• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.178-184
• /
• 2015

This paper proposes a hardware architecture for high performance Deblocking filter(DBF) in High Efficiency Video Coding for UHD(Ultra High Definition) videos. This proposed hardware architecture which has less processing time has a 4-stage pipelined architecture with two filters and parallel boundary strength module. Also, the proposed filter can be used in low-voltage design by using clock gating architecture in 4-stage pipeline. The segmented memory architecture solves the hazard issue that arises when single port SRAM is accessed. The proposed order of filtering shortens the delay time that arises when storing data into the single port SRAM at the pre-processing stage. The DBF hardware proposed in this paper was designed with Verilog HDL, and was implemented with 22k logic gates as a result of synthesis using TSMC 0.18um CMOS standard cell library. Furthermore, the dynamic frequency can process UHD 8k($7680{\times}4320$) samples@60fps using a frequency of 150MHz with an 8K resolution and maximum dynamic frequency is 285MHz. Result from analysis shows that the proposed DBF hardware architecture operation cycle for one process coding unit has improved by 32% over the previous one.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.354-356
• /
• 2013

ITU와 ISO/IEC가 공동으로 UHD급 영상 부호화를 위해 표준화를 진행하고 있는 HEVC 코덱은 H.264/AVC 대비 2배 이상의 압축 효율을 갖는 것을 목표로 정하고 있다. HEVC(High Efficiency Video Coding)는 In-Loop Filter 기술로 H.264/AVC에서 사용하고 있는 Deblocking Filter와 새롭게 추가 된 SAO(Sample Adaptive Offset)를 사용하고 있다. 본 논문에서는 HEVC의 In-Loop Filter 기술 중 하나인 SAO의 기술의 EO에서 Category를 조금 더 정확하게 판단하여 분류하는 방법을 제안을 한다.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.831-834
• /
• 2003

본 논문에서 기술하고 있는 디블로킹 필터는 ISO/1EC 14496-2 의 디블로킹 필터링 알고리즘[1][2]을 기반으로 한다. 한 개의 레지스터 뱅크를 이용한 효율적인 데이터 스케줄링을 통해 면적과 전력 측면에서 디블로킹 필터를 사용함으로써 생기는 오버헤드를 최소화 시켰으며, CIF 급 영상을 27MHz 동작주파수에서 실시간으로 처리할 수 있도록 설계 하였다. 0.25㎛ Standard Cell Library 로 합성한 결과 총 9800 게이트로 구성 되었으며, 외부 메모리의 도움 없이 동작 시키기 위해 4.4KByte의 버퍼가 사용되었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.557-559
• /
• 2015

움직임 보상 기반 프레임율 변환(Frame rate up-conversion based on motion compensation )에서 발생하는 블로킹 현상(Blocking artifact)을 줄여 영상의 화질을 높이기 위한 디블로킹 필터(De-blocking filter) 방법을 제안한다. 이 방법은 블록 단위로 동작하는 움직임 보상 과정에서 주변 블록과의 움직임이 급격히 달라지는 폐색영역에서 발생하는 블로킹 현상을 크게 줄일 수 있다. 제안하는 방법은 기존의 필터링을 하지 않는 방법보다 화질이 약 0.01db 향상하였다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.111-111
• /
• 1993

Anthracycline의 합성에 있어서 aglycone 뿐만 아니고 sugar도 대단히 중요한 역할을 한다. Anthracycline에 이용되는 sugar인 daunosamine의 전합성의 확립을 통하여 daunosamine의 anlogue을 합성할 목적으로 daunosamine의 전합성을 검토하고 있다. Methyl D-mannopyranoside을 원료로 하여 0-methylation, PhCH(OMe)$_2$ 에 의한 OH의 보호, n-BuLi을 이용한 위치선택적 deblocking, oxime생성, 이어서 Vitride를 이용한 환원으로 daunosamine 합성에 있어서 중요한 중간체인 methyl-3-amino-4,6-benzylidene-2,3-dideoxy-$\alpha$-D-hexopyranoside을 합성하였다.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1284-1288
• /
• 2003

A very short and concise synthetic route for a novel acyclic version of d4T is described. The required quaternary carbon was successfully installed using a [3,3]-sigmatropic rearrangement. The condensation of the mesylates 16-18 with an adenine base under standard nucleophilic substitution conditions ($K_2CO_3$, 18-Crown- 6, DMF) in addition to deblocking afforded the target acyclic nucleosides 22-24. In addition, the antiviral evaluations against various viruses were performed.

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.46-51
• /
• 2010

Polyorganosiloxane modified polyurethane (PDMS-PU) polymers were prepared from copolymerization of ${\alpha}$,${\omega}$-hydroxypropyl terminated polyorganosiloxane with isophorone diisocyanate (IPDI), polypropylene glycol (PPG), and 2,2-bis(hydroxymethyl) propionic acid (DMPA). Hydrophobic polyorganosiloxane was introduced in polyurethane main chain as soft segment block unit. The isocyanate groups in PDMS-PU block copolymer was blocked with 2-butanon oxime and obtained PDMS-PU dispersions in water by neutralizing with triethylamine (TEA). The deblocking temperature of PDMS-PU polymer was measured from thermal analysis. The good stability of the PDMS-PU dispersion was obtained by dispersing into water. PDMS-PU prepolymers were prepared with various contents of DMPA under [NCO]/[OH] = 1.12~1.53 equivalent ratio. Increasing DMPA from 7.2, 13.4, and 18.7 mole% in preparation of PDMS-PU polymer, particle sizes were decreased from 156, 100, 65 dnm. Also contact angle and adhesive strength were measured.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.15-27
• /
• 2017

CRA(Conditional Replenishment Algorithm) was proposed to improve the visual quality of SC-MMH(Service Compatible 3DTV using Main and Mobile Hybrid delivery) which is a kind of hybrid 3DTV system and has been standardized by ATSC. In SC-MMH system, reference view and additional view may have different resolutions and/or encoding methods. To reconstruct 3D view, additional view needs to be enlarged as same as reference view. Although the performance of CRA is quite satisfactory, there may exist some blocky artifacts in the enlarged view since it adopts block-shaped processing unit with quad-tree structure. In this paper, we analyze the main causes of blocky artifacts in CRA and show these artifacts can be successfully suppressed by applying the deblocking filter at receiver side.

• Journal of Adhesion and Interface
• /
• v.17 no.2
• /
• pp.67-71
• /
• 2016

In this study, low-viscosity polyurethane hot-melt were synthesized with polyether polyol / polyester polyol, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), 2-butanone oxime (MEKO) to improve the properties and peel strength. The properties of the synthesized low-viscosity polyurethane hot-melt was evaluated through FT-IR, viscosity meter and UTM. When the content of the reactive diluent increases and the NCO-blocked prepolymer decreases, the viscosity of low-viscosity polyurethane hot-melt adhesive was increased. When the ratio of OH-terminated oligomer, NCO-blocked prepolymer and content of reactive diluent is 1 : 0.5 : 0.5, low-viscosity polyurethane hot-melt showed 1.1 kgf/cm peel strength.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.249-257
• /
• 2005

Polyurethane(PU) prepolymers were prepared from polyol and diisocyanate. Unionized PU prepolymers were synthesized from poly(propylene glycol)(PPG, MW: 1000), 2,2-bis (hydroxymethyl) propionic acid(DMPA), and isophorone diisocyanate(IPDI) by prepolymer syhthesizing process. After PU prepolymers were dispersed into water, the physical properties were investigated by changing the molar ratio of polyol and diisocyanate. The results showed a stable state with the best physical properties when the prepolymer was composed of PPG/DMPA with hard segment=40%, NCO%=3.43%, [NCO]: [OH]=1.5: 1.0 in molar ratio, and was dispersed into water with 30% solid content. PU prepolymers also were synthesized with various molar ratio of PPG and DMPA. Upon higher molar ratio of DMPA, particle size of polyurethane dispersion(PUD) gradually decreased. PU-prepolymers prepared from the various blocking agents represented characteristic initial deblocking temperatures that depended on the blocking agents, and the beginning of deblocking occured within 30 mins on all the blocking agents used.