• 제목/요약/키워드: deformation amplification

검색결과 29건 처리시간 0.02초

Finite element analysis of ratcheting on beam under bending-bending loading conditions

  • Sk. Tahmid Muhatashin Fuyad;Md Abdullah Al Bari;Md. Makfidunnabi;H.M. Zulqar Nain;Mehmet Emin Ozdemir;Murat Yaylaci
    • Structural Engineering and Mechanics
    • /
    • 제89권1호
    • /
    • pp.23-31
    • /
    • 2024
  • Ratcheting is the cyclic buildup of inelastic strain on a structure resulting from a combination of primary and secondary cyclic stress. It can lead to excessive plastic deformation, incremental collapse, or fatigue. Ratcheting has been numerically investigated on a cantilever beam, considering the current study's primary and secondary bending loads. In addition, the effect of input frequency on the onset of ratcheting has been investigated. The non-linear dynamic elastic-plastic approach has been utilized. Analogous to Yamashita's bending-bending ratchet diagram, a non-dimensional ratchet diagram with a frequency effect is proposed. The result presents that the secondary stress values fall sequentially with the increase of primary stress values. Moreover, a displacement amplification factor graph is also established to explain the effect of frequency on ratchet occurrence conditions. In terms of frequency effect, it has been observed that the lower frequency (0.25 times the natural frequency) was more detrimental for ratchet occurrence conditions than the higher frequency (2 times the natural frequency) due to the effect of dynamic displacement. Finally, the effect of material modeling of ratcheting behavior on a beam is shown using different hardening coefficients of kinematic hardening material modeling.

비 균일한 공극율을 갖는 투과성 원기둥과 파의 상호작용 (Wave Interaction with a Porous Circular Cylinder of Non-Uniform Porosity)

  • 조일형
    • 한국해양공학회지
    • /
    • 제23권6호
    • /
    • pp.23-31
    • /
    • 2009
  • The interaction of incident monochromatic waves with a bottom-mounted vertical porous circular cylinder is investigated using the framework of the three-dimensional linear potential theory. The porosity of the circular cylinder is uniform vertically but varies in the circumferential direction. By adjusting the porosities of the circular cylinder, both the wave blocking performance of a porous semi-circular breakwater and the wave responses inside a circular harbor with an entrance are applied as calculation examples. It is found that the reflected waves, wave run-up, and wave forces are significantly reduced due to wall porosity, which are positive factors for a breakwater, and the amplification factor of a circular harbor at resonant frequencies is greatly reduced by a porous sidewall.

지오그리드로 보강된 철도노반의 한계속도에 관한 연구 (Critical Speed Analysis of Geogrid-Reinforced Rail Roadbed)

  • 신은철;이규진;오영인
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2001년도 추계학술대회 논문집
    • /
    • pp.534-539
    • /
    • 2001
  • This paper presents the critical speed analysis of geogrid-reinforced rail roadbeds on soft soil. A rail roadbed on soft ground must be designed to avoid intolerable stress in the underlying soil and to give sufficient support for the rail system. At high speeds, the deformation of rail systems will gain dynamic amplification, and reach excessive values as a certain speed, here termed critical speed is approached. The elastic Winkler foundation model was used to predict the critical speed of geogrid-reinforced rail roadbeds on soft soil and the model properties were determined by the in-situ cyclic plate load test. Based on the parametric study of elastic beam on Winkler foundation model, the critical speed increase with the increase of the flexural risidity of subgrade EI and the stiffness coefficient of Winkler foundation k. From the in-situ cyclic load tests and analysis of elastic beam on Winkler foundation model, the critical speed increase with increase in number of reinforced layer and non-dimensional value for depth of first geogrid layers and the thickness of reinforced rail roadbed u/d.

  • PDF

해양장파의 증폭과 변형에 대한 연구 (A Study on Amplification and Deformation of Long-Period Waves)

  • 배재석;신충훈;조영준;윤성범
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2011년도 학술발표회
    • /
    • pp.45-49
    • /
    • 2011
  • 본 연구에서는 일본 전력중앙연구소에서 수행된 wave fission 수리모형실험 자료를 토대로 일차원 FUNWAVE 수치모형을 이용하여 wave fission 현상을 재현하는 수치모의를 수행하였다. FUNWAVE 수치모형은 Boussinesq 방정식을 지배방정식으로 사용하고 있으며 파의 분산효과와 비선형 효과를 고려할 수 있는 수치모형이다. 따라서 wave fission의 주된 발생원인인 분산효과와 비선형효과에 대한 고려를 통해 수치모의 결과는 수리모형실험의 관측치와 상당히 잘 일치함을 확인할 수 있었다. 또한, 본 연구에서는 추가적으로 해수의 흐름이 존재하는 경우를 가정하고 수로 내 일정한 유량의 흐름을 추가하여 wave fission 일차원 수치모의를 수행하였다. 수치모의 결과 파의 진행방향과 반대방향으로 흐름이 존재하는 경우 wave fission으로 인한 수면변위의 크기가 상대적으로 증가함을 확인할 수 있었으며 반대로 파의 진행방향과 동일한 방향으로 흐름이 존재하는 경우 wave fission으로 인한 수면변위의 크기가 상대적으로 감소함을 확인할 수 있었다.

  • PDF

브릿지형 힌지 메커니즘을 이용한 압전구동기의 최적화 (Optimization of a Piezoelectric Actuator using Bridge-Type Hinge Mechanism)

  • 김준형;김수현;곽윤근
    • 한국정밀공학회지
    • /
    • 제20권2호
    • /
    • pp.168-175
    • /
    • 2003
  • In this research, a bridge-type flexure hinge mechanism is developed and optimized to amplify the displacement of a multilayer piezostack. Developed hinge mechanism has three-dimensional structure to reduce link size, so it have high amplification ratio with respect to small size. A flexure hinge is assumed to be 6 degree-of-freedom spring elements and matrix methods are used to model a hinge mechanism. To verify derived matrix model, a displacement and frequency experiments are performed. The analysis result shows that the displacemental error between matrix model and experiments is below 10 percents and the deformation of hinge in parasitic direction should be considered In hinge modeling. Using developed matrix model, an optimal design is performed to maximize the performance of hinge mechanism.

고속철도 노반지지조건에 따른 임계속도효과의 동적응답 (Dynamic Response for Critical Velocity Effect Depending on Supporting Stiffness of High-Speed Railway Trackbed)

  • 이일화
    • 한국지반공학회논문집
    • /
    • 제29권1호
    • /
    • pp.5-12
    • /
    • 2013
  • 철도노반에서 임계속도효과는 시간영역에서의 유사-공진현상으로서 차량의 주행속도와 노반표면파의 군속도대역이 중첩되면서 에너지가 증폭되는 현상을 의미한다. 과거에는 열차의 주행속도가 낮고 지반의 군속도가 높았기 때문에 문제가 되지 않았으나, 열차속도가 고속화되면서 임계속도효과가 궤도틀림에 영향을 미치는 것으로 보고되고 있다. 현재까지는 임계속도에 대하여 주로 이론적인 분석만 제시되었는데 실질적인 임계속도효과를 효율적으로 평가하기 위해서는 궤도 및 노반의 지지강성을 현장조건과 유사하게 고려하는 것이 필요하다. 그래서 본 논문에서는 유한요소해석을 이용하여 궤도 및 노반의 지지조건을 고려한 임계속도해석을 수행하였다. 궤도조건은 자갈궤도와 콘크리트궤도로 구분하였으며 노반의 지지강성은 10~300MPa범위에서의 임계속도영향을 평가하였다. 해석결과 노반의 지지강성에 따른 변형증폭을 확인하였으며, 궤도지지조건에 대한 임계속도영향도 매우 큰 것으로 나타났다.

자왜형 초음파 트랜스듀서용 도파봉의 설계 및 제작 (Design and Construction of the Acoustic Horn for Magnetostrictive Ultrasonic Transducer)

  • 강국진;노용래
    • 한국음향학회지
    • /
    • 제20권6호
    • /
    • pp.57-65
    • /
    • 2001
  • 본 연구에서는 자왜형 초음파 트랜스듀서의 도파봉을 이론적으로 해석하고 그 타당성을 유한요소 해석법으로 검증하였으며 두 해석법의 결과는 서로 잘 일치하였다. 본 연구에서 유도한 이론적 해석법은 유한요소 해석법에 비해서 빠른 시간 내에 주어진 주파수를 만족시키는 도파봉 길이를 결정할 수 있는 반면, 차단 주파수 (cut-off frequency)를 넘어서는 범위에서만 해석이 가능하다는 단점을 가진다. 해석결과 현수선 도파봉 (catenoidal horn)이 지수함수 도파봉 (exponential horn)에 비해서 더 큰 변위 증폭을 가져왔고, 현수선 형상 길이가 짧을수록 더욱 큰 변위로 증폭시킬 수 있었다. 해석 결과를 바탕으로 공기중에서 공진 주파수 20.8 ㎑를 가지는 자왜형 초음파 트랜스듀서를 제작하여 성능을 측정하였다. 자왜형 트랜스듀서는 수중에서 19.3㎑의 공진 주파수와 199 dB의 최대 SPL (Sound Pressure Level)을 가지고 무지향성의 특성을 보였다.

  • PDF

호남고속철도 동적 안정성 요구 조건을 고려한 강합성 거더교의 변수 연구 (Parametric Study on Steel composite Girder bridges for HONAM High-Speed Railway Considering Criteria Requirement of Dynamic Response)

  • 조선규;정한욱;김성일
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.1370-1378
    • /
    • 2007
  • 고속철도 교량은 고속주행 열차의 차축 주기하중 효과와 교량 고유의 동적특성에 의한 동적 증폭 효과로 인하여 구조물의 안전성에 영향을 받는다. 그리고 교량의 과도한 변형으로 인하여 차륜과 레일의 접촉력 감소, 궤도틀림 등의 윤중 변동이 일어나 열차의 주행안전성 및 승차감을 저해할 수 있다. 이러한 궤도 안전성을 확보하기 위하여 동적거동에 대한 교량상판수준의 수직가속도 제한, 차륜-레일간의 접촉과 열차주행 안전성 확보를 위한 상판 면틀림 제한, 단부 회전각 변위 제한, 차량하중에 의한 교량의 수직 처짐 제한을 반드시 만족시켜야 하며, 필수적으로 공진에 대한 검토도 이루어져야 한다. 신설되는 호남고속철도에서는 기존의 경부고속철도와 다른 콘크리트 도상을 적용하고, 궤도간격, 설계열차하중 등이 변경되어 적용되므로 새로운 동적안정성 요구조건을 적용하게 된다. 본 연구에서는 콘크리트교량에 비해 진동특성이 취약한 것으로 알려진 강합성 거더 고속철도 교량의 동적거동 분석을 수행하였다.

  • PDF

대형지진시 다층지반의 지진응답해석 (Seismic Response Analysis at Multi-layered Ground During Large Earthquake)

  • 김용성
    • 한국지반공학회논문집
    • /
    • 제18권4호
    • /
    • pp.55-64
    • /
    • 2002
  • 본 논문에서는 점탄-점소성 구성모델을 다층지반에서의 대형지진 발생시의 조건에 적용하기 위해 일본 고베 포트아일랜드에서 발생한 1995 Hyogoken Nanbu 지진에 대한 지진응답 해석을 수행하였다. 지진응답해석 결과 점성토의탄-점소성 모델과 점탄-점소성 모델로 계산된 가속도 기록은 포트아일랜드에서 계측된 가속도 기록과 거의 일치함을 알 수 있었으며, 점성토 지반 부근에서 점탄-점소성 모델과 탄-점소성 모델은 미세하게 다른 거동 특성을 나타내어 점소성 모델의 타당성을 확인하였다. 따라서 동적 점탄-점소성 구성모델은 대변형률 영역에서 점성토의 소성변형을 유발하는 대형 지진 등의 발생시 점성토의 증폭 및 감쇠특성의 파악을 위해 적용가능한 모델임이 입증되었다.

병진운동하는 사각형 유체저장탱크 내부의 슬로싱 특성 연구 (A Study on the Sloshing of the Rectangular Tank Partially Filled with Fluid Under Translational Motion)

  • 이영신;김현수;이재형;고성호
    • 한국소음진동공학회논문집
    • /
    • 제13권8호
    • /
    • pp.591-597
    • /
    • 2003
  • The oscillation of the fluid caused by external motions is called sloshing, which occurs in moving vehicles with contained fluid masses, such as the oil tankers, railroad cars, aircraft and rockets. Natural frequencies of fluid are much lower than that of solid structures, and the deformation caused by the excitation that is less than 1st natural frequency of fluid is very large. For the reason of that, sloshing characteristics under the ekcitation that is less than the 1st natural frequency must be studied prior to the consideration of natural frequencies of fluid. The experimental devices are constructed to simulate the translation motion. The rectangular tanks are made to study the sloshing characteristics under external excitation. The changes of water height are measured using an analogue camcorder and MPEG board, and those are compared to each other through a standard deviation. From the results of experiments, the sloshing is greatly influenced by the length of the rectangular tank than the width of that under the periodic translational motion in the length direction. The rapid amplification of sloshing by resonance is also confirmed experimentally.