• 한국농공학회논문집
• /
• 제46권5호
• /
• pp.69-77
• /
• 2004

FRP rebar has low bond performance than steel rebar. Usually, FRP rebar has about 60% of bond strength of steel rebar. Without adequate bond to concrete, the full composite action between reinforcement and concrete matrix can not be achieved. Therefore, FRP rebars must also have surface deformations that provide good bond to concrete. The purpose of this research was decided an optimum surface deformation patterns through bond test of FRP rebar. Eighteen surface deformation patterns of FRP rebar with widely different geometries were investigated. Based on the test results, we established optimum surfale deformation pattern. Bond tests were performed for three types of surface deformation patterns of FRP rebar including sand coated rebar, ribbed rebar, and wrapped and sand coated rebar that commercially available, and two types of FRP rebar including CFRP, GFRP rebars that optimum surface deformation pattern is applied. According to bond test results, FRP rebars that optimum surface deformation pattern is applied were found to have better bond strength with concrete than currently using FRP rebar.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.357-374
• /
• 2014

The design basis is being shifted from strength to deformation in modern performance-based design codes. This paper presents a practical method for optimization of eccentrically braced steel frames, based on the concept of uniform deformation theory (UDT). This is done by gradually shifting inefficient material from strong parts of the structure to the weak areas until a state of uniform deformation is achieved. In the first part of this paper, UDT is implemented on 3, 5 and 10 story eccentrically braced frames (EBF) subjected to 12 earthquake records representing the design spectrum of ASCE/SEI 7-10. Subsequently, the optimum strength-distribution patterns corresponding to these excitations are determined, and compared with four other loading patterns. Since the optimized frames have uniform distribution of deformation, they undergo less damage in comparison with code-based designed structures while having minimum structural weight. For further investigation, the 10 story EBF is redesigned using four different loading patterns and subjected to 12 earthquake excitations. Then a comparison is made between link rotations of each model and those belonging to the optimized one which revealed that the optimized EBF behaves generally better than those designed by other loading patterns. Finally, efficiency of each loading pattern is evaluated and the best one is determined.

• 한국의류학회지
• /
• 제34권11호
• /
• pp.1824-1835
• /
• 2010

This study develops tight-fitting torso patterns for performance garments by taking into account the skin deformation generated directly from a 3D scan during arm movements. The skin deformation caused during the arm movements was scanned after scanning the skin surface stamped with a circle. To create a torso pattern in response to skin deformation, the ratio and direction of the skin deformation were first measured and analyzed so that the 3D human body could be segmented. After translating, the 3D skin surface was segmented into 2D flat patterns, designing nude patterns and reducing them as well as tight-fitting shirts: the skin deformation segment shirts were made in response to the skin deformation. The features of the fabric deformation and the garment pressure were analyzed and evaluated. In comparison with a clothing construction segment shirt, the diameter of the skin deformation segment shirt was smaller as well the ratios of extension and reduction was less. The garment pressure of the skin deformation segment shirt was higher. The skin deformation segment shirt fitted more tightly compared to a clothing construction segment shirt as it covered the body more thoroughly and was as comfortable as the other shirts with less fabric deformation made as the body moved.

• 한국기계가공학회지
• /
• 제9권4호
• /
• pp.32-37
• /
• 2010

One of the most common engineering processes using plastics is the injection molding. In addition, plastics are utilized over the entire areas in our life including cars and home appliances among others for their characteristics with no deterioration even after a long time, as well as for their light weights in addition to their good durability. This paper aimed to minimize defects through prior analyses on the weld line, air traps, filling time, molding temperature and deformation patterns among others while carrying out interpretations on the cooling, filling and deformation in the injection process using the moldflow for rear lamp reflectors among components for a car in making parts through the coating process after injection.

• 암석학회지
• /
• 제3권1호
• /
• pp.20-33
• /
• 1994

Some of the seven types of subgrain boundaries (Means and Ree, 1988) in octachloropropane samples show distinctive deformation patterns during their development. Type II subgrain boundaries migrate to accommodate the deformation difference between adjacent grains. The formation of Type III requires a rigid-body roation of grains to reduce misorientation of adjacent grains. Type I, IV, V and VI develop either in static or dynamic condition. Type VII form only in static environments after deformation. Ribbon grains can develop via Type III or Type IV process. The orientation pattern and density of subgrain boundaries are more or less stable through a post-deformation heating. Subgrain boundary orientations are symmetric with respect to the grain-shape foliation in pure shear. In simple shear, their maximum inclines toward the direction of shear.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.1-6
• /
• 2010

Patterned optical components are widely used for optical products such as LCD and lighting. Since CCFL was used as a light source in the products, prism films having linear continuous optical patterns were widely used. However, LED which is a dot light source is popular recently, therefore, the optical products need new optical components having non-continuous optical patterns. Indentation machining method is a powerful method for machining of non-continuous pattern. When a copper mold and a brass mold were machined by this method, severe plastic deformation called pile-up was observed around the patterns. Since pile-up has negative relationship to ductility, this deformation can be eliminated by annealing treatment which makes the materials ductile. No plastic deformation occurred when machined after annealing at $600{^{\circ}C}$ and $575{^{\circ}C}$ for copper and brass, respectively. Finally, non-continuous optical patterns with high quality were machined on a copper mold and a brass mold successively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.209-212
• /
• 2005

This paper presents, basic concepts on deformation models for D-regions critical to shear. Strut-and-tie models are used to construct for deformation estimation at yielding and ultimate deformation. A generic: strut-and-tie model is proposed to investigate deformation patterns and failure mode identification. Superposition of the basic models enables us to explain deformation limits of arch action and truss action. Displacement at yielding is assessed by consideration of deformation of reinforcing steel only while the ultimate displacement is calculated by limits of ultimate strain of concrete in compression and failure mechanisms.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.357-364
• /
• 2000

This paper starts with reviewing general patterns of deformation of the soft ground with by embankment. Correlation between lateral and vertical deformation of soft ground under embankment are analyzed and discussed by comparing the performance of the Yangsan test embankment on treated soft ground with vertical drains.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1439-1450
• /
• 1995

Bellows is a familiar component in piping systems as it provides a relatively simple means of absorbing thermal expansion and providing system flexibility. In routine piping flexibility analysis by finite element methods, bellows is usually considered to be straight pipe runs modified by an appropriate flexibility factor; maximum stresses are evaluated using a corresponding stress concentration factor. The aim of this study is to develop a bellows finite element, which similarly includes more complex shell type deformation patterns. This element also does not require flexibility or stress factors, but evaluates more detailed deformation and stress patterns. The proposed bellows element is a 3-D, 2-noded line element, with three degrees of freedom per node and no bending. It is formulated by including additional 'internal' degrees of freedom to account for the deformation of the bellows corrugation; specifically a quarter toroidal section of the bellows, loaded by axial force, is considered and the shell type deformation of this is include by way of an approximating trigonometric series. The stiffness of each half bellows section may be found by minimising the potential energy of the section for a chosen deformation shape function. An experiment on the flexibility is performed to verify the reliability for bellows finite element.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.191-192
• /
• 2006

The deformation under radial pressure of rectangular dies for metal powder compaction has been investigated by FEM. The explored variables have been: aspect ratio of die profile, ratio between diagonal of the profile and die height, insert and ring thickness, radius at die corners, interference, different insert materials, i. e. conventional HSS, HSS from powders, cemented carbide (10% Co). The analyses have ascertained the unwanted appearance of tensile normal stress on brittle materials, also "at rest", and even some dramatic changes of stress patterns as the die height increases with respect to the rectangular profile dimensions. Different materials behave differently, mainly due to difference of thermal expansion coefficients. Profile changes occur when the dies are heated up to the temperature required for warm compaction. The deformation patterns depend on compaction temperature and thermal expansion coefficients.