• Geophysics and Geophysical Exploration
• /
• v.10 no.2
• /
• pp.131-137
• /
• 2007

With consideration of the first arrival picking methodology and inherent errors in picking process, I propose, from the computerization point of view, a practical algorithm for picking and error computation. The proposed picking procedure consists of 2-step; 1) picking the first coherent peak or trough events, 2) derive a line which approximates the record in the interval prior to the pick, and set the intercept time of the line as the first break. The length of fitting interval used in experiment, is few samples less than 1/4 width of the arriving wavelet. A quantitative measure of the error involved in first arrival picking is defined as the time length that needed to determine if an event is the first arrival or not. The time length is expressed as a function of frequency bandwidth of the signal and the S/N ratio. For 3 sets of cross-well seismic data, first breaks are picked twice, by manually, and by the proposed method. And at the same time, the error bound for each trace is computed. Experiment results show that good performance of the proposed picking method, and the usefulness of the quantitative error measure in pick-quality evaluation.

• Journal of Convergence for Information Technology
• /
• v.10 no.8
• /
• pp.35-39
• /
• 2020

DNN error is small compared to the conventional speech recognition system, DNN is difficult to parallel training, often the amount of calculations, and requires a large amount of data obtained. In this paper, we generate a phoneme unit to estimate the GMM parameters with each phoneme model parameters from the GMM to solve the problem efficiently. And it suggests ways to improve performance through clustering for a specific vocabulary to effectively apply them. To this end, using three types of word speech database was to have a DB build vocabulary model, the noise processing to extract feature with Warner filters were used in the speech recognition experiments. Results using the proposed method showed a 97.9% recognition rate in speech recognition. In this paper, additional studies are needed to improve the problems of improved over fitting.

• Journal of Digital Convergence
• /
• v.11 no.9
• /
• pp.103-111
• /
• 2013

As the demand-oriented management has been getting important in Supply Chain Management (SCM), various forecasting methods have been suggested including regression analyses. However, dependency structures among variables have been captured by a correlation coefficient, only. It results in inaccurate demand predictions. This paper suggests a new and effective forecasting modeling framework using student's t-copula function. In order to show overall modeling procedures framework, heavy tail typed numerical data and its copula estimations are provided. The suggested methodology can contribute to decrease the bullwhip effect and to stabilize volatile environment in a supply chain network.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.5
• /
• pp.39-45
• /
• 2008

The source parameters of 85 events ($1.6\;{\leq}\;M_L\;{\leq}\;4.9$) that occurred in and around the Korean Peninsula during 2006 and 2007 were analyzed by an iterative spectral fitting procedure. The data set consists of 487 S-wave trains on three-component seismograms recorded at broadband seismograph stations in the southern part of the Korean Peninsula. Moment magnitudes for each event were determined using spectral analyses of the seismograms, and the results were compared with the variation in corner frequencies with hypocentral distance. Corner frequencies have a tendency to decrease with increases in hypocentral distance, and the decrease is smaller the larger the moment magnitude. We define the measured corner frequency on a displacement spectrum as the apparent corner frequency. Although it was reported that the distance dependency of the corner frequency was found in some regions, such as the eastern Canadian Shield and the Baltic Shield, the origin of the phenomenon is not certain yet.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.1
• /
• pp.55-81
• /
• 1989

Recently the instantaneous center concept has been to understand the biomechanics by which a tissue derangement causes a mechanical derangement in human joint. Therefore, to understand the biomechanics of temporomandibular joint (T.M.J.) as a part of human joint, it is necessary to clarify the instantaneous center of rotation (I.C.R.) in the mandibular movement. Twenty male subjects without T.M.J. disorder and mandibular deviation during the mandibular movement were selected for this study. The habitual opening and closing paths were recorded on the paper of the sagittal metal plate by two pencil markers connected to the resin open clutch attached on the lower teeth, which was designed for this study. The coordinates of the 33-target points and the 109-anatomical landmarks were obtained using a Summagraphic digitizer connected to a 18AT computer. The original raw data of the opening and closing paths were smoothed by B-spline curve fitting technique and then the I.C.R. pathways were determined mathematically by the computer using algorithm for finding the I.C.R. of a planer rigid body model. Also the opening and closing movements of the mandible were simulated according to the determined I.C.R. The results obtained from this study were as follows. 1. At the early opening and the last closing, I.C.R's were almost distributed around the mastoid process outside the mandibular body without the presence in the region of the mandibular condyle. 2. The I.C.R. pathway showed variable patterns to each subject at the opening and closing movements. 3. The K constant with uniform pattern was obtained by the rotation angle times the radius, which was assumed to the index of the mandibular movement. 4. The opening and closing movements of the mandible were simulated by the I.C.R. pathways at the habitual opening and closing movements. 5. The mandibular condyle was rotated or translated accordng to the relative rotation angle and radius of the determinant factors of K contant.

• The Research Journal of the Costume Culture
• /
• v.11 no.6
• /
• pp.889-901
• /
• 2003

The purpose of this study is to look into the physical features for each residential area by the age, with the female subjects residing in Beijing and Shanghai. This would provide the specific information regarding the body types of Chinese adult women, and additionally it would assist the effective advancement into the Chinese local markets by serving as the basic data for the size development and fitting improvement of clothing products for Chinese women. The body measurements were made with 525 adult female subjects of 20 to 49 years of age, residing in Beijing and Shanghai, China. The number of measurements items was 79. The results are as follows: As they grew older, the women residing in Beijing and Shanghai all showed increases in the items of width, thickness, girth, and length, which are highly correlated with the physical obesity, while they did not show any differences by the age range in the item of height. Differences were also found in the tendency of the type distribution by the age range of Chinese adult women in each residential area. As they grew older, the women residing on Beijing showed increases in the distribution of Body type 2 and Body type 4, which clearly indicated the features of obesity. On the other hand, the women residing in Shanghai showed the almost similar distribution in their 20's and 30's, while those in their 40's showed a high frequency in Body type 2 than in Body type 4.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.507-512
• /
• 2012

Thin (~650 nm) and ultrathin (~50 nm) films of neat PMMA and PMMA containing 5 wt% of methacryl-polyhedral oligomeric silsesquioxane were prepared in this work. The effects of film thickness and POSS on glass transition temperature ($T_g$) and isothermal physical aging were investigated by means of differential scanning calorimetry (DSC). $T_g$ depression was observed as film thickness was decreased and Ma-POSS molecules were incorporated. Enthalpy relaxation (${\Delta}H_{Relax}$) due to the isothermal physical aging was reduced by ultra-thin film thickness and the addition of Ma-POSS. KWW (Kohlrausch-Williams-Watts) equation was used to fit ${\Delta}H_{Relax}$ vs. aging time data providing the fitting parameters; maximum enthalpy recovery (${\Delta}H_{\infty}$), relaxation time (${\tau}$) and non-exponentiality parameter (${\beta}$).

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1385-1393
• /
• 2014

Gas insulated switchgear (GIS) is widely used in the power systems, however, the contacts overheating of the inside circuit breaker or disconnector may be a potential cause of developing accidents. As the temperature of the contacts cannot be directly acquired due to existence of the metallic shield, an infrared sensor is adopted to directly measure the temperature of the shield and then the contacts temperature can be indirectly obtained by data fitting, based on which the on-line temperature monitoring technology specifically for GIS contacts based on infrared sensing is proposed in this paper. A real GIS test platform is constructed and experimental studies are carried out to account for the influential factors that affect the accuracy of the infrared temperature measurement. A heat transfer model of the GIS module is also developed, together with experimental studies, the nonlinear temperature relationship among the contacts, the metallic shield and the environment based on a neural network algorithm is established. Finally, an integrated on-line temperature monitoring system for the GIS contacts is developed for on-site applications.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.1 s.160
• /
• pp.44-56
• /
• 2007

The aim of this study is to provide fundamental data on the development of dress shirts pattern appropriate for the body types of athletes. The research subjects are 257 athletes from wrestling, bodybuilding, weight lifting, Judo, canoe, rowing. In regards to the category used in the measurement of bust somatotype, there are 48 types directly measured, 4 types indirectly measured, 7 types calculated and 1 bodyweight of type, making it 60 categories in total. The bust somatotype of a sports athlete and general person were compared together and after examining the characteristics of the bust somatotype, the somatotype of sports athlete was divided according to drop. The results of the study are as follows: 1. Questionnaire Results of the questionnaire showed that 63.4% of the respondents chose dress shirt as the most uncomfortable upper garment for athletes. And as for the result of the most uncomfortable body part turned out to be 'the neck is tight'. 2. Somatotype Analysis Results of direct, indirect measurement and the average somatotype of 97 National standard physique were compared. The characteristics of somatotype of athletes with well-developed upper body are that they are taller and have longer upper body and arms than the general person. And also the width of the trunk is wider, the girth bigger and the waist measure relatively slimmer. Looking at sports by category, it we could see that wrestlers were the largest neck parameter and width. Bodybuilders were the largest body parts for most categories. Weight lifting and Judo athletes were the largest waist and buttock. Canoe and rowing athletes were the largest height and arm parts. Dividing the somatotype of athletes according to drop, 72.8% of the research group belonged to the body type that resembled the letter Y.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.707-718
• /
• 2004

This study was conducted to evaluate the adequacy of an alternative a.m. - p.m. testing scheme for milk yield in comparison with the official test method based on weighing two milkings within 24 h. A total of 8,309 p.m. milking weights and 6,767 am. milking weights from 72 Holstein cows raised at N.L.R.I. were collected between October 2000 and November 2001. Seven statistical models were fitted to the data to derive formulas for estimating daily milk yields from morning or evening yields. In general, use of evening milkings less accurately estimated than did use morning rnilkings. Although the models do not differ much in the correlations between estimated and true daily milk yields, systematic under- and overestimation of daily milk yields were observed in all models with the exception of model 7, which accounted for heterogeneous variances by parity class, milking interval class, and lactation stage by fitting separate regression formulas within each combination of three factors.