• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.4
• /
• pp.101-109
• /
• 1999

본 논문에서는 절연형 DC-DC 컨버터의 설계자동화 도구를 제시한다. 절연형 DC-DC 컨버터는 입력과 출력 측의 분리에 의한 회로 보호, 다중출력으로의 확장, 승압 및 강압의 용이성 등의 장점을 가지고 있다. 설계자동화의 과정은 여러 단계로 나눌 수 있다. 토폴로지 선택, 전압 및 전류용량이 적절한 스위치 소자 선택, 인덕턴스와 캐패시턴스의 값 결정, 그리고 변압기 설계의 순서로 컨버터 회로의 자동합성이 진행된다. C언어를 이용하여 자동화 도구를 구현하였고 SMPS 데이터 북으로부터 얻은 실제 회로의 사양을 가지고 다양한 컨버터 회로를 합성함으로 검증하였다.

• Digital Contents
• /
• no.1 s.152
• /
• pp.38-41
• /
• 2006

월간 "디지털콘텐츠"는 지난달 7일 '2006년 디지털콘텐츠(DC)산업의 과제와 전망'을 주제로 신년특집 좌담회를 개최했다. 보지 이창한 편지장의 사회로 진행된 이번 좌담회는 곽종철 정보통신부 IT정책자문단 SW/DC PM,권강현 삼성전자 디지털솔루션센터 상무, 권택민 한국소프트웨어진흥원(KIPA) 디지털콘텐츠사업단장, 위정현 중앙대 상경학부 교수(가나다 순)등이 패널로 참석.DC산업 전반에 대한 열띤 토론을 펼쳤다. 특히 참석자들은 디지털컨버전스등 컴퓨팅 환경 변화에 따른 새로운 DC의 필요성 여부, 대기업의 DC시장 진출 문제,DC 수출 편중 현상 등 현 DC업계 이슈에 대한 갑론을바을 벌였다.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.643-645
• /
• 1999

The conventional high frequency phase-shifted full bridge dc/dc converter has a disadvantage that a circulating current flows through transformer and switching devices during the freewheeling interval. Due to this circulating current, RMS current stress, conduction losses of transformer and switching devices are increased. To alleviate this problem, this paper provides a circulating current free type high frequency soft switching phase-shifted full bridge (FB) dc/dc converter with the modified energy recovery snubber (ERS) attached at the secondary side of transforemr.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.655-658
• /
• 1999

In this paper, Parallel operation of two DC-DC converters which we have ever done before need two CTs to do load current sharing. However, we have proposed a new method called ZCT method that can share load current with only a CT as doing parallel operation two converters with same converter capacity. To confirm parallel performance by a proposed DC-DC converter parallel operation method, we have done computer simulation and experiment. It is certain that we have showed to achieve two converters current sharing performance efficiently through simulation and experiment at result.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.8
• /
• pp.534-539
• /
• 1988

The dynamic chatacteristics and stability including steady state characteristic of the currentfed DC-to-DC converter with multiouput, which has a considerable advantage about the multioutut circuit,are analyzed in this paper. It is performed by using the steady state averaging method. As result, we know that the error, which is caused by secondary winding resistance of the transformer, exists between the two outputs in the steady state characteristics. Furthemore, it is verified that the current-fed DC-to-DC converter has also excellent stability in the multioutput application.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2505-2507
• /
• 1999

This paper presents novel self excited DC-DC converters such as Buck-boost type, Buck type and also non-inverting Buck-boost type. The proposed converters has the following advantages: simple topology, small number of circuit components, easy control methode. Therefore, these converters are suitable for the portable appliances with battery source. Theoretical analysis and experimental results for SOW class Buck-boost type self oscillation DC-DC converter have been obtained, which demonstrate the high efficiency and good performance.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2512-2514
• /
• 1999

A new zero voltage and zero current switching(ZVZCS) full bridge DC-DC converter with transformer isolation is proposed for arc welding machines. The proposed DC-DC converter uses an auxiliary transformer to obtain ZCS for leading leg, which provides load current control capability even in short circuit condition. The auxiliary circuit also operates in ZVZCS mode. The power rating of the auxiliary transformer is about 10% of the main transformer. The operation is verified by experiments for 12[KW] prototype.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.739-742
• /
• 1999

This study is to increase capability of the DC/DC converter (for PCS) in miniaturizing, stabilizing by locating an inductor with the structure of multi layer on to the glass/ceramic circuit board. When the DC/DC converter is stimulated. the characteristic operation of PWM switching circuit, losses. output power to input power, stability, efficiency and interfaces inside of control circuit and convener circuit are to be distinguished. The process would make it able to develop the techniques of designing and manufacturing of the converter of next generation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.609-612
• /
• 2007

This paper describes a new method to predict the load current of a dc-dc converter. The load current is calculated using the video information of the PDP. The output capacitance of the dc-dc converter can be reduced by utilizing the predicted load current, which results in a cost reduction of the power system in the PDP.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.129-133
• /
• 2005

This paper discusses DC/DC converter modeling using average model of switch and critical characterist. Average model of switch approach is expended to the modeling of boundary conduction mode DC/DC converters that operate at the boundary between Continuous Conduction Mode(CCM) and Discontinuous Conduction Mode(DCM). Frequency responses predicted by the average model of switch are verified by simulation and experiment.