• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.340-345
• /
• 2003

This study, as a basic study for establishing a influence forecasting/estimating model when drain the deep sea water to the ocean after using it, carried out studies as follows; 1) estimating the amount of river discharge and pollutant loads inflowing into the developing region of deep sea water in East Sea, Korea 2) a field observation of tidal current, vertical distribution of water temperature and salinity, and 3-D numerical experiment of tidal current to analysis physical oceanographic status. The amount of river discharge flowing into the study area was estimated about $462.6{times}10^{3}m^{3}/day$ of daily mean in 2002 year. annual mean pollutant load of COD, TN and TP were estimated 7.02 ton-COD/day, 4.06 ton-TN/day and 0.39 ton/day, respectively. Field observation of tidal current results usually show about $20{\sim}40cm/sec$ of current velocity at the surface layer, it indicated a tendency that the current velocity decreases under 20cm/sec as the water depth increases. We could find a stratification within approximately the depth of 30m in field observation area, and the depth increases. We could find a stratification within approximately the depth of 30m in field observation area, and the differences of water temperature and salinity between the surface layer and bottom layer were about $18^{\circ}C$ and 0.8 psu, respectively. On the other hand, we found that there was a definite as the water mass of deep sea water about 34 psu of salinity.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.1 s.62
• /
• pp.14-19
• /
• 2005

As a basic study for establishing the input conditions of a forecasting/estimating model, used for deep-sea water drainage to the ocean, this study was carried out as follows: 1) estimating the amount of river discharge and pollutant loads into the developing region of deep sea water in the East Sea, Korea, 2) a field observation of tidal current, vertical water temperature, and salinity distribution, 3) 3-D numerical experiment of tidal current to analyze the physical oceanographic status. The amount of river discharge flowing into this study area was estimated at about $462.7{\times}103 m\^3/day$ of daily mean in 2002. Annual mean pollutant load of COD, TN, and TP were estimated at 7.02 ton-COD/day, 4.06 ton-TN/day, and 0.39 ton/day, respectively. Field observation of tidal current normally shows 20-40cm/sec of current velocity at the surface layer, and it decreases under 20cm/sec as the water depth increases. We also found a stratification condition at around 30m water depth in the observation area. The differences in water temperature and salinity, between the surface layer and the bottom layer, were about 18 C and 0.8 psu, respectively. On the other hand, we found a definite trend of 34 psu salinity water mass in the deep sea region.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.4
• /
• pp.227-238
• /
• 2013

The purpose of this study is to develop a process technology to produce high hardness drinking water which meet drinking water standard, remaining useful minerals like magnesium and calcium in the seawater desalination process while removing the sulfate ions and chloride ions. Seawater have been separated the concentrated seawater and desalted seawater by passing on Reverse Osmosis membrane (RO). Using Nano-filtration membrane (NF), We were prepared primary mineral concentrated water that sodium chloride were not removed. By the operation of electro-dialysis (ED) having ion exchange membrane, we were prepared concentrated mineral water (Mineral enriched desalted water) which the sodium chloride is removed. We have produced the high hardness water to meet the drinking water quality standards by diluting the mineral enriched desalted water with deionized water by RO. Reverse osmosis membranes (RO) can separate dissolved material and freshwater from seawater (deep seawater). The desalination water throughout the second reverse osmosis membrane was completely removed dissolved substances, which dissolved components was removed more than 99.9%, its the hardness concentration was 1 mg/L or less and its chloride concentration was 2.3 mg/L. Since the nano-filtration membrane pore size is $10^{-9}$ m, 50% of magnesium ions and calcium ions can not pass through the nano-filtration membrane, while more than 95% of sodium ions and chloride ions can pass through NF membrane. Nano-filtration membrane could be separated salt components like sodium ion and chloride ions and hardness ingredients like magnesium ions and calcium ions, but their separation was not perfect. Electric dialysis membrane system can be separated single charged ions (like sodium and chloride ions) and double charged ions (like magnesium and calcium ions) depending on its electrical conductivity. Above electrical conductivity 20mS/cm, hardness components (like magnesium and calcium ions) did not removed, on the other hand salt ingredients like sodium and chloride ions was removed continuously. Thus, we were able to concentrate hardness components (like magnesium and calcium ions) using nano-filtration membrane, also could be separated salts ingredients from the hardness concentration water using electrical dialysis membrane system. Finally, we were able to produce a highly concentrated mineral water removed chloride ions, which hardness concentration was 12,600 mg/L and chloride concentration was 2,446 mg/L. By diluting 10 times these high mineral water with secondary RO (Reverse Osmosis) desalination water, we could produce high mineral water suitable for drinking water standards, which chloride concentration was 244 mg/L at the same time hardness concentration 1,260 mg/L. Using the linked process with reverse osmosis (RO)/nano filteration (NF)/electric dialysis (ED), it could be concentrated hardness components like magnesium ions and calcium ions while at the same time removing salt ingredients like chloride ions and sodium ion without heating seawater. Thus, using only membrane as RO, NF and ED without heating seawater, it was possible to produce drinking water containing high hardness suitable for drinking water standard while reducing the energy required to evaporation.

• Journal of Life Science
• /
• v.18 no.4
• /
• pp.503-508
• /
• 2008

Deep sea water from the East sea was tested for breast cancer chemoprevention and metastasis by measuring the activities of cytochrome P450 1A1 and aromatase, invasiveness, and activity and expression of matrix metalloproteinase (MMP)-9 in breast MDA-MB-231 cancer cell. The in vitro incubation of rat liver microsome with deep sea water (a hardness range of $100{\sim}1,000$) showed a hardness-dependent inhibition of 7,12-dimethylbenz[a]anthracene (DMBA)-induced cytochrome P450 1A1 activity. Deep sea water showed 27.1, 45.4 and 51.9% inhibition of microsomal aromatase activity at the hardness of 600, 800 and 1,000, respectively. In addition deep sea water inhibited not only the invasiveness of 12-O-tetradecanoylphorbol-13-acetate (TPA)-treated MDA-MB-231 cells through matrigel-coated membrane in a hardness-dependent manner but also the activity and expression of MMP-9 in MDA-MB-231 cell.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.2
• /
• pp.101-107
• /
• 2022

Dean (1965) proposed the use of the root mean square error (RMSE) in the dynamic free surface boundary condition (DFSBC) and kinematic free-surface boundary condition (KFSBC) as an error evaluation criterion for wave theories. There are well known wave theories with RMSE more than 1%, such as Airy theory, Stokes theory, Dean's stream function theory, Fenton's theory, and trochodial theory for deep-water waves. However, none of them can be applied for deep-water breaking waves. The purpose of this study is to provide a closed-form solution for deep-water waves with RMSE less than 1% even for breaking waves. This study is based on a previous study (Shin, 2016), and all flow fields were simplified for deep-water waves. For a closed-form solution, all Fourier series coefficients and all related parameters are presented with Newton's polynomials, which were determined by curve fitting data (Shin, 2016). For verification, a wave in Miche's limit was calculated, and, the profiles, velocities, and the accelerations were compared with those of 5^th-order Stokes theory. The results give greater velocities and acceleration than 5^th-order Stokes theory, and the wavelength depends on the wave height. The results satisfy the Laplace equation, bottom boundary condition (BBC), and KFSBC, while Stokes theory satisfies only the Laplace equation and BBC. RMSE in DFSBC less than 7.25×10^-2% was obtained. The series order of the proposed method is three, but the series order of 5^th-order Stokes theory is five. Nevertheless, this study provides less RMSE than 5^th-order Stokes theory. As a result, the method is suitable for offshore structural design.

• Journal of the korean society of oceanography
• /
• v.31 no.4
• /
• pp.164-172
• /
• 1996

CREAMS (Circulation Research of the East Asian Marginal Seas) Expeditions have provided a rare opportunity to carry out precise measurements of salinity, temperature and chemical tracers extensively in all major basins of the East Sea (Japan Sea) in 1993-1996 for the first time in more than 60 years since Uda's investigation (Uda, 1934). Studies revealed unequivocal evidence that the East Sea Proper Water (ESPW), previously known as a single homogeneous water mass, is indeed made of several distinct water masses. CREAMS data further confirmed the earlier observations of Gamo et al. (1986) that properties in Deep Waters in the East Sea have been changing during at least the last 25 years. There is evidence, especially from the analysis of the DO profile, that these changes may result from a major change in the mode of deep water formation: from bottom water formation in the past to intermediate/deep water formation in recent years. The causes for these changes are not clear at the present time, but nay include natural variation and may also reflect recent global changes in regional scale. A moving-boundary box model is presented to describe current observations, predicting the turnover time of the total deep and bottom waters to the cold surface waters to be ${\sim}$80 years in 1996.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.333-335
• /
• 2003

Deep Ocean Water is formed within restricted area including polar sea (high latitude) by cooling of surface seawater and globally circulated in the state of insolation with surface seawater. Although not as obvious as estuaries mixing, Brine groundwater is mixture of recirculated seawater and groundwater. Seawater having high osmotic pressure infiltrate into unconfined aquifer where is connected to the sea. The ions dissolved in seawater are present in constant proportions to each other and to the total salt content of seawater. However deviation in ion proportions have been observed in some brine groundwater. Some causes of these exception to the Rule of constant proportions are due to many chemical reactions between periphery soil and groundwater. While Deep Ocean Water (DOW) have a large quantity of functional trace metals and biological affinity relative to brine groundwater, DOW have relatively small amount of harmful bacteria and artificial pollutants.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.24-29
• /
• 2003

Deep sea water has cold temperature, abundant nutrients and minerals, and good water quality that is pathogen-free and stable. Compared with surface water, deep sea water contains more nutrition salt, such as nitrogen and phosphor. Moreover, if has the good balance of minerals. Because of the ability of the spray drying process to produce a free-flowing power considering of spherical particles with a well-defined size distribution and the rapid drying times for heat-sensitive material, spray drying is attractive for a wide range of applications spray drying is a unique unit operation in which powders are produced from a liquid feed in a single processing step. Key component of the process are atomizer, spray chamber. Design of spray chamber should be based on the atomizer type, the production rate, and the particle size required. Because of the complex processes taking place during spray drying, traditional design method are based on pilot-plant tests and empirical scale-up rules. Modern technique such as CFD have a role to play in design and troubleshooting.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1149-1154
• /
• 2017

In this paper, we propose a sensorless multi-function controller applicable for deep well water pumps using current detection method. The proposed system overcomes various drawbacks of existing sensored system and additional features like Over current protection function due to overload, Under current protection function for idling at low water level and Relay function for starting single phase motors and acts as a level indicator to detect water lever in real time by the current detection method. A prototype of the multi-function controller system is designed and all of its functions are tested in the laboratory. The application of the proposed controller ensures reduction in the power consumption and maintenance cost in the facilities like water and septic tanks, drainage and waste water system, oil and chemical tanks where deep well pumps are used.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.29-30
• /
• 2022

The unit-water content has a very significant effect on the durability of the construction structure and the quality of concrete. Although there are various methods for measuring the unit-water content, there are problems of time required for measurement, precision, and reproducibility. Recently, there is an FDR sensor capable of measuring moisture content in real time through an apparent dielectric constant change of electromagnetic waves. In addition, various artificial intelligence techniques that can non-linearly supplement the accuracy of FDR sensors are being studied. In this study, the accuracy of unit-water content measurement was compared and evaluated using machine learning and deep learning techniques after normalizing the data secured in concrete using frequency domain reflectometry (FDR) sensors used to measure soil moisture at home and abroad. The result of comparing the accuracy of machine learning and deep learning is judged to be excellent in the accuracy of deep learning, which can well express the nonlinear relationship between FDR sensor data and concrete unit-water content.