• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.23-35
• /
• 2003

회전기계의 결함발생은 기계의 여러 상태변화에 의한 결과이며, 이 때 발생하는 증상(현상) 또한 다양하고 복잡하기 때문에 기계의 특성을 파악하고 원인을 추정하기 위해서는 매우 전문적인 지식과 오랜 경험이 필요하다. 실제 산업현장에서 사용되는 각종 회전기계들은 고성능화, 복잡화 및 전문가의 부족으로 인해, 결함발생 시 원인과 발생현상의 관계를 명확히 표현하기에는 어려움이 있다. 이에 최근에는 진단에 관한 전문적인 지식을 구조적으로 표현할 수 있는 전문가 시스템(expert system)의 도입을 위한 연구가 활발히 이루어지고 있다.(중략)

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.176-179
• /
• 2006

We present the method to obtain four speckle patterns with relative phase shift of $\pi/2$ by passive devices such as wave plate and polarizer, and calculate the phase at each point of the speckle pattern in shearographic system using Wollaston in And, to demonstrate the feasibility of the proposed system, we present the experimental results using polymer insulator.

• Journal of Chest Surgery
• /
• v.18 no.3
• /
• pp.371-382
• /
• 1985

Over the past 4 decades after World War II a great deal of data and clinical experiences have been accumulated relating to the diagnosis and surgical treatment of congenital and acquired cardiovascular diseases in Korea. Clinical data on cardiovascular surgical cases performed in all 22 hospitals for open heart surgery in Korea was collected from it`s starting up to December 1984. The first recorded open heart surgery for a young adult atrial septal defect was performed by Young Kyoon Lee, M.D. on August 7, 1959, Seoul National University Hospital, Korea. And, some scattered reports on cardiovascular surgical cases in it`s early period have changed recently the number of hospitals for open heart surgery and clinical cases enormously in total amount of 13, 100 cardiovascular operations performed on 12, 990 cases up to December 1984. Of the total 13, 100 cardiovascular operations, congenital cardiovascular anomaly occupied 70%. Of the congenital cases, 6, 580 operations for acyanotic group [operative mortality 4.5%], and 2, 489 operations for cyanotic group [operative mortality 20%]. The incidence of congenital cardiovascular anomaly in order of frequency was ventricular septal defect [29%], patent ductus arteriosus [26%], Tetralogy of Fallot [22%], atrial septal defect [8, 6%], pulmonary valve stenosis [3.0%], and endocardial cushion defect [1.1%]. Of the 3, 412 valvular heart disease cases, which occupied 85% of total 4, 031 acquired cardiovascular disease, individual incidence was in mitral 2, 565 [63.5%], double valve 451 [11.1%], and simple aortic valve 351 [8.7%]. Total number of valve replaced, mechanical and tissue, was 2, 795, and 1, 884 for mitral, 808 for aortic, and 103 for tricuspid in position. Operative mortality for prosthetic valve replacement in total was 9.8%. Remained acquired cardiovascular cases chronic constrictive pericarditis [7.9%], cardiac tumor [1.9%], coronary artery bypass [1.8%], cardiac trauma [1.2%] and less than 1% of thoracic aortic aneurysm. Overall operative mortality for open and non-open cardiovascular surgical operation was 7.7% [congenital acyanotic group 3.2%, congenital cyanotic group 19.4%, and acquired group 7.8%]. In conclusion, present status of cardiovascular surgery in Korea is stabilized with accumulation of clinical cases and experiences, and the future in the field of cardiovascular surgery is promising, especially in the infant cardiac surgery and aortocoronary bypass surgery, with abrupt increase of specialized cardiac centers, trained specialists, and expanding social health insurance.

• Journal of Applied Reliability
• /
• v.18 no.1
• /
• pp.87-94
• /
• 2018

Purpose: In this study, the defect quantification of thin metal plate was evaluated by using lock-in infrared thermography. Methods: A STS304 standard specimens, which had the artificial-defects of different size, were used. The focal distance between the infrared camera and the specimen was set to 500mm, and the distance between the lump and the specimen was set to 200mm. One halogen lamp with a maximum capacity of 1kW was used, and phase-lock infrared thermal images with a frequency of 1Hz were captured and analyzed. Result: Objectively quantified data values were obtained by analyzing the contrast ratio and signal-to-noise ratio. Conclusion: The possibility of defect diagnosis for thin metal plate was confirmed by using the lock-in infrared thermography technique.

• Journal of Periodontal and Implant Science
• /
• v.48 no.2
• /
• pp.84-91
• /
• 2018

Purpose: The purpose of this study was to visualize and identify peri-implant bone defects in optical coherence tomography (OCT) images and to obtain quantitative measurements of the defect depth. Methods: Dehiscence defects were intentionally formed in porcine mandibles and implants were simultaneously placed without flap elevation. Only the threads of the fixture could be seen at the bone defect site in the OCT images, so the depth of the peri-implant bone defect could be measured through the length of the visible threads. To analyze the reliability of the OCT measurements, the flaps were elevated and the depth of the dehiscence defects was measured with a digital caliper. Results: The average defect depth measured by a digital caliper was $4.88{\pm}1.28mm$, and the corresponding OCT measurement was $5.11{\pm}1.33mm$. Very thin bone areas that were sufficiently transparent in the coronal portion were penetrated by the optical beam in OCT imaging and regarded as bone loss. The intraclass correlation coefficient between the 2 methods was high, with a 95% confidence interval (CI) close to 1. In the Bland-Altman analysis, most measured values were within the threshold of the 95% CI, suggesting close agreement of the OCT measurements with the caliper measurements. Conclusions: OCT images can be used to visualize the peri-implant bone level and to identify bone defects. The potential of quantitative non-invasive measurements of the amount of bone loss was also confirmed.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.421-426
• /
• 2010

Purpose: Patients with serious burns are prone to chondritis due to lack of soft tissue in the auricle, which can cause severe defects in the auricular morphology. In addition, skin damage occurs frequently in the vicinity of post-burn wounds, presenting difficulties in reconstruction surgery. An auricular reconstruction has functional and cosmetic significance. The aim of this study is to develop appropriate reconstruction methods for auricular defects. Methods: Thirty seven patients, who were treated for auricular defects from 2005 to 2009, were enrolled in this study. A local flap, multiple regional flaps and cartilage framework with or without a temporal fascial flap were applied in reconstruction surgery according to the location of the auricular defect. Results: The age of the subjects ranged from 11 to 56. Some subjects had defects that cover more than half of the helical rim with most exhibiting post-burn scars in the vicinity, for whom a multiple regional flap was used. A single use of a tubed flap was sufficient for subjects with defects that covered less than half of the helical rim. A regional flap was also used for reconstruction in subjects with defects covering both the helical rim and antehelix. Conclusion: Achieving satisfactory results from the skin flaps and skin grafts for post-burn auricular defects in both functional and cosmetic aspects is a difficult task. Therefore, selecting an appropriate surgical method through proper diagnosis of the auricular defect and the state of the available skin in the vicinity is essential.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_1
• /
• pp.177-184
• /
• 2022

The automatic defect sorting function of machinery parts is being introduced to the automation of the manufacturing process. In the final stage of automation of the manufacturing process, it is necessary to apply computer vision rather than human visual judgment to determine whether there is a defect. In this paper, we introduce a deep learning method to improve the classification performance of typical mechanical parts, such as welding parts, galvanized round plugs, and electro galvanized nuts, based on the results of experiments. In the case of poor welding, the method to further increase the depth of layer of the basic deep learning model was effective, and in the case of a circular plug, the surrounding data outside the defective target area affected it, so it could be solved through an appropriate pre-processing technique. Finally, in the case of a nut plated with zinc, since it receives data from multiple cameras due to its three-dimensional structure, it is greatly affected by lighting and has a problem in that it also affects the background image. To solve this problem, methods such as two-dimensional connectivity were applied in the object segmentation preprocessing process. Although the experiments suggested that the proposed methods are effective, most of the provided good/defective images data sets are relatively small, which may cause a learning balance problem of the deep learning model, so we plan to secure more data in the future.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3512-3517
• /
• 2007

Nuclear power plant has many external fire hydrants that have to operate in the state of emergency such as facility fire, forest fire. The valve stem of one among them was broken 3 times for 4 years. It had long valve stem and operated under high water pressure. The elongation and the tensile strength for the broken valve stem was measured to examine the defect of material property. And the vibration level and the natural frequencies was detected to check the resonance. As the result of a diagnosis, the cause of this fault is proven buckling of long valve stem.

• Journal of Korean Foot and Ankle Society
• /
• v.22 no.2
• /
• pp.49-54
• /
• 2018

Ankle sprains are among the most common injuries sustained during athletic activities and daily life. Acute ankle sprain is usually managed conservatively with functional rehabilitation but the failure of conservative treatment leads to the development of chronic ankle instability. The development of repetitive ankle sprains and persistent symptoms after injury has been termed chronic ankle instability. Acute ankle sprains and chronic ankle instability require a careful evaluation to detect other comorbidities, such as subtalar instability, osteochondral defect, peroneal tendinopathy, tarsal coalition, os trigonum, flexor hallucis longus tendinitis, calcaneus anterior process fracture, and neural injuries. For the successful treatment of acute ankle sprains and chronic ankle instability, the treatment of comorbidity lesions should be performed first.

• Clinical and Experimental Pediatrics
• /
• v.53 no.6
• /
• pp.669-679
• /
• 2010

The risk of mortality and morbidity of patients with congenital heart defects (CHDs) is highest during neonatal period and increases when diagnosis and proper management are delayed. Neonates with critical CHDs may present with severe cyanosis, respiratory distress, shock, or collapse, all of which are also frequent clinical presentations of various respiratory problems or sepsis in the newborn. Early diagnosis and stabilization and timely referral to a tertiary cardiac center are crucial to improve the outcomes in neonates with CHDs. In this review, the clinical presentation of critical and potentially life-threatening CHDs is discussed along with brief case reviews to help understand the hemodynamics of these defects and ensure proper decision-making in critically ill patients.