• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.994-1001
• /
• 2012

The Automotive seat is the component related at passenger feeling and safety. It absorbs the impact or vibration and supplies the comfortableness. It must also have sufficient rigidity and strength to satisfy these given conditions. Two kinds of seat models are designed and studied by structural analysis. Seat back frame (b) has lower deformation and fatigue life than (a). Most deformation and damage possibility is shown at the waist, that is the middle of model. On the vibration analysis at which natural frequency is applied, model (a) has the deformation from outside to inside of model, but model (b) has the deformation from inside to outside of model. Model (b) is safer than model (a) structurally at most cases.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.67-72
• /
• 2011

This study had the goal of investigating the effect of the curvature along the heating line on the transverse angular distortion of plates having an initial curvature from line heating. A thermo-elasto-plastic analysis was carried out using 54 models with various radii of curvature, plate thicknesses, and heating speeds. The results show the effect of the curvature along the heating line on the angular distortion in relation to changes in the magnitudes of the curvature, heating speed, and plate thickness. The present numerical results show that the time history of the angular distortion after cooling and reaching the final deformed shape for a plate having an initial curvature is quite different from that of a flat plate. This emphasized the importance of considering the curvature effect on the transverse angular distortion. From the viewpoint of the curvature effect on the deformation, it has been seen that the curvature does not affect the transverse shrinkage. In this study the predicting formula for the transverse angular distortion was derived through a regression analysis. It showed that as the curvature increased, the angular distortion was reduced because of the higher bending rigidity at the same heat input parameter, and the peak points moved toward the origin as the curvature increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.3 s.25
• /
• pp.79-88
• /
• 1987

In order to investigate the hand values and mechanical properties such as tensile, shearing, bending, compression, surface and thickness & weight of the women's summer fabrics were measured by KES-F system. Sorts of 78 commercial fabrics of women's summer cloth were classfied into 43 silk and 35 polyester fabrics according to materials. The experimental results were analysed statistically to relate the hand values and the mechanical properties and concerning to formation of weared clothes and transformation behavior were investigated. The main results are summarized as follows; 1. Polyester fabrics show higher tensile deformation than those of silk fabric. And also polyster fabric has a easy to shape-less and makes a silhouette which goes along with the body. 2. Silk fabrics is superior to polyester fabrics in formation and shear elasticity building box-shaped silhouette. 3. Polyester fabrics show sufficient ability to recover from tending deformation and drapability On the other hand, the compressibility and bending rigidity of silk fabrics were superior to polyester fabrics. 4. Regardless of materials, the bending properties is closely assocsiated with stiffness, anti-drape stiffness and flexibility with soft feeling. Fullness & softness and crispness is primarily influenced by surface properties. There is substantive relationship between scrooping and sheaing properties.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.3
• /
• pp.37-44
• /
• 1997

In this paper, the inelastic behavior of an asymmetric tall building is investigated. The asymmetry in rigidity caused by the structural asymmetry induces torsional as well as lateral deformation. The inelastic analysis of such an asymmetric structure is difficult to carry out with a planar model and thus requires a full three dimensional model. In this paper a 102 story unsymmetric tall building is analized by static push-over procedure and its behavior is investigated. The analysis are performed with and without floor rotation to compare the results. According to the results the static behavior of the model building, as expected, turned out to be dependent heavily an the asymmetry of the plan shapes of the building.

• Structural Engineering and Mechanics
• /
• v.8 no.6
• /
• pp.607-622
• /
• 1999

Being a significant mode of deformation, shear effect in addition to the other modes of stretching and bending have been considered to develop two finite element models for the analysis of beams on elastic foundation. The first beam model is developed utilizing the differential-equation approach; in which the complex variables obtained from the solution of the differential equations are used as interpolation functions for the displacement field in this beam element. A single element is sufficient to exactly represent a continuous part of a beam on Winkler foundation for cases involving end-loadings, thus providing a benchmark solution to validate the other model developed. The second beam model is developed utilizing the hybrid-mixed formulation, i.e., Hellinger-Reissner variational principle; in which both displacement and stress fields for the beam as well as the foundation are approxmated separately in order to eliminate the well-known phenomenon of shear locking, as well as the newly-identified problem of "foundation-locking" that can arise in cases involving foundations with extreme rigidities. This latter model is versatile and indented for utilization in general applications; i.e., for thin-thick beams, general loadings, and a wide variation of the underlying foundation rigidity with respect to beam stiffness. A set of numerical examples are given to demonstrate and assess the performance of the developed beam models in practical applications involving shear deformation effect.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.6
• /
• pp.26-32
• /
• 2019

Ball end mills used for high-speed and high-precision machining require longer machining time than flat end mills or face cutters, since the tool diameter is limited and the rigidity is reduced by the characteristics of the tool's cutting edge: at the top end of the tool, the cutting speed approaches zero and hardly removes any material. Because there is little material removal at the top end of the ball end mill, the outer cutting edge performs the majority of the work; this irregular cutting force deforms the tool and shortens its life. In this study, we attached an eddy-current sensor to a tool to measure the deformation from the cutting force and we used a tool dynamometer to measure the cutting force. We found that the change in cutting force is dependent on the change in feed rate during square-shaped processing and, as the feed rate is accelerated, the cutting force also increases. Higher cutting forces increase tool deformation.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.20-29
• /
• 1995

When structures are constructed by welding, structural elements are always accompained by welding residual stress and deformation. Therefore, when the rigidity and strength of the welded structures is considered, it is very important to have sufficient information about the effect of initial deflection and welding residual stress on them. In this paper, the square plates with welding residual stress under compression are dealt with; First, heat conduction and thermal elastic-plastic problems are analyzed by finite element method using 4-node isoparametric elements for assessment on the ultimate strength of welding joint. Later, the ultimate strength of welding joint is assessed by examining the effect of changed type of loading. The specimens are 500{\times}$500mm(a/b=1) and 750{\times}$500mm(a/b=1.5) rectangular plates of whichthicknesses is 9.0mm and simply supported plates getting axiul load in each direction.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.2
• /
• pp.60-66
• /
• 2004

Finite element method is very effective method to simulate the forming processes with good prediction of the deformation behaviour. In this paper, It was focussed on the drawability factors on the square cup deep drawing by PAM-STAMP with using magnesium alloy to reduce car weight as well as to draw much attention from the viewpoint of environmental preservation high rigidity, In order to predict the effect of drawability factors, the relationships between punch load and punch stroke, the relationships between thickness strain and distance, and are used. According to this study, the results of simulation will give engineers good information to access the drawability of square cup deep drawing at warm temperature.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.78-81
• /
• 2002

To achieve high precision machine totals with high speed, it is needed to develop excellent rigidity statically, dynamically and thermally as well. In this view the chief things that thermal deformation of machine tool structure is directly related to high precision. And thermal behavior for transmission procedure have an effect on high precision. It is needed to exact temperature distribution of each members and all contact elements included for machine tool structure. This paper deals with thermal behavior caused by temperature variation in a high speed feeding process. At this procedure of temperature distribution is estimated using a Predictor-Corrector Method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.619-622
• /
• 2005

Purpose of this study is to investigate the size-dependent mechanical properties in micron scale medium. Theories such as the couple stress theory and strain gradient theory explain that the deformation in the micron scale is dependent upon the size of the medium. Specimens of the cantilever type, bridge type and paddle type beam that have thickness of 900, 1000 and 1200 nm and width of 10, 20, 30 and $50{\mu}m$ were fabricated by the MEMS technique. We carried out the bending and torsion test to measure the mechanical properties such as the young's modulus, yield strength and torsional rigidity using the AFM(Atomic Force Microscopy).