• Structural Engineering and Mechanics
• /
• v.10 no.1
• /
• pp.81-92
• /
• 2000

This study is an investigation of the effect of cracks on the dynamical characteristics of a cantilever beam, having multiple open-edge transverse cracks. The flexibilities due to crack have been identified for several crack depths and locations. In the study the finite element method and component mode synthesis methods are used. Coupling the components is performed by a flexibility matrix taking into account the interaction forces. Each component is modelled by cantilever beam finite elements with two nodes and three degrees of freedom at each node. The results obtained lead to conclusion that, by using the drop in the natural frequencies and the change in the mode shapes, the presence and nature of cracks in a structure can be detected. There is some counter-evidence, however, that the effects due to multiple cracks may interact to make detection more difficult than for isolated cracks.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.391-396
• /
• 1998

The concrete structures are hardly ever built under ideal conditions. So many defects may occur for a various reasons such as unsuitable and defective materials, construction methods, poor workmanship, particular structural form and prevailing weather conditions. Some structural form can greatly increase the risk of occurrence of defects. Therefore we investigated the actual condition of the deterioration factors for reinforced concrete apartment, which was composed of 85 apartments with various building ages in different regions with five evaluation the deterioration factors of apartment building to establish the overall evaluation system of deterioration degree for reinforced concrete apartment in Korea.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.15-20
• /
• 2011

The lithography system installed inside precision industry's (e.g. TFT-LCD) production factories are increasing in size, thereby increasing its dynamic load along with it. Such condition causes vibration within the area where the system is installed, which then negatively affects the production line to produce defective products. To prevent this type of situation, the facilities should adopt dynamic design that considers the lithography system's dynamic load. This study predicts the maximum value allowed for dynamic stiffness (which is a ratio of vibration response against a single unit of the dynamic load) of the lithography system and explains the result of its application on actual structures inside the facilities.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1304-1309
• /
• 2004

Synthesis of carbon nanotubes and nanofibers on a catalytic metal substrate, using an ethylene fueled inverse diffusion flame, was investigated. Multi-walled carbon nanotubes, with diameters of 20 - 60nm, were formed on the substrate coated with nickel-nitrate in the region of 5 - 6mm from the flame center along the radial direction. The gas temperature for this region was ranging from about 1400 to 900K. Nickel particles originated from the coated nickel-nitrate on the substrate were the major catalyst for the formation of the nanomaterials. HR-TEM and Raman spectrum revealed that synthesized carbon nanotubes had multi-walled structures with some defective graphite layers at walls.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.189-196
• /
• 1994

Quality assurance in the process of manufacturing high strengh bolt sets used in the frictional joints of structures in one of important concern to users as well as to manufactures. In case of occurrences of either defective or low-quality products, even if they are quite rare, some systematic means of localizing the cause-characteristics and matching to corresponding production process is necessary. Control chart of torque factor is the primary indicatir in finding defectiveness of the products. Use of correlation diagrams ofnhardness of the bolt set presents in part a way of screening the cause. Retest data of the bolt set provide additional ideas of localizing the cause, for which theoretical background is presented in this regard. A process-characteristics matrix relating the causes of low quality to the corresponding process of manufacturing, which is of prime importance for the feedback control of production, is also proposed. Finally general features of control to assure quality of the set is described.

• Korean Journal of Social Welfare
• /
• v.59 no.4
• /
• pp.137-162
• /
• 2007

In democracy basic rights such as political equality and participation through elections have been respected, opportunities of corporation and opposition have been guaranteed, and ability of self-learning and self-correction have been developed. These positive factors give preconditions for the welfare development in the democratic state. Because in this state adults get the suffrage and the open competition for official positions induces political parties use social policies as means to win the election. That is to say, political parties have an incentive to use various social policies to win the election. Democracy, therefore, has affinity with social policy. The affinity between democracy and social policy can be found also in Korea which was democratized in 1987. But, in Korea, the positive relationship between democracy and social policy is very weak due to the problem of constitutional structures. Korean Parliament usually enacts abstract social act and delegates the right to fill concrete contents of the social acts to the executive. Delegation itself has no problem, but excessive delegation is a problem since the executive can overuse its discretion as sacrificing the social rights of the citizen. In addition social consensus could not be achieved in this constitutional structures, which are a obstacle to establishing a political process in the Parliament to promote the welfare development through party competition. Excessive delegation should be reduced, and the Parliament should fill concrete contents of the social acts as exercising its legislative power more. Then a mechanism of welfare development can be launched in Korea.

• Korean Journal of Agricultural Science
• /
• v.36 no.2
• /
• pp.159-165
• /
• 2009

This study was conducted to identify the PERV (Porcine Endogenous Retrovirus) integration sites and their characterizations using the porcine genomic sequence information. Total 114 Mb (4.2%) sequence of the 2.7 Gb pig genome was investigated for the PERV sequences. As the results, 8 PERV sequences were identified and their genomic structures were deduced from the BLAST searches against previously known PERV genes. Seven PERVs have internal deletions in the protein coding region and they will not be functional. The other one also has internal deletions in the gag and env genes, indicating this PERV is also defective. Even though we could not identify the functional PERVs in this study, the results presented here can be used for the fundamental research materials for controlling PERV infections in relation to xenotransplantation using porcine organs and tissues.

• Steel and Composite Structures
• /
• v.19 no.1
• /
• pp.131-152
• /
• 2015

Easy detection and evaluation of defect in the tube structure is a continuous problem and remains a significant demand in tube inspection technologies. This study is aimed to automate defect detection using the pattern recognition approach based on the classification of high frequency stress wave signals. The stress wave signals from vibrational impact excitation on several tube conditions were captured to identify the defect in ASTM A179 seamless steel tubes. The variation in stress wave propagation was captured by a high frequency sensor. Stress wave signals from four tubes with artificial defects of different depths and one reference tube were classified using the autoregressive (AR) algorithm. The results were demonstrated using a dendrogram. The preliminary research revealed the natural arrangement of stress wave signals were grouped into two clusters. The stress wave signals from the healthy tube were grouped together in one cluster and the signals from the defective tubes were classified in another cluster. This approach was effective in separating different stress wave signals and allowed quicker and easier defect identification and interpretation in steel tubes.

• Archives of Reconstructive Microsurgery
• /
• v.9 no.2
• /
• pp.134-138
• /
• 2000

Arthrodesis of the ankle joint is inevitable in the cases of severe arthrosis or defective bony structures around ankle joint. There have been many kinds of arthrodesis methods were introduced. In cases with failed athrodesis with previous arthrodesis surgery and neuropathic joints have difficulty to achieve fusion of joint with conventional methods. Authors underwent four cases of ankle fusion with vascularized fibular graft from 1997 in the cases of three failed fusions and one diabetic neuropatic joint. Two of four performed free vascularized fibular transplantation from contralateral side leg with microvascular anastomosis, two of four performed with pedicled fibular transposition to the ankle joint in same side leg. Three of four cases achieved arthrodesis average 9.2 months after surgery, one case was failed due to vascular thrombosis of the anastomosed site in diabetic neuropathic condition. The result of this technique revealed 75%(three of four) success rate and longer bone union time required. However, in these cases had no recommendable options with conventional bone graft and additional ankle joint fusions procedure because of poor bone quality and defect of distal tibia and talus portions. Free vascualrized fibular transfer to the failed athrodesis of ankle joint is one of the effective alternative methods in failed ankle fusion cases, especially the quality of the bone around previous fusion site is poor.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.414-421
• /
• 1999

Helicobacter pylori were found to be resistant to azide but sensitive to vanadate, suggesting that defect in the P-type ATPase activity rather than F-type ATPase would be lethal to cell survival or growth. To elucidate the relationship between this enzyme inhibition and H. pylori death, we determined the effect of omeprazole (OMP) plus vanadate on enzyme activity and cell growth. The minimum inhibitory concentration (MIC; ca. 0.8$\mu$mol/disk) of vanadate for H. pylori growth was lowered over l0-fold with the aid of OMP, whereby its inhibitory potential toward the P-type ATPase activity was diametrically increased. Alternatively, we found that this enzyme activity was essential for active transport in H. pylori. From these observations, we strongly suggest that the immediate cause of the growth inhibition of H. pylori cells with OMP and/or vanadate might be defective in the cell's active transport due to the lack of P-type ATPase activity. From the spectral data with circular dichroism (CD) spectroscopy, we found that activated OMP (OAS) at concentration below MIC did not disrupt helical structures of membrane proteins. Separately, we determined the cytopathic effect of OAS by SDS-PAGE, indicating the change in the production of cytoplasmic protein but not cell membrane.