• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.117-124
• /
• 2008

Construction of concrete slab track is trending to increase gradually in national and international for reduction in track maintenance cost and secure of ride comfort. However, in case of railway bridge installed concrete slab track, the serviceability review of end deck should be performed for reducing the maintenance cost of track. The serviceability review of track contains that the compression force which is occurred on fastener of end bridge should be smaller than the compression force causing the deformation limit of elastic pad and the uplift force which is occurred on fastener of end abutment should be smaller than initial fastening force. Therefore, this study calculated the deflection and end rotation of the railway bridge according to the span length and stiffness of railway bridge and estimated the compression force and uplift force which are occurred on the track of end bridge using the finite element method. This study indicated the several diagrams that are contained the correlation between the behaviour of the track and the behaviour of the railway bridge. As a result, to reduce the end rotation of the railway bridge is very efficient to increase the height of railway deck.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.127-132
• /
• 2003

The purpose of current study is about how to construct wall-type APT in slip form and Deck plate applied different connection of materials that wall and slab. A proposal construct's solution is using the continuous a binding string that the main of contents are slab or stairs which horizon structure part construction is joined the vertical structure part, new we Proposed of 2 solution that new technology development. We'll suggest that the development is in the construct of higher stories APT more better other construction method. We expect that the new method is good but we have many things to solute themes. Thus, we decided that this development contents are needed that correct structural investigation and constructor's security of speciality and through a fact construct, correct verification.

• 콘크리트학회논문집
• /
• 제27권4호
• /
• pp.387-397
• /
• 2015

본 연구에서는 시공성 향상을 위해 데크플레이트와 비정질강섬유 콘크리트를 적용하여 현장 무배근 슬래브 시스템을 연구하였다. 제안한 슬래브에서는 온도철근을 강섬유로 대체하였다. 본 연구는 연속슬래브에서 상부 철근이 연속되지 않는 경우 슬래브의 상부 균열 제어를 주로 고려하였다. 실험변수로 비정질강섬유 혼입량, 강섬유 종류, 데크플레이트 종류, 연속구간의 철근 이음을 고려하였으며, 수직하중을 받는 2경간 슬래브를 실험하였다. 슬래브의 균열저항성능을 평가하기 위하여 연속슬래브의 하중에 따른 균열폭을 계측하였다. 실험결과, 상부 이음철근을 사용하지 않더라도 합성슬래브의 높은 휨강성으로 인하여 균열을 억제할 수 있는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권1호
• /
• pp.126-133
• /
• 2017

본 연구는 원형 천공된 플랫 형태와 팔각형 형태의 중공을 가지는 슬래브의 전단강도를 평가하고 있다. 최근 건축구조물에서 슬래브 두께에 대한 증가와 품질관리에서 요구되는 수준이 상향됨에 따라 프리캐스트 중공 슬래브 시스템에 대한 관심이 증가하고 있다. 중공 슬래브 시스템은 널리 알려진 바와 같이 슬래브의 자중을 감소시킬 수 있는 효율적인 바닥시스템이다. 하지만 중공슬래브는 전단에 저항하는 슬래브 웨브의 콘크리트 면적 감소로 전단강도 성능이 저하될 수 있다. 특히, 프리캐스트 중공슬래브는 PC 슬래브 데크의 접합면이 발생하며, 접합면의 균열로 인한 전단파괴가 일어나지 않도록 방지하여야 한다. 본 연구에서는 I-슬래브 시스템의 전단강도를 평가하기 위하여 3점 가력에 의한 주축 및 직교축에 대한 전단 실험을 실시하였다. 실험결과 I-슬래브가 PC 접합면이 포함되어짐에도 불구하고 이론강도에 대하여 충분한 전단강도 성능을 보유하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.791-796
• /
• 2000

Purpose of this study is to analyze the characteristics and reinforcement effects of restored the RC bridge deck with small precast panel through static load tests and to provide the basic information for the damaged slab decks. In the tests for realizing movement of general RC bridge slabs, 6 samples are prepared and tested. All reinforced samples are restored with 1 or 2-layers precast panels by epoxy mortar. The movement of restored slabs is analyzed and compared with the behavior of non-restored slabs. In result of these tests, tension cracks due to bending moment are show, and after static load test there happens finally a punching shear failure, which is the general type of RC bridge failure. The tests show that restoration of the RC slab results in increasing of loading capacity about 30~50% an restoring panels are stick to slab and moving with slab under loading test.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.355-362
• /
• 2001

This study deals with cracking control of concrete deck in steel-concrete composite bridges according to the concrete slab casting sequences. In correlation studies between casting sequences, time dependent effects of concrete creep and shrinkage are implemented in the analytical model. Finally, the methods of cracking control in terms of concrete slump and relative humidity are suggested to prevent early transverse cracking of concrete slab.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.202-205
• /
• 2003

The purpose of this experimental study is to understand the flexural Behavior of structural deck plate continuous slabs (power deck plate slabs). The main variables considered in this test are thickness of the slab and the deck plate. Five specimens that have length of 600cm and width of 60cm were manufactured. Test results indicated that the ultimate flexural strength of power deck plate slabs was conservative compared to ACI flexural provisions. But, suitable arrangement of bar of top reinforcement is needed for crack control.

• Steel and Composite Structures
• /
• 제49권1호
• /
• pp.19-30
• /
• 2023

Steel-concrete composite slabs represent a very efficient floor solution combining the key performance of two different materials: the steel and the concrete. Composite slab response is governed by the degree of the interaction between these two materials, mainly depending by chemical and mechanical bond. The latter is characterized by a limited degree of confinement if compared with the one of the rebars in reinforced concrete members while the former is remarkably influenced by the type of concrete and the roughness of the profiled surface, frequently lubricated during the cold-forming manufacturing processes. Indeed, owing to the impossibility to guarantee a full interaction between the two materials, a key parameter governing slab design is represented by the horizontal shear-bond strength, which should be always experimentally estimated. According to EC4, the design of the slab bending resistance, is based on the simplified assumption that the decking sheet is totally yielded, i.e., always in plastic range, despite experimental and numerical researches demonstrate that a large part of the steel deck resists in elastic range when longitudinal shear collapse is achieved. In the paper, the limit strain for composite slab, which corresponds to the slip, i.e., the debonding between the two materials, has been appraised by means of a refined numerical method used for the simulation of experimental results obtained on 8 different composite slab types. In total, 71 specimens have been considered, differing for the properties of the materials, cross-section of the trapezoidal profiled metal sheets and specimen lengths.

• 도로교통
• /
• 통권78호
• /
• pp.24-33
• /
• 1999

• 한국철도학회논문집
• /
• 제12권1호
• /
• pp.95-103
• /
• 2009

교대나 교각 위 교량 슬래브 단부의 변형은 궤도 틀림이나 유지보수의 주요 원인이 되고 있으며, 특히 콘크리트 슬래브궤도가 설치되는 경우에는 궤도구조의 강성과 교량 슬래브와의 일체 성으로 레일 및 지지구조의 사용성에 심각한 영향을 미치는 변형과 추가하중이 발생하게 된다. 이번 연구에서는 교량 슬래브 단부 변형으로 인해 발생하는 궤도구조의 사용성에 영향을 미치는 인자를 파악하고 매개변수 해석을 통해 변수 별 영향 정도를 파악하였다. 연구 결과 단경간교 보다 연속교가 레일 지지점 하중 감소에 유리하고, 마지막 레일 지지점과 교량받침 사이 간격, 교량받침 강성, 체결구 강성이 사용성에 큰 영향을 미치는 것으로 분석되었다.