
• pp.26-33
• /
• 2002

Ultimate objective of industrial hygiene is the prevention of health impairment that may result from exposure to chemicals at workplace. Workers in solvent thinner-using occupation environment may be highly exposed to VOCs (volatile organic compounds) because solvent thinner has been used extensively such as painting, spraying, degreasing, coating and so on in Korea. The purpose of this study was to recognize, evaluate, and propose the control methods of VOCs from solvent thinner-using workplace. Five target volatile organic compounds (benzene, toluene, ethylbenzene, o-xylene, and m-xylene) were monitored in H company of Shiwa Industrial Complex and analyzed in perosnal, occupational indoor and outdoor during working hours simultaneously. Engineering control such as local ventilation should be made in considering the long-term exposure, though measured VOCs concentration did not exceed the workplace exposure standards. In addition, air cleaning device should be installed in local ventilation because Shiwa Industrial Complex has had the serious ambient air pollution. Currently, environmental purification using $TiO_2$ photocatalyst have attracted a great deal of attention with increasing number of recent environmental problems. In this study, $TiO_2$ sol coated on the ceramic bead was prepared by sol-gel method and the photodegradation of target compounds was investigated in gas phase by the exposure to UV-A lamp(365nm) in a batch system.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.5 no.1
• /
• pp.61-66
• /
• 2007

Trichloroethylene (TCE) is an unsaturated chlorinated hydrocarbon in the form of a colorless, volatile liquid, which is used as an industrial organic solvent for spot removal and for metal degreasing. In general, the primary complications of TCE poisoning result from involvement of the central nervous and respiratory systems, including aspiration pneumonia. A case is reported of a 54-year-old man who presented in a comatose state after accidental ingestion of 100 ml of TCE, and who recovered after conservative treatment and mechanical ventilation. We discuss this case and present a literature review.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.100-106
• /
• 2007

In this paper, first we went through the deliming and degreasing as pre-treatment of limed pelt scrap which is derived from liming process during leather manufacturing processing. After that, we produced fine collagen using non-chrome tanning and heat treatment and using acryl monomer graft polymerization such as GMA and MMA. From the comparisonof final products made by various methods, they showed good features in pyrolysis temperature, heat-resisting, variation of moisture content and particle distribution.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.105-114
• /
• 1998

In this study, 108 thinners were analyzed to identify their composition. The purposes of this study were to provide the data for MSDS and worker exposure levels. Thinners were collected from manufacturing industries, distributors and users. Wide ranges of thinner components were found ; Toluene, xylene, and ethyl benzene were most often found. Next, MIBK, cellosolve acetate, butyl cellosolve, and butyl acetate were found in 20-40 thinners. Others, such as acetone, n-hexane, cyclohexane, heptane, methylcyciohexane, octane and nonane were also found. There were about 5-6 components in each thinner. In the view point of Industrial Hygiene, Benzene was the most important component of thinners, which procures leukemia. Benzene was found from 8 kinds of thinners out of the total 108 surveyed. Thus, Content of benzene in thinners must be evaluated when industrial hygiene surveys are performed. Aromatic hydrocarbons were identified from 71 kinds of thinners out of total 108 and their contents were 10-87%. Alkanes were not contained in automobile painting, spraying, degreasing, urethane and epoxy thinners but lacquer, enamel and coating thinners.

• Molecular & Cellular Toxicology
• /
• v.4 no.4
• /
• pp.267-277
• /
• 2008

Benzene and ethylbenzene (BE), the volatile organic compounds (VOCs) are common constituents of cleaning and degreasing agents, paints, pesticides, personal care products, gasoline and solvents. VOCs are evaporated at room temperature and most of them exhibit acute and chronic toxicity to human. Chronic exposure of benzene is responsible for myeloid leukemia and also ethylbenzene is also recognized as a possible carcinogen. To evaluate the BE effect on human, whole human genome 35 K oligonucleotide microarray were screened for the identification of the differential expression profiling. We identified 280 up-regulated and 201 down-regulated genes changed by more than 1.5 fold by BE exposure. Functional analysis was carried out by using DAVID bioinformatics software. Clustering of these differentially expressed genes were associated with immune response, cytokine-cytokine receptor interaction, toll-like signaling pathway, small cell lung cancer, immune response, apoptosis, p53 signaling pathway and MAPKKK cascade possibly constituting alternative or subordinate pathways of hematotoxicity and immune toxicity. Gene ontology analysis methods including biological process, cellular components, molecular function and KEGG pathway thus provide a fundamental basis of the molecular pathways through BEs exposure in human lymphoma cells. This may provides a valuable information to do further analysis to explore the mechanism of BE induced hematotoxicity.