• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.209-213
• /
• 2001

The reliability data analysis for components of CNC machining center is studied in this paper. The failure data of mechanical part is analyzed by Exponential, Weibull, and Log-normal distributions. And then, the optimum failure distribution model is selected by goodness of fit test. The reliability data analysis program is developed with ASP language to use on the Internet. The failure rate, MTBF, life, and failure mode of mechanical parts are estimated and searched by this program. The failure data and analysis results are stored in the database.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.270-274
• /
• 2000

We have developed the computer system with MOCT which is called "The Integrated National Groundwater Information system" since 1995 and now begin to supply the database and related informations for ground water by internet homepage. The integrated system is composed of four sub systems which are "Groundwater Information System", "DUREBAK", "Hydrogeologic Map Management System" and "Groundwater World Homepage". The local government offices use the "DUREBAK" program to manage the well development and maintenance. About 1,000,000 wells are managed in "DUREBAK" program and they submit the well database to MOCT every year. And now everyone can obtain the well data and other informations through internet homepage. We have set the standard process of data acquisition and management for ground water last four years.s of data acquisition and management for ground water last four years.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.4
• /
• pp.201-206
• /
• 2003

Power system is analyzed by three methods of load flow, fault calculation, and voltage stability. Among there, load flow is calculated to flow of power in power in system at steady state. But, load flow is difficult to analyze to flow of power in substation, because power flow frequently alter by various equipments such as circuit bleaker, disconnect switch and shunt reactor. Particular, in 765[㎸] system, because of form of 1.5GB for stable operation, structure of substation has been very complex. In this paper, we describe technique for application of load flow algorithm in simulator for 765[㎸] substation. For this technique, we built each database for various equipments and considered form of 1.5GB Data as form of bus and line, for application of load flow, are acquired from built database, and then calculate load flow in substation. And. results of load flow are outputted in screen of operator console program.

• Hwankyungkyoyuk
• /
• v.20 no.2
• /
• pp.25-35
• /
• 2007

The purpose of this study was to investigate the effect on the achievement of knowledge by animation-based learning program(ALP) in environmental education. The topic covered by ALP was "meaning and kinds of alien animals and plants". Four classes were selected and divided into two groups. The one was control group, and the other was treatment. 121 female the eighth graders(60 control and 61 ALP students) were piloted. Whereas control students learned using Powerpoint presentation-based materials, ALP students learned using web-based flash animations and animated database with images and movie clips. The score of knowledge achievement of ALP students was compared to control group students using ANCOVA, and then the score of ALP students was significantly higher than that of control group students(p<0.05). The ALP using animations and animated database was effective on the understanding of the alien animals and plants.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.4
• /
• pp.21-28
• /
• 2001

In this study, GNLP(GIS linked non-linear network analysis program) for pipeline system analysis has been developed. This GNLP gets the input data for pipeline analysis from existing GIS(geographic information system) data automatically, and has GUI(graphic user interface) for user. Non-Linear Method was used for hydraulic analysis of pipe network based on Hazen-Williams equation, and Microsoft Access of relational database management system(RDBMS) was used for the framework of database applied program. GNLP system environment program was improved so that a pipe network designer can input information data for hydraulic analysis of pipeline system more easily than that of existing models. Furthermore this model generate output such as pressure and water quantities in the form of a table and a chart, and also produces output data in Excel file. This model is also able to display data effectively for analysed data confirmation and query function which is the core of GIS program.

• Journal of Biomedical Engineering Research
• /
• v.35 no.4
• /
• pp.87-94
• /
• 2014

Recent technological advances have increased interest in personal health monitoring. Electrocardiogram(ECG) monitoring is a basic healthcare activity and can provide decisive information regarding cardiovascular system status. In this study, we developed a capacitive ECG measurement system that can be included within a cloth mattress pad. The device permits ECG data to be obtained during sleep by using capacitive electrodes. However, it is difficult to detect R-wave peaks automatically because signals obtained from the system can include a high level of noise from various sources. Because R-peak detection is important in ECG applications, we developed an algorithm that can reduce noise and improve detection accuracy under noisy conditions. Algorithm reliability was evaluated by determining its sensitivity(Se), positive predictivity(+P), and error rate(Er) by using data from the MIT-BIH Polysomnographic Database and from our capacitive ECG system. The results showed that Se = 99.75%, +P = 99.77%, and Er = 0.47% for MIT-BIH Polysomnographic Database while Se = 96.47%, +P = 99.32%, and Er = 4.34% for our capacitive ECG system. Based on those results, we conclude that our R-peak detection method is capable of providing useful ECG information, even under noisy signal conditions.

• Korean Journal of Veterinary Research
• /
• v.48 no.3
• /
• pp.375-379
• /
• 2008

Hips of the Golden and Labrador retrievers in Korea were evaluated with the University of Pennsylvania Hip Improvement Program (PennHIP) and the severity of joint laxity and degenerative joint disease (DJD) were compared to the PennHIP database. The distraction index (DI) of domestic Golden and Labrador retrievers was significantly higher than the DI of the PennHIP database. In the two breeds, the prevalence of DJD increased according to the DI. However, the severity of DJD did not show a positive correlation with the DI. Overweight dogs and dogs kept indoors showed more severe DJD and more prevalence of clinical signs. This report is thought to be the first case presentation of a large population of Golden and Labrador retrievers in Korea and the findings are representing the overall level of canine hip dysplasia (CHD) of domestic Retrievers, as the PennHIP method was not available in Korea until 2001. We can respect that the stock of retrievers can have a tighter hip joint through control of CHD using an accurate diagnostic method keyed to a phenotype especially concern for joint laxity using PennHIP method and an organized screening program. The clinical manifestation of dysplastic dog can be reduced through control of bodyweight and the environment with regular monitoring the hips with concern for joint laxity using PennHIP method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1252-1257
• /
• 2009

Off-line 6-DOF simulation program for store separation analysis has been developed. The developed program enables to predict a trajectory of a store from the database which was constructed by wind tunnel testing or CFD analysis. The flow angle method was applied to the program for predicting aerodynamic coefficients from the database and the ejector forces and constraints were enabled to incorporate the equations of motion for computing the trajectory. Using the program, the trajectories were calculated and the results are compared with the CTS results.

• Journal of Navigation and Port Research
• /
• v.33 no.9
• /
• pp.609-614
• /
• 2009

The traffic of tug/barges which are carrying construction materials, large plants for harbor development, or offshore structures has recently increased in the coast of Korea. The west and south coast of Korea are always congested due to a lot of islands and traffic concentration. Specially tug/barges have higher probability of marine accidents due to their bad maneuverability than others. Considering the operational circumstance and maneuverability, this study was to develop a wide-area monitoring and control system for tug/barges in the coastal area of Korea. The system was made in the form of three program modules i.e. navigation analysis program module, monitoring and control program module, database module. And seven functions were programmed to monitor and control the tug/barges efficiently. These are ship information search, tug/barge information and track management, designated area and safe navigation zone management, fairway management, accident data management, warning of danger, safety information management.

• The Journal of Society for e-Business Studies
• /
• v.7 no.1
• /
• pp.107-127
• /
• 2002

Database system parameter tuning is one of database system tuning that achieve to improve performance of database system with application program tuning and data model tuning. By parameter tuning adjusts value of entry that is staled in data dictionary's parameter file that is included to database system, it is thing which make relevant database system can display performance of most suitable. And, it is that achievement is one o( possible tuning method immediately without occurrence of additional expense or involved hardware for database system performance elevation and ashes composition of software. But, it is actuality that administration about parameter practical use is not achieved, and is using Default Value of parameter that database management system offers just as it is systematically. So, this paper presents parameter tuning process that can ：achieve Parameter tuning of database system that is operating present systematically, and parameter tuning process each activity important input urea and tuning achievement product. And explain about effect and result that happen by sort database system performance and parameters that it is affinity systematically, and grasp relationships between parameter, and change parameter of string database system. And not that parameter uses contents that specify by fixing when establish database administration system, is going to emphasize and explain that must utilize changing continuously during database system operation. It changes parameter entry value how in various kinds different operation environment and present if must apply, and will arrange effect that this parameter enoy value alteration gets in performance liking into account point that is actuality that is using parameter that define database administrators when install the database system just as it is continually without alteration.