• 소성∙가공
• /
• 제23권2호
• /
• pp.82-87
• /
• 2014

The plastic strain ratio is one of the factors that affect the deep drawability of Al alloy sheet. The deep drawability of Al alloy sheet is limited because of its low plastic strain ratio. Therefore an increase in the plastic strain ratio to improve the deep drawability of Al alloy sheet is needed. The current study investigated the increase of the plastic strain ratio and the change in texture of AA5083 Al alloy sheet after a 2 step asymmetric rolling with heat treatments. The average plastic strain ratio of initial AA5083 Al alloy sheets was 0.83. After the first asymmetric rolling step of 88% deformation and subsequent heat treatment at $320^{\circ}C$ for 10 minutes the value was still 0.83. After the second asymmetric rolling of 14% reduction and subsequent heat treatment at $330^{\circ}C$ for 10 minutes the plastic strain ratio rose to 1.01. The average plastic strain ratio after the 2 step asymmetric rolling and heat treatment is 1.2 times higher than that of initial AA5083 Al alloy sheet. This result is related to the development of ND/<111> texture component after the second asymmetric rolling and heat treatment.

• 소성∙가공
• /
• 제33권3호
• /
• pp.178-184
• /
• 2024

In this study, we investigated the effects of extrusion ratio and extrusion temperature on the microstructure and tensile properties of extruded Mg-6Al-0.3Mn-0.3Ca-0.2Y (SEN6) alloy. As the extrusion ratio and temperature increase, dynamic recrystallization during extrusion is promoted, leading to the formation of a fully recrystallized microstructure with increased grain size. Additionally, the increases in extrusion ratio and temperature lead to texture strengthening, exhibiting a higher maximum texture intensity. The extruded materials contain three types of secondary phases, i.e., Al₈Mn₄Y, Al₂Y, and Al₂Ca, with irregular or polygonal shapes. The quantity, size, distribution, and area fraction of the second-phase particles are nearly identical between the two materials. Despite its larger grain size, the tensile yield strength of the material extruded at 450 ℃ and an extrusion ratio of 25 (450-25) is higher than that of the material extruded at 325 ℃ and an extrusion ratio of 10 (325-10), which is mainly attributed to the stronger texture hardening effect of the former. The ultimate tensile strength is similar in the two materials, owing to the higher work hardening rate in the 325-10 extrudate. Despite differences in grain size and recrystallization fraction, numerous twins are formed throughout the specimen during tensile deformation in both materials; consequently, the two materials exhibit nearly the same tensile elongation.

• 열처리공학회지
• /
• 제31권6호
• /
• pp.275-282
• /
• 2018

Two different modes of rolling were applied to control the texture development in tantalum sheet. In the conventional uni-directional rolling, the typical rolling textures of a body-centered cubic metal which was primarily composed of <110>//(rolling direction) was developed. In a cross rolling where the specimen was rotated by $90^{\circ}$ between each pass, the rotated cube components, i.e. {100}<011> were greatly reinforced. The prediction of lattice rotation by the full-constraint Taylor model showed that the high stability and the symmetry of the rotated cube components caused their strengthening in cross-rolling. The two specimens were heated to $1,100^{\circ}C$ at $9^{\circ}C/min$and held for 1 hour for annealing, then cooled to room temperature in atmosphere. In spite of the significant difference in the deformation textures, the annealing textures were very similar. They developed strong <111>//(plane normal) components with negligible intensity at the rotated cube components, which was attributed to the negligible capability of the latter components to provide effective recrystallized grains.

• 보존과학회지
• /
• 제24권
• /
• pp.57-66
• /
• 2008

출토 부분탄화 목제유물은 물성이 다른 부위가 공존하는 것에 의해 박리와 변형이 일어나기 쉬운 것으로 오래전부터 보고되어 왔지만, 실험연구 등을 통한 연구성과는 많지 않았다. 이번 실험에서는 당알코올법과 일반적으로 널리 사용되고 있는 친수성 수지인 Pdyethyleneglycol(PEG)법을 비교 대상 처리법으로 설정하였다. 중량변화율과 수축변화율, 전자현미경(SEM)관찰에 의한 목재조직의 변화양상을 검토한 결과 PEG4000법은 80%이상 농도까지 단계적 함침이 필요하며 Sugar Alcohol(S A)법은 40%농도 함침에서부터 안정적인 양상을 보여 단기간 함침의 가능성을 나타냈다. 본 연구에 사용한 판상 부분 탄화재의 변형은 주로 미탄화부의 수축에 의한 현상으로 생각되며 PEG4000법의 경우 최종 함침농도가 20%, 40%, 60%에서, S A법은 20%농도에 함침한 샘플에서 목재세포조직의 수축이 확인되었다.

• Journal of Biosystems Engineering
• /
• 제37권1호
• /
• pp.28-35
• /
• 2012

Purpose: This study performed the oscillatory test using the texture analyzer to characterize the viscoelastic behavior of apples such as the storage modulus (E'), the loss modulus (E"), the complex modulus (${\mid}E^*{\mid}$) and the energy dissipated per cycle ($W_{diss}$). Methods: The sinusoidal deformation with the frequency of 1-10 Hz and the maximum displacement of 0.1 mm were applied to the flesh tissues of Fuji, Golden Delicious and Red Delicious apples. The Lissajous figure was used to measure the phase angle(${\delta}$) between stress and strain curve. Results: Trigger force was critical to the measurement of the phase angle. E', E", ${\mid}E^*{\mid}$ and Wdiss were measured using the Lissajous figure and the phase angle. The complex modulus of Golden Delicious apple was significantly lower than those of Fuji apple and Red Delicious apple. Conclusions: Apple flesh was exhibiting more elasticity at low frequency, and more viscosity at high frequency. Dynamic compressive properties of Fuji apple were similar to those of Red Delicious apple but significantly different from those of Golden Delicious apple.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문
• /
• pp.73-80
• /
• 1996

Commerical purity aluminium , copper and STS 304 stainless steel sheets are welded by ultrasonic welding. The microstructures, x-ray diffraction profiles of planes , pole figures of the surface of original metal sheets are compared with those of the weld interface. The microstructures show disturbance and dark areas in the weld interface and grain refinement in the vicinity of the interface. The x-ray diffraction intensity of each plane in weld interface decreased in all metal sheets with exception of 9200) in steel sheet. The microstructure and x-ray diffraction intensity is affected by the mixture of deformation, heating and vibratin duringthe ultrasonic welding. Therefore, after the ultrasonic welding, the positions of the peak intensity in the pole figures are changed, the value of the maximum pole intensity is decreased in Al, is increased in copper and stainless steel. Very strong {100} <001> texture, strong {100} <001>,{123}<634> textures in original Al surface are transformed into weak, {100}<001>, {110}<112> and {112}<111> components in weld surface, weak (110) fiber is slightly changed to (110) fiber in copper, (100)and ${\gamma}$ fiber components are transformed into strong ${\gamma}$ fiber component in stainless steel.

• Interaction and multiscale mechanics
• /
• 제2권4호
• /
• pp.375-396
• /
• 2009

In the present work, the elasto-viscoplastic behavior, interactions between grains, and the texture evolution in polycrystalline materials subjected to finite deformations are modeled using a multiscale analysis procedure within a finite element framework. Computational homogenization is used to relate the grain (meso) scale to the macroscale. Specifically, a polycrystal is modeled by a material representative volume element (RVE) consisting of an aggregate of grains, and a periodic distribution of such unit cells is considered to describe material behavior locally on the macroscale. The elastic behavior is defined by a hyperelastic potential, and the viscoplastic response is modeled by a simple power law complemented by a work hardening equation. The finite element framework is based on a Lagrangian formulation, where a kinematic split of the deformation gradient into volume preserving and volumetric parts together with a three-field form of the Hu-Washizu variational principle is adopted to create a stable finite element method. Examples involving simple deformations of an aluminum alloy are modeled to predict inhomogeneous fields on the grain scale, and the macroscopic effective stress-strain curve and texture evolution are compared to those obtained using both upper and lower bound models.

• 한국의류학회지
• /
• 제24권1호
• /
• pp.128-137
• /
• 2000

A range of suede-like samples were collected including woven fabric type, nonwoven fabric type, and natural suede(sheep). The surface textures of these suede-like fabrics are rather diverse and different from the plain filament type fabrics since there are a lot of fine surface free fiber ends. Physical and mechanical measurements were carried using the KES equipments. Based on the Kawabata-Niwa translational equation, primary hand values and THV were calculated. Uniaxial tensile tests were performed. Using glossmeter, the reflectance pattern was analyzed at different incidence and receiving angles. In order to capture the surface images of the specimens, a CCD camera and frame grabber connected to a PC were employed. The reflectance uniformity of the images was measured with line-profile analysis and standard deviation values of the profile of the images were calculated. After the multiscale wavelet transfermation, correlation among the transformed image was analyzed at each scale. The reflectance uniformity of the natural suede was better than that of nonwoven type suede, while that of woven type suede was the last among the selected three samples(natural suede, nonwoven type, woven type). The correlation analysis among images has shown the possibility of using the wavelet transformation of the images as one of the measures to detect similarities among the textured specimens.

• 조명전기설비학회논문지
• /
• 제15권4호
• /
• pp.57-61
• /
• 2001

열간 압연판에 남아있던 {110}<001> 고스 집합조직으로부터 유기된 {111}<112> 냉간압연 집합조직은 기존 발표된 내용들과는 달리, 최종 재결정 집합조직인 {110}<001>고스 집합조직과는 상호 연관성이 없는 것으로 확인되었다. 최종 아닐링하는 동안 표면에 편석된 황의 농도에 따라 표면에너지 유기 선택적 결정성장 현상이 관찰 되었다. 최종 압하율이 작아짐에 따라 초기 생성된 고스 결정립들은 다량의 황이 편석된 범위에서 {100} 또는 {111} 결정립들에 의해 완전히 잠식당하지 않고 살아 남아, 편석이 없는 후반 열처리 시간대에서 완전한 고스집합조직을 형성하는 선택적 결정성장의 기회를 갖게 됨에 따라, 최종적으로는 1.9 Tesla 이상의 우수한 자성 특성을 나타내는 극박 규소강 박대를 얻을수 있었다.

• 마이크로전자및패키징학회지
• /
• 제31권2호
• /
• pp.36-44
• /
• 2024

구리 전해 도금 기술은 반도체 패키징 및 반도체, 이차 전지 등 다양한 마이크로 전자 산업 분야에서 구리 박막 또는 배선의 제조를 위해 사용되고 있으며, 각 응용처에서 요구하는 특성을 획득하기 위해 이들 구리 박막 또는 배선의 미세조직을 제어하고자 광범위한 연구가 이루어지고 있다. 본 연구에서는 기계적 물성이 우수한 이차 전지용 구리 박막을 제조하기 위해, 이차 전지 제조 공정 중 기계적 또는 열적 하중에 의한 박막의 소성 변형 시 박막을 구성하는 결정립들의 결정학적 이방성의 영향성을 조사하였다. 이를 위해, 상이한 집합조직이 발달한 2 종류의 10 ㎛ 두께 전해 도금 구리 박막에 대해 전자 후방 산란 (electron backscattering diffraction or EBSD) 기술을 이용하여 표면 또는 단면의 결정 방위 지도를 측정하였고, 이들을 초기 입력 정보로 한 결정소성 유한요소해석을 통해 1축 인장 변형에 따른 박막 내부의 국부적 변형 거동을 분석하였다. 이를 통해, 인장 변형률의 증가에 따른 박막 내 소성 변형 불균질성과 집합조직의 변화를 추적하였고, 불균질한 소성 변형을 일으키는 결정립의 결정 방위를 확인하였다.