• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.7-12
• /
• 2005

The objective of this study is to estimate the mechanical behavior in bending and the anatomical changes of wood under several deflection rates. Sample specimens of water-saturated Japanese cedar (Cryptomeria japonica) were stressed to rupture under several deflection rates. Mechanical properties of wood such as modulus of elasticity, modulus of rupture and stress at proportional limit, and anatomical changes affected by deflection rates were estimated. Microscopic observations on compression side of the test specimens when the specimen was loaded to rupture were carried out by the SEM (scanning electron microscopy). The results are summarized as follows: 1. The mechanical properties of wood were affected by variations of the deflection rates. The modulus of elasticity (MOE), modulus of rupture (MOR) and stress at proportional limit were in proportion to the logarithm of deflection rates. 2. The deflection of wood at rupture in bending increased as deflection rates decreased. 3. The variations of the microscopic deformations of sample specimens were closely related to the deflection of wood at rupture. In case of largely deflected wood by maximum bending load, severe and abundant microscopic deformations were observed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1896-1901
• /
• 2008

Single crystalline copper nanowires are subjected to bending tests using molecular dynamics simulations and the embedded atom method. To observe behaviors of nanowire, bending tests are performed for various rates of deflection and different boundary conditions: fixed-free and fixed-fixed. When the deflection of nanowire becomes large, twinnings and dislocations appear, and <100> crystal structure transforms to <110>. At high rates, phase transformation occurs in whole nanowire. But, at low rates, atomic structure changes to <110> phase partially. The final deformed structures are affected by the rate of deflection and boundary conditions. These effects can be important design parameters at nanoscale.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.732-736
• /
• 2005

Discussion of this study is that a horizontal deflection system satisfactory of operating at horizontal scan rates from 30KHz to 50KHz has been developed. It will be used in the large-area, color, high-resolution and multi-sync rear-projection CRT display device. Its characters, including the description, analysis and deflection circuit loss, are presented.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.101-112
• /
• 2022

Expanding urbanization practices result in high numbers of buildings being developed in city centers. This high building concentration leads to an increased fire risk, resulting in higher casualty rates and increased economic damages compared to fires in the past. The purpose of this study was to analyze the structural behavior of fire-damaged reinforced concrete buildings using analytical methods and to suggest methods of improving fire resistance in the event of a fire. Damage levels were measured using commercial software to apply the finite element method, ABAQUS, and MIDAS GEN to the dataset. Load-deflection curves were calculated using the effective area and moment of inertia of the fire-damaged columns provided by ABAQUS. The results of this analysis indicate that fire-damaged beams with experience greater deflection from indoor fires than they will from outdoor fires. Fires that occurred on the middle floors were more dangerous than those occurring on higher floors, and eccentrically loaded columns experienced more damage than axially loaded columns. The results indicate that these methods accurately predict structural behaviors of fire damaged concrete columns by considering fire exposure area and eccentric loading.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.922-929
• /
• 2006

In this study, flow characteristics of the FPN (Fountain Pen Nano-Lithography) using active membrane pumping are investigated. This FPN has integrated chamber, micro channel, and high capacity reservoir for continuous ink feed. The most important aspect in this probe provided control of fluid injection using active membrane pumping in chamber. The flow rates in channel by capillary force are theoretically analyzed, including the control of mass flow rates by deflection of membrane. The above results are compared with numerical simulations that calculated by commercial code, FLUENT. The velocity of fluid in micro channel shows linear behaviors. And the mass flows are proportional to the second order function of pumping pressure that is imposed to membrane.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.316-325
• /
• 1986

본 연구에서는 이상배합조직강에 있어서 피로균열진전거동의 미시조직 의존 성을 밟히기 위하여 제이상 마르텐사이트가 모상 페라이트를 둘러싼 마르텐사이트페라 이트 복합조직강을 준비하고 미시조직이 각각 다른 4종류의 시험편에 대하여 피로시험 을 실시한후 이에 의해 얻어진 피로균열진전속도를 균열휨과 균열닫힘을 통하여 검토 하였다.

• 한국재료학회지
• /
• 제10권5호
• /
• pp.364-368
• /
• 2000

섬유강화 세라믹스 복합재료의 파괴예측 가능성을 알아보기 위해서 탄소섬유와 WC분말입자를 전기 전도상으로 이용하여 재료 스스로가 파괴예측 기능을 가지도록 한 SiC섬유강화 $Si_3N_4$세라믹스기 복합재료를 1773K에서 1시간 동안 hot-press하여 제작하였다. 4점 굽힘 시험하는 동안 전기저항 변화를 측정하여 파괴예측 기능을 평가하였다. 그 결과 전기정항은 재료의 파괴거동과 밀접한 관계를 가지면서 변화함을 알았다. 특히 분말형태의 전기전도상의 첨가는 본 복합재료의 파괴과정을 낮은 응력단계로부터 예측하는데 유용하였다. 결과적으로 이러한 재료설RP의 신개 (파괴예측기능)의도입은 $Si_3N_4$기 세라믹스를 구조재료로 이용함에 있어서 큰 문제가 되고 있는 신뢰성 확보에 새로운 기능을 준다고 생각되었다. 생각되었다.

• 한국진공학회지
• /
• 제12권1호
• /
• pp.1-6
• /
• 2003

50 kW급 출력의 전자빔을 발생시킬 수 있는 축선 방식 전자총 (axial electron beam gun)과 전원장치를 제작하였다. 전자총은 전자빔 발생장치와 전자빔 궤적제어장치로 이루어졌다. 전자빔 발생장치는 필라멘트와 음극(cathode), 양극(anode)으로 구성되었고 전자빔의 최대전류는 2A, 가속전압은 평균 25kV이다. 전자빔 궤적제어장치는 전자빔의 크기를 조절하는 초점 (focusing) 코일과 전자빔의 방향을 조절하는 편향(deflection) 코일 및 주사 (scanning) 코일로 구성되었다. 전자총과 별개로 진공용기 내부에 Helmholtz 코일을 설치하여 시료의 표면에 입사되는 전자빔의 입사각도를 최적화시켰다. 각 부분의 동작 특성을 측정한 결과와 제작된 전자총으로 고융점 원소인 지르코늄 (zirconium, Zr)과 가돌리늄(gadolinium, Gd) 금속을 증발시킨 결과를 정리하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제44권2호
• /
• pp.73-78
• /
• 2018

Objectives: The goal of this study was to evaluate the rates of complications, morbidity, and safety with the transparotid approach. Materials and Methods: A retrospective study was conducted and consisted of 53 surgically treated patients in the past five years for low condylar neck and subcondylar fractures. Only patients with malocclusion and who underwent open reduction with internal fixation with the retromandibular transparotid approach were included. The examined parameters were postoperative suboptimal occlusion, deflection, saliva fistula, and facial nerve weakness. Results: Fifty-three patients had an open reduction with internal fixation on 55 sides (41 males, 77.4%; mean age, 42 years [range, 18-72 years]). Four patients (7.5%) experienced transient facial nerve weakness of the marginal mandibular branch, but none was permanent. Four patients had a salivary fistula, and 5 patients showed postoperative malocclusion, where one needed repeat surgery after one year. One patient showed long-term deflection. No other complications were observed. Conclusion: The retromandibular transparotid approach is a safe procedure for open reduction and internal fixation of low condylar neck and subcondylar fractures, and it has minimal complications.

• Structural Engineering and Mechanics
• /
• 제44권6호
• /
• pp.801-814
• /
• 2012

The strain rate effects on the interaction between a Mode I matrix crack and an inclined elliptic matrix-inclusion interface under dynamic tensile loadings were investigated numerically, and the results are in agreement with previous experimental data. It is found, for a given material system, that there are the first and the second critical strain rates, by which three kinds of the subsequent crack growth patterns can be classified in turn with the increasing strain rate, namely, the crack deflection, the double crack mode and the perpendicular crack penetration. Moreover, such a crack deflection/penetration behavior is found to be dependent on the relative interfacial strength, the inclined angle and the inclusion size. In addition, it is shown that the so-called strain rate effect on the dynamic strength of granule composites can be induced directly from the structural dynamic response of materials, not be entirely an intrinsic material property.