• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.115-121
• /
• 2015

Stand-alone inverter supplies constant voltage to loads. However, when a three-phase stand-alone inverter supplies unbalanced load, the generated output voltages also become unbalanced. The nonlinear characteristics of inverter dead time cause a more serious distortion in the output voltage. With unbalanced load, voltage distortion caused by dead time differs from voltage distortion under balanced load. Phase voltages in the stationary reference frame include unbalanced odd harmonics and then, d-q axis voltages in the synchronous reference frame have even harmonics with different magnitude, which are mitigated by the proposed multiple resonant controller. This study analyzes the voltage distortion caused by unbalanced load and dead time, and proposes a novel dead time compensation method. The proposed control method is tested on a 10-kW stand-alone inverter system, and shows that total harmonic distortion (THD) is reduced to 1.5% from 4.3%.

• Earthquakes and Structures
• /
• 제5권5호
• /
• pp.589-605
• /
• 2013

The effect of dead loads on dynamic responses of a uniform elastic beam subjected to moving loads is examined by means of a governing equation which takes into account initial bending stresses due to dead loads. First, the governing equation of beams which includes the effect of dead loads is briefly presented from the author's paper (1990, 1991, 2010). The effect of dead loads is considered by a strain energy produced by conservative initial stresses caused by the dead loads. Second, the effect of dead loads on dynamical responses produced by moving loads in simply supported beams is confirmed by the results of numerical computations using the Galerkin method and Wilson-${\theta}$ method. It is shown that the dynamical responses by moving loads are decreased remarkably on a heavyweight beam when the effect of dead loads is included. Third, an approximate solution of dynamic deflections including the effect of dead loads for a uniform beam subjected to moving loads is presented in a closed-form for the case without the additional mass due to moving loads. The proposed solution shows a good agreement with results of numerical computations with the Galerkin method and Wilson-${\theta}$ method. Finally it is clarified that the effect of dead loads on elastic uniform beams subjected to moving loads acts on the restraint of the transverse vibration for the both cases without and with the additional mass due to moving loads.

• Structural Engineering and Mechanics
• /
• 제42권6호
• /
• pp.761-781
• /
• 2012

The collapse of structures due to snow loads on roofs occurs frequently for steel structures and rarely for reinforced concrete structures. Since the most significant difference between these structures is related to their ability to handle dead loads, dead loads are believed to play an important part in the collapse of structures by snow loads. As such, the effect of dead loads on displacements and stress couples produced by live loads is presented for plates with different edge conditions. The governing equation of plates that takes into account the effect of dead loads is formulated by means of Hamilton's principle. The existence and effect of dead loads are proven by numerical calculations based on the Galerkin method. In addition, a closed-form solution for simply supported plates is proposed by solving, in approximate terms, the governing equation that includes the effect of dead loads, and this solution is then examined. The effect of dead loads on static live loads can be explained explicitly by means of this closed-form solution. A method that reflects the effects of dead loads on live loads is presented as an example. The present study investigates an additional factor in lightweight roof structural elements, which should be considered due to their recent development.

• 대한토목학회논문집
• /
• 제26권4A호
• /
• pp.701-706
• /
• 2006

이 논문은 콘크리트 교량의 내하력 평가에서 고정하중이 차지하는 응력을 현장측정 기법으로 평가하는 방법을 제시한 것이다. 이론적인 구조계산에만 의존하고 있는 고정하중에 대한 응력평가는 열화된 교량의 실제응력을 충분하게 반영하지 못하고 있는 실정이다. 따라서 이러한 문제점을 극복하기위한 방법으로 부분절단법을 제시하였으며 이 방법은 외부의 추가적인 하중재하없이 순수 고정하중에 의해 유발된 부재응력을 현장에서 직접적으로 측정할 수 있도록 고안된 것이다. 부분절단법의 적용은 기존의 이론적인 구조계산방법을 보완하고 보다 실질적인 고정하중 응력을 반영할 수 있게 된다. 제안된 현장 측정 방법의 적용성은 기존평가방법과 비교하여 검증하였다.

• Structural Engineering and Mechanics
• /
• 제48권4호
• /
• pp.467-477
• /
• 2013

Municipalities in the United Arab Emirates approve reinforced concrete design of building structures to follow either the ACI 318 or the BS 8110 code. Since the requirements of these codes are different from each, there is a need to compare the structural demand in the two codes. The main objective of this study is to compare the design requirements of the ACI 318 code with the BS 8110 code for the flexural, shear and axial compression limit states. The load factors and load combinations in the two codes are also compared. To do so, a large number of cross-sections with different geometries, material properties, and reinforcement ratios are analyzed following the procedures in the two codes. The relevant factored load combinations in the two codes are also investigated for a wide range of live-to-dead load ratios and for various wind-to-dead load ratios. The study showed that the differences between the design capacities in the ACI 318 and BS 8110 codes are minor for flexure, moderate for axial compression, and major for shear. Furthermore, the factored load combinations for dead load, live load and wind in the two codes yield minor-to-moderate differences, depending on the live-to-dead load ratio and intensity of wind.

• Earthquakes and Structures
• /
• 제1권4호
• /
• pp.411-425
• /
• 2010

The effect of dead loads on dynamic responses of uniform elastic beams is examined by means of a governing equation which takes into account initial bending stress due to dead loads. First, the governing equation of beams which includes the effect of dead loads is briefly presented from the author's paper (Takabatake 1990). In the formulation the effect of dead loads is considered by strain energy produced by conservative initial stresses produced by the dead loads. Second, the effect of dead loads on dynamical responses produced by live loads in simply supported beams and clamped beams is confirmed by the results of numerical computations with the Galerkin method and Wilson-${\theta}$ method. It is shown that the dynamical responses, like dynamic deflections and bending moments produced by dynamic live loads, are decreased in a heavyweight beam when the effect of dead loads is included. Third, an approximate solution for dynamic deflections including the effect of dead loads is presented in closed-form. The proposed solution shows good in agreement with results of numerical computations with the Galerkin method and Wilson-${\theta}$ method. Finally, a method reflecting the effect of dead loads for dynamic responses of beams on the magnitude of live loads is presented by an example.

• 전력전자학회논문지
• /
• 제10권1호
• /
• pp.38-44
• /
• 2005

전압형 인버터에서 데드 타임은 직류단 단락을 방지하기 위하여 필요하다. 데드 타임 효과는 출력 전압, 출력 전류의 왜곡으로 나타난다. 최근 많은 논문에서 데드 타임 보상 방법에 대한 연구가 이루어졌다. 본 논문에서는 데드타임을 보상하는 것이 아니라 데드 타임이 없는 인버터를 제안한다. 부하전류를 측정할 필요도 없으며 데드 타임보상을 위한 계산도 필요 없다. 이는 인버터의 각 레그에 트랜스포머를 추가함으로써 가능하다. 제안된 방법의 각 모드 해석이 선행되고 타당성을 위한 시뮬레이션 결과가 제시된다.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.425-435
• /
• 2016

This paper presents a comprehensive theoretical analysis and an accurate calculation method of the dead-time required to achieve zero-voltage-switching (ZVS) in a battery charger with the phase-shifted full-bridge (PSFB) topology. Compared to previous studies, this is the first time that the effects of nonlinear output filter inductance, varied Miller Plateau length, and blocking capacitors have been considered. It has been found that the output filter inductance and the Miller Plateau have a significant influence on the dead-time for ZVS when the load current varies a lot in battery charger applications. In addition, the blocking capacitor, which is widely used to prevent saturation, reduces the circulating current and consequently affects the setting of the dead-time. In consideration of these effects, accurate analytical equations of the dead-time range for ZVS are deduced. Experimental results from a 1.5kW PSFB battery charger prototype shows that, with the proposed analysis, an optimal dead-time can be selected to meet the specific requirements of a system while achieving ZVS over wide load range.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.335-341
• /
• 1998

In this study, the dynamic characteritics in various loading methods for wear tester were investigated experimentally. As for the dead-weight, the pneumatic, and the hydraulic method, the load control performance against external disturbances was estimated under the several loading conditions like the different sliding speed, the varied normal load, and the misaligument. The hydraulic loading method showed the most stable loading performance of all the loading methods in the experiment.

• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.443-450
• /
• 2009

This paper deals with the design of decentralized controller for load-frequency control of interconnected power systems with superconducting magnetic energy storage units and Governor Dead Band Nonlinearity using Multi-Objective Evolutionary Algorithm. The superconducting magnetic energy storage unit exhibits favourable damping effects by suppressing the frequency oscillations as well as stabilizing the inter-area oscillations effectively. The proposed control strategy is mainly based on a compromise between Integral Squared Error and Maximum Stability Margin criteria. Analysis on a two-area interconnected thermal power system reveals that the proposed controller improves the dynamic performance of the system and guarantees good closed-loop stability even in the presence of nonlinearities and with parameter changes.