• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.78-84
• /
• 2016

The FHX (Forced-draft sodium-to-air Heat Exchanger) employed in the ADHRS (active decay heat removal system) is a shell-and-tube type counter-current flow heat exchanger with M-shape finned-tube arrangement. Liquid sodium flows inside the heat transfer tubes and atmospheric air flows over the finned tubes. The unit is placed in the upper region of the reactor building and has function of dumping the system heat load into the final heat sink, i.e., the atmosphere. Heat is transmitted from the primary cold sodium pool into the ADHRS sodium loop via DHX (decay heat exchanger), and a direct heat exchange occurs between the tube-side sodium and the shell-side air through the FHX tube wall. This paper describes the DHRS and the structural design of the FHX.

• 한국식품영양과학회지
• /
• 제23권2호
• /
• pp.315-321
• /
• 1994

In order to prevent the postharvest decay and to promote the freshness retention of fruits and vegetables grapefruit seed extract(GFSE), natural microorganism control agent, was applied to the preservation of fresh fruits and vegetables. Freshfruits and vegetables treated with GFSE and stored in polyethylene film (0.1mm) at 1$0^{\circ}C$-15$^{\circ}C$ of natural low temperature low kept better qualities in color and texture than the GFSE -not- treated control. The treatment using GFSE ina 250ppm to 500ppm concentration seemed to be an effective one for the control of Botrytis cinerea isolated in red wine grapes. After 4 weeks of storage the firmness rate of cucumbers treated with the dilute GFSE was four times higher than that of non-treated ones. GFSE showed effective inhibitory action towards plant pathological bacteria and fungi which were involved in the decay of fruits and vegetables. Minimum inhibitory concentrations of GFSE towards them were in the range of 250ppm to 500ppm .Direct visualization of microbial cells and spores using electron microscopy showed microbial cells and fungal spores the function of which was destroyed by treating with the dilute solutions of GFSE. It was observed that GFSE would reduced disease damages and have bactericide & fungicide properties during the storage of such fruits and vegetables as egg plant, wild edible greens , kumquat, and kiwi fruit.

• Bulletin of the Korean Chemical Society
• /
• 제19권7호
• /
• pp.747-753
• /
• 1998

The phoisomerization process of symmetric carbocyanine dyes such as 3,3'-diethyloxadicarbocyanine iodide (DODCI), 3,3'-diethylthiadicarbocyanine iodide (DfDCI), 1,1'-diethyl-2,2'-dicarbocyanine iodide (DDI), 1,1'-diethyl-2,2'-carbocyanine iodide (DCI), and cryptocyanine (1,1'-diethyl-4,4'-carbocyanine) iodide (CCI) have been studied by measuring the steady state and time resolved fluorescence spectra and the ground-state recovery profiles. The steady-state fluorescence spectrum of photoisomer as a function of concentration and excitation wavelength provides the evidence that the fluorescence of photoisomer is formed by the radiative energy transfer from the normal form and the quantum yield for the formation of photoisomer is increased by decreasing the excitation wavelength. The fluorescence decay profiles have been measured by using the time correlated single photon counting (TCSPC) technique, showing a strong dependence on the concentration and the detection wavelength, which is due to the formation of excited photoisomers produced either by the radiative energy transfer from the non-nal form or by absorbing the 590 nm laser pulse. We first report the fluorescence decay time of photoisomers for these cyanine dyes. The experimental results are explained by introducing the semiempirical calculations. The ground state recovery profiles of DTDCI, DDI, and CCI normal forms have been measured, showing that the recovery time from the singlet excited state is similar with the fluorescence decay time.

• Korean Chemical Engineering Research
• /
• 제56권6호
• /
• pp.878-883
• /
• 2018

A circulating fluidized bed (CFB) has been used in various chemical industries because of good heat and mass transfer. In addition, the methanol to olefins (MTO) process requiring the CFB reactor has attracted a great deal of interest due to steep increase of oil price. To design a CFB reactor for MTO pilot process, therefore, we has examined the hydrodynamic properties of spherical catalysts with different particle size and developed a correlation equation to predict catalyst holdup in a riser of CFB reactor. The hydrodynamics of micro-spherical catalysts with average particle size of 53, 90 and 140 mm was evaluated in a $0.025m-ID{\times}4m-high$ CFB riser. We also developed a model described by a decay coefficient to predict solid hold-up distribution in the riser. The decay coefficient developed in this study could be expressed as a function of Froude number and dimensionless velocity ratio. This model could predict well the experimental data obtained from this work.

• 대한토목학회논문집
• /
• 제26권3A호
• /
• pp.439-445
• /
• 2006

터널과 같이 구조물의 크기가 매질의 영역에 비하여 상대적으로 작은 경우와 같은 무한영역의 문제는 유한요소법을 적용하여 해석할 수 있으나 해석의 정밀도를 높이기 위해서는 해석영역을 크게 선정하게 되어 계산량이 증가하고, 인위적인 경계조건에 의한 오차의 영향을 피할 수 없다. 이를 개선하기 위해 관심영역은 유한요소로 모델링하고 무한영역은 무한요소로 모델링하는 혼합법을 적용하면 보다 효과적이다. 본 연구에서는 다양한 감쇠함수를 적용한 등매개변수형 무한요소를 제안하였고 매개변수해석을 통하여 터널해석에 적합한 감쇠함수의 특성치를 제시하였다. 또한 이를 적용한 3차원 혼합모델이 터널 해석에 유효함을 입증하였다.

• 한국지반공학회논문집
• /
• 제28권3호
• /
• pp.45-54
• /
• 2012

최근 쓰레기 매립장에 널리 사용되고 있는 토목섬유는 흙과의 접촉면에서 대변형 거동 및 변형율 연화 등의 전단거동 특성을 보이는데, 이는 토목섬유-흙 접촉면에서 함수비, 연직응력, 화학적 요소의 영향 등 고유물성에 기인한다. 본 연구에서는 침출수 내의 산성 및 염기성과 같은 성분의 영향이 진동하중 상태에서 토목섬유-흙 접촉면의 전단강도 감소에 미치는 영향을 분석하였다. 이를 위하여 이미 구축된 다기능 접촉면 시험기(M-PIA)를 수정 제작하고 200일간 수침시킨 토목섬유와 흙 시료를 이용하여 진동 직접전단시험을 수행하였고, 그 결과 교란상태개념에 기초하여 화학적 인자들에 의한 토목섬유-흙 접촉면의 화학적 전단강도 감소 특성을 교란도 함수로써 확인하였다. 또한 전계방출주사현미경(FIB)을 이용하여 화학적 인자에 따른 흙입자 및 접촉면 손상의 차이를 확인하였다.

• International Journal of Advanced Culture Technology
• /
• 제6권3호
• /
• pp.151-162
• /
• 2018

In deriving the economic order quantity (EOQ) formula, it is tacitly assumed that the buyer has to pay product price while receiving the product from the supplier. However, as a marketing policy, some suppliers permit a delay in payments to the buyers to increase demand for the product they made. Credit transactions would have a positive effect on both suppliers and buyers. For a supplier who offers trade credit, it is an effective means of price differentiation to increase the demand for the product. Availability of opportunity to delay the payment in buyer effectively reduces the cost of holding stocks and therefore, the buyer has a lot of price options to choose his sales price for a customer. Since the buyer's order is affected by the customer's demand, the problems of determining the sales price and EOQ are interdependent and must be solved simultaneously. From this perspective, this paper evaluates the problem of determining the optimal sales price and EOQ for the buyer at the same time when the supplier allows a delay in payments for the product whose demand is represented as a function that decreases linearly with the sales price. For the analysis, it is also assumed that inventory is exhausted not only by customer's but also by decay.

• 한국의류학회지
• /
• 제40권2호
• /
• pp.240-257
• /
• 2016

This study determines the effect of 3D compression pants and Kinesio taping on muscular function of the leg during knee joint flexion and extension. Eight males participated in the experiment, wearing basic pants (BP), Kinesio taping on bare skin (KT), 3D compression pants with (KTP) and without Kinesio taping (CP). The test protocol for isokinetic muscular function was composed of four sets at three angular velocities (60, 180, $240^{\circ}/sec$) using Cybex 660. Peak torque and work per repetition of the lower limbs of eight males were analyzed from the result of Cybex. Agility and power of the subjects were examined from side step and sergeant jump. Peak torque, average power, work per repetition, force decay time of subjects wearing CP and KTP were significantly better than BP or KT, especially at low angular velocity of $60^{\circ}/sec$. The time to generate peak torque of subjects wearing BP was the longest, while the force-decay time of BP was the shortest. The application of Kinesio tape on skin did not increase muscle peak torque, work and power, but did shorten the time to generate peak torque.

• Communications for Statistical Applications and Methods
• /
• 제6권3호
• /
• pp.849-860
• /
• 1999

This paper addresses the issue of estimating regression function with errors in variables using wavelets. We adopt a nonparametric approach in assuming that the regression function has no specific parametric form, To account for errors in covariates deconvolution is involved in the construction of a new class of linear wavelet estimators. using the wavelet characterization of Besov spaces the question of regression estimation with Besov constraint can be reduced to a problem in a space of sequences. Rates of convergence are studied over Besov function classes $B_{spq}$ using $L_2$ error measure. It is shown that the rates of convergence depend on the smoothness s of the regression function and the decay rate of characteristic function of the contaminating error.

• 대한기계학회논문집B
• /
• 제22권8호
• /
• pp.1083-1090
• /
• 1998

A kind of three-way check valve, so called hydraulic calve was proposed for the substitute of the density lock of passive reactor such as SPWR (System-Integrated Pressurized Water Reactor). The function of the valve are the separation of the borated water from main coolant loop for normal operation and the insurge of the water into the loop for shutdown and the removal of the decay power when the main coolant flow rate is not enough. To verify the operability and the characteristics of the valve, experimental works were executed with 1/3 scale model calve. Also a diffuser model was proposed for the theoretical analysis of the valve.