• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.1
• /
• pp.45-50
• /
• 2021

Machines and facilities are physically or chemically degenerated by continuous usage. The representative type of the degeneration is the wearing of tools, which results in the process mean shift. According to the increasing wear level, non-conforming products cost and quality loss cost are increasing simultaneously. Therefore, a preventive maintenance is necessary at some point. The problem of determining the maintenance period (or wear limit) which minimizes the total cost is called the 'process mean shift problem'. The total cost includes three items: maintenance cost (or adjustment cost), non-conforming cost due to the non-conforming products, and quality loss cost due to the difference between the process target value and the product characteristic value among the conforming products. In this study, we set the production volume as a decreasing function rather than a constant. Also we treat the process variance as a function to the increasing wear rather than a constant. To the quality loss function, we adopted the Cpm+, which is the left and right asymmetric process capability index based on the process target value. These can more reflect the production site. In this study, we presented a more extensive maintenance model compared to previous studies, by integrating the items mentioned above. The objective equation of this model is the total cost per unit wear. The determining variables are the wear limit and the initial process setting position that minimize the objective equation.

• Ocean and Polar Research
• /
• v.40 no.4
• /
• pp.237-247
• /
• 2018

This study aims to estimate optimal harvests, fishing efforts, and stock levels of hairtail harvested by the large pair bottom trawl, the large otter trawl, the large purse seine, the offshore long line, and the offshore angling fisheries by using the surplus production models and the current value Hamiltonian method. Processes of this study are as follows. First of all, this study estimates the standardized fishing efforts regarding the harvesting of the hairtail by the above five fishing gears based on the general linear model developed by Gavaris. Secondly, this study estimates environmental carrying capacity (k), intrinsic growth rate (r), and catchability coefficient (q) by applying the Clarke Yoshimoto Pooley (CY&P) model among various surplus production models. Thirdly, this study estimates the optimal harvests, fishing efforts, and stock levels regarding the hairtail by the current value Hamiltonian method, including the average landing price, the average unit cost, and the social discount rate. Finally, this study attempts a sensitivity analysis to figure out changes in optimal harvests, fishing efforts, and stock levels due to changes in the average landing price and the average unit cost. As results induced by the current value Hamiltonian method, the optimal harvests, fishing efforts, and stock levels regarding the hairtail caught by several fishing gears were estimated as 33,133 tons, 901,080 horse power, and 79,877 tons, respectively. In addition, from the results of the sensitivity analysis, first of all, if the average landing price of the hairtail constantly increases, the optimal harvests of it increase at a decreasing rate, and then harvests finally slightly decrease as a result of decreases in stock levels. Secondly, if the average unit cost of fishing efforts continuously increases, the optimal fishing efforts decreases, but optimal stock levels increase. Optimal harvests start climbing and then decrease continuously due to increases in the average unit cost. In summary, this study suggests that the optimal harvests (33,133 tons) were larger than actual harvests (25,133 tons), but the optimal fishing efforts (901,080 horse power) were much less than estimated standardized fishing efforts (1,277,284 horse power), corresponding to the average of the recent three years (2014-2016). This result implies that the hairtail has been inefficiently harvested and recently overfished due to excessive fishing efforts. Efficient management and conservation policies on stock levels need to be urgently implemented. Some appropriate strategies would be to include the hairtail in the Korean TAC species or to extend the closed fishing season for this species.

• Journal of Hospice and Palliative Care
• /
• v.10 no.1
• /
• pp.29-34
• /
• 2007

Purpose: The purpose of this study was to show the differences of medical cost between hospice and non-hospice care for terminally ill patients. This information provides basic data to nationally institutionalize hospice care for decreasing costs and enhancing quality of life for terminally ill patients. Methods: Participants of this study were 114 terminally ill cancer patients who were diagnosed and died with stomach cancer and lung cancer at the K hospital of the C university. The study was a retrospective survey design that analyzed the medical costs for two weeks before they died. The cost analysis was done according to 11 items form the medical cost bill. Results: Patients enrolled in hospice care had significantly lower medical costs (53%) than did non-hospice patients especially in use of TPN, narcotic analgesics, nursing care, radiology tests, and blood tests. Among patients enrolled/admitted in the hospice unit, there was a significant cost difference only in use of analgesics whether the hospice specialized doctor was in charge of care or not. The cost was significantly lower when a hospice specialized doctor was in charge of care although the total medical cost was the same. Conclusion: This study identified lower medical costs for patients cared for in the hospice unit. Thus, we urge institutionalizing hospice care without delay to insure cost benefits as well as quality care.

• International Journal of Computer Science & Network Security
• /
• v.23 no.9
• /
• pp.162-165
• /
• 2023

Power can be generated from either renewable or non-renewable sources. Renewable sources are liked to maintain a strategic distance from contamination emanation and rely on upon fossil energizes which is decreasing day by day. The proposed sun powered vitality transformation unit comprises of a sun oriented exhibit, Bidirectional DC-DC converter, single stage inverter and AC. The inverter changes over DC control from the PV board into AC power and offered it to the heap which is associated with the lattice. The photovoltaic sun powered vitality (PV) is the most direct approach to change over sunlight based radiation into power and depends on the photovoltaic impact. The most extreme power point following of the PV yield for all daylight conditions is a key to keep the yield control per unit cost low for fruitful PV applications. Framework associated PV frameworks dependably have an association with people in general power matrix by means of an appropriate inverter in light of the fact that a PV module conveys just dc power. This project presents the new design, Development and Performance Analysis of a Grid Connected PV Inverter. Demonstrate that the proposed framework can lessen the Energy Consumption radically from the power board and give a solid support to the Grid.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3116-3123
• /
• 1999

Current disk systems are generally designed to reduce read traffic more effectively. Hence, write traffic of the I/O workload could potentially become a bottleneck of the disk system performance. In order to overcome this problem without much cost, this paper presents using outermost-zone track of multi-zoned recording disk as a secondary disk cache. The proposed disk cache improves the disk system performance by following exploitations: speed difference between block transfer and track transfer, difference in transfer rate between outermost-zone tracks and inner tracks, reduction in the seek time caused by decreasing the number of disk cache tracks, and idle period during burst accesses. In addition, it does not waste the disk space because it allocates the caching space by the cylinder unit. The simulation results show that the proposed system improves 2.54∼3.11 times better in terms of average response time for write operations than existing disk systems..

• International Journal of Reliability and Applications
• /
• v.17 no.1
• /
• pp.21-49
• /
• 2016

Many mechanical, electrical and electronic products have more than one performance characteristics (PCs). For example the performance degradation of rubidium discharge lamps can be characterized by the rubidium consumption or the decreasing intensity the lamp. The product may degrade due to all the PCs which may be independent or dependent. This paper deals with the design of optimal bivariate step-stress partially accelerated degradation test (PADT) with degradation paths modelled by gamma process. The dependency between PCs has been modelled through Frank copula function. In partial step-stress loading, the unit is tested at usual stress for some time, and then the stress is accelerated. This helps in preventing over-stressing of the test specimens. Failure occurs when the performance characteristic crosses the critical value the first time. Under the constraint of total experimental cost, the optimal test duration and the optimal number of inspections at each intermediate stress level are obtained using variance optimality criterion.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.125-126
• /
• 2011

Construction projects are being more complicated in proportion to the economic development. Process management is a critical issue in the construction that decides success of a project. Especially, a TACT method which divides and manages resources to repeat each activity is more important. Although becoming an issue dealing with the delay at winter season, it is not property developed. This paper suggests 'activity priority method' and 'TACT unit method' through case study. We validate necessity and efficiency of the TACT method through simulations and a survey. We expect cost reduction by decreasing unnecessary spending.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1293-1300
• /
• 2011

The configurations of the evaporator and condenser of a water chiller can be determined from the trade-off between the heat transfer area, which is related to the capital cost and the pressure drop, which is associated with the operational cost. In this study, the design of the water chiller focused on minimizing the water pressure drop of both condenser and evaporator for given cooling capacity and requirements. Commercial enhanced tubes were employed to simulate real-life conditions. The results of the present analysis were compared with those obtained by HTRI software for verifying them. The results indicated that a reduction in the water pressure drop, which is associated with the short length of a tube, can be effected by decreasing the number of tube passes and increasing the number of tubes and the tube diameter. However, using a large number of tubes with smaller diameters can reduce the capital cost because the tubes are short. The reduction of the capital cost is due to the fact that a small-diameter tube has low internal thermal resistance and hence contributes to a decrease in the overall thermal resistance per unit length.

• The Journal of Fisheries Business Administration
• /
• v.46 no.2
• /
• pp.59-74
• /
• 2015

This study aims to estimate optimal harvesting production, fishing efforts, and stock levels of yellow croaker caught by the offshore Stow Net and the offshore Gill Net fisheries using the current value Hamiltonian method and the surplus production model. As analyzing processes, firstly, this study uses the Gavaris general linear model to estimate standardized fishing efforts of yellow croaker caught by the above multiple fisheries. Secondly, this study applies the Clarke Yoshimoto Pooley(CY&P) model among the various exponential growth models to estimate intrinsic growth rate(r), environmental carrying capacity(K), and catchability coefficient(q) of yellow croaker which inhabits in offshore area of Korea. Thirdly, the study determines optimal harvesting production, fishing efforts, and stock levels of yellow croaker using the current value Hamiltonian method which is including average landing price of yellow croaker, average unit cost of fishing efforts, and social discount rate based on standard of the Korean Development Institute. Finally, this study tries sensitivity analysis to understand changes in optimal harvesting production, fishing efforts, and stock levels of yellow croaker caused by changes in economic and biological parameters. As results drawn by the current value Hamiltonian model, the optimal harvesting production, fishing efforts, and stock levels of yellow croaker caught by the multiple fisheries were estimated as 19,173 ton, 101,644 horse power, and 146,144 ton respectively. In addition, as results of sensitivity analysis, firstly, if the social discount rate and the average landing price of yellow croaker continuously increase, the optimal harvesting production of yellow croaker increases at decreasing rate and then finally slightly decreases due to decreases in stock levels of yellow croaker. Secondly, if the average unit cost of fishing efforts continuously increases, the optimal fishing efforts of the multiple fisheries decreases, but the optimal stock level of yellow croaker increases. The optimal harvest starts climbing and then continuously decreases due to increases in the average unit cost. Thirdly, when the intrinsic growth rate of yellow croaker increases, the optimal harvest, fishing efforts, and stock level all continuously increase. In conclusion, this study suggests that the optimal harvesting production and fishing efforts were much less than actual harvesting production(35,279 ton) and estimated standardized fishing efforts(175,512 horse power) in 2013. This result implies that yellow croaker has been overfished due to excessive fishing efforts. Efficient management and conservative policy on stock of yellow croaker need to be urgently implemented.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.3
• /
• pp.285-290
• /
• 2016

In rural area, our farmers confront decreasing benefits owing to imported crops and increased cost. Recently, the government encourage the 6th Industry that merges farming, rural resources, and information and communication technology. Therefor the government makes an investment in supplying 'smart greenhouse' in which a farmer monitor growing crops and environment information to control growing condition. The objective of this study is developing an Moving Monitor and Control System for crops in green House. This system includes a movable sensing unit, a controlling unit, and a server PC unit. The movable sensing unit contains high resolution IP camera, temperature and humidity sensor and WiFi repeater. It rolls on a rail hanging beneath the ceiling of a green house. The controlling unit contains embedded PC, PLC module, WiFi router, and BLDC motor to drive the movable sensing unit. And the server PC unit contains a integrated farm management software and home pages and databases in which the images of crops and environment informations. The movable sensing unit moves widely in a green house and gathers lots of information. The server saves these informations and provides them to customers with the direct commercing web page. This system will help farmers to control house environment and sales their crops in online market. Eventually It will be helpful for farmers to increase their benefits.