• 한국안전학회지
• /
• 제31권2호
• /
• pp.49-56
• /
• 2016

In Korea, there exist many mountains, and sudden storms occur during the summer season. When severe rainstorm events occur in steep slope topography, risk of debris flow is increased. Once debris flow occurs in urban area, it may cause casualties and physical damages due to rapid debris flow velocity along a steep slope. Accordingly, preventing method of sediment-related disaster for demage mitigation are essential. Recently, various studies on debris flow have been conducted. However, the prediction of the physical propagation of debris flow along the steep slope was not thoroughly investigated. Debris flow is characterized by various factors such as topography, properties of debris flow, amount of debris flow. In the study the numerical simulation was focused on the topographic factor. Fundamental analysis of the risk area was implemented with emphasis on the propagation length, thickness, and the development of maximum velocity. The proposed results and the methodology of estimating the structural vulnerability would be helpful in predicting the behavior and the risk assessment of debris flow in urban area. These results will be able to estimate the vulnerability of urban areas affected the most damage by debris flow.

• 한국방재학회 논문집
• /
• 제10권1호
• /
• pp.49-55
• /
• 2010

본 연구에서는 토석류를 비압축성의 불안정한 유체로 가정하여 토석류의 피해범위를 시뮬레이션하는 GIS 기반의 프로그램의 개발에 대해 다루고 있다. 개발된 Debris Flow Analyzer 프로그램은 입력된 DEM을 완만하게 재정리한 후, 대상지역에 대한 경사, 토석류 이동 방향, 계곡을 추출한 결과와 토석 부피, 물 부피, 속도, 유효 점도, 동적 마찰계수를 취합하여 유한차분법을 적용하여 시간에 따른 토석류 이동 형태를 시뮬레이션하게 된다. 또한 이러한 시뮬레이션 결과를 Google Earth에 표현하여 토석류 재해지도의 활용성을 개선하고자 하였다.

• 한국주거학회논문집
• /
• 제20권3호
• /
• pp.77-84
• /
• 2009

The construction debris has been enormously increased since 90's because of a reconstruction and developing a new building site. Under the construction law, construction debris must legally recycle or reclaim at cost, but almost people have depended on reclamation of the illegal process to treat construction debris. Therefore, the environmental disruption and contamination have been begun the hot issue of society and in controversy with residents. With the consequence that indicates a substitute about an application of construction debris units is the most important thing for studying construction debris of quantity when the construction units are demolished. Nowadays, the area under the housing environment amelioration policies is getting rapidly old, then it is beyond anticipating reconstruction. Before construction units are demolished, generally three of four engineers investigate or predict the quantity of construction debris for two months. But this study is using the units of construction debris instead of the investigation and gets more precise data than investigation or prediction. In conclusion, the purpose of this study offers that units of construction debris can alternate the investigating of construction debris and curtail the expenses of labors and finances. Finally, those effects are going to make economical benefits covering the whole of the process of constructions.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.738-744
• /
• 2018

Fuel failure due to debris is a major cause of failure in pressurized water reactors. Fuel vendors have developed various filtering devices to reduce debris-induced failure and have evaluated filtering performance with their own test facilities and methods. Because of the different test facilities and methods, it is difficult to compare filtering performances objectively. This study presents an improved filtering test and an efficiency calculation method to fairly compare fuel-filtering efficiency regardless of the vendor's filtering features. To enhance the reliability of our evaluation, we established requirements for the test method and had a facility constructed according to the requirements. This article describes the debris specimens, the amount of debris, and the replicates for the proposed test method. A calculation method of comprehensive debris-filtering efficiency using a weighted mean is proposed. The test method was verified by repeated tests, and the tests were carried out using the PLUS7 and 17ACE7 test fuels to calculate the comprehensive debris-filtering efficiencies. The evaluation results revealed that the filtering performance of PLUS7 is better than that of 17ACE7. The proposed method can be used on any kind of debris-filtering devices and is appropriate for use as a standard.

• 한국안전학회지
• /
• 제30권3호
• /
• pp.52-58
• /
• 2015

As sudden rainfall has happened, the debris flow has occurred in the mountain area. Recently sudden rainfall occurred so frequently caused by abnormal climate. Thus debris flow hazard had consecutively increased damage because of debris flow. Recently, Enormous damage due to debris flow have occurred in Korea. Various studies have been conducted to prevent search debris flow hazard. This study was carried out for debris flow behavior according to the land slope on propagation. It is the important one among factors that are related to the propagation over the city with respect to debris flow discharge and depth. For the numerical simulations in this study, the land slope was varied of 5, 0, $-5^{\circ}$ to investigate the debris flow behavior with the FLO-2D, often recommended by FEMA to simulate debris flow. To verify the performance of FLO-2D, comparison with the USGS experiments (Iverson et al, 2010) was conducted. From numerical results the propagation length of the debris flow was found the most sensitive one. Maximum of debris flow thickness and velocity and structural vulnerabilities were investigated to the effect of land slope. They was became smaller according to land slope of 5, -5, $0^{\circ}$ in the order. As a result, debris flow behavior analysis about the effect of the land slope could contribute to understand the vulnerability of city for debris flow hazards.

• 산업기술연구
• /
• 제36권
• /
• pp.57-63
• /
• 2016

In this study characteristics of debris flow landslide were investigated on the focus of debris flow disaster occurred by heavy rainfall in 2013 at Goeun-ri around Kaeryoung Mt. in Chuncheon-si. Appropriate method for estimating scale of debris flow was investigated by comparing those values from soil loss by Universal Soil Loss Equation, debris flow yield rate obtained by field survey of investigating debris flow path from initiation and erosion to deposition and other methods. As results of this study, it might be an opportunity of contributing to construct the data base for determining the size of erosion control facilities in future.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.698-707
• /
• 2010

Because of localized extreme rainfall followed by Typhoon Ewiniar in 2006, a lot of landslides and debris flows were occurred in Jinbu area of Gangwon Province. Field investigation performed in this area found that it can be divided into three categories i.e. large debris flow, small debris flow, and debris flow around forest road. We performed field investigation especially for the sites where debris flow occurred around forest road. And the characteristics of the debris flow around forest road were analyzed and compared with the other site of debris flow.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.314-320
• /
• 1998

Wear debris morphology is closely related to the wear mode and mechanism occured. Image recognition of wear debris is, therefore, a powerful tool in wear monitoring. But it has usually required expert's experience and the results could be too subjective. Development of automatic tools for wear debris recognition is needed to solve this problem. In this work, an algorithm for automatic wear debris recognition was suggested and implemented by PC base software. The presented method defined a characteristic 3-dimensional feature space where typical types of wear debris were separately located by the knowledge-based system and compared the similarity of object wear debris concerned. The 3-dimensional feature space was obtained from multiple feature vectors by using a multi-dimensional scaling technique. The results showed that the presented automatic wear debris recognition was satisfactory in many cases application.

• Tribology and Lubricants
• /
• 제15권2호
• /
• pp.206-211
• /
• 1999

Wear debris morphology is closely related to the wear mode and mechanism occured. Image recognition of wear debris is, therefore, a powerful tool in wear monitoring. But it has usually required expert's experience and the results could be too subjective. Development of automatic tools for wear debris recognition is needed to solve this problem. In this work, an algorithm for automatic wear debris recognition was suggested and implemented by PC base software. The presented method defined a characteristic 3-dimensional feature space where typical types of wear debris were separately located by the knowledge-based system and compared the similarity of object wear debris concerned. The 3-dimensional feature space was obtained from multiple feature vectors by using a multi-dimensional scaling technique. The results showed that the presented automatic wear debris recognition was satisfactory in many cases application.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.846-850
• /
• 2007

In this study debris like branch or trash are washed and flowed from land to stream by rainfall runoff at mountain or urban stream specially rainy season. These kinds of debris are accumulated at hydraulic construct on the way of flow along the stream. The shape or ratio of like these accumulated debris are various according to the location where it is accumulated and the material what it is, so that it is influenced to be varied to flow characteristics. To be simple of accumulated debris shape, it was made experiments though the variation of open ratio and the shape of accumulated debris by lab experiment using straight channel with two piers. From the result, the water level is inverse proportion to open ratio, and the water level more sensitive to the debris‘ width than length at the same area of accumulated debris.